microsoft.public.windowsce.platbuilder

• Thread Index

---

• Re: WinCE 5.0 RAM configuration
  • From: Voidcoder
• Re: CE device to act as USB Keyboard
  • From: Paul G. Tobey [eMVP]
• Re: CE device to act as USB Keyboard
  • From: GadgetmanStewart
• Re: Problems with PB 5.0 on Windows XP Laptops
  • From: Bill T
• Re: PCMCIA CF Card not accessible after two Suspends and Resumesin Wince5.0
  • From: Voidcoder
• Re: CE device to act as USB Keyboard
  • From: Bruce Eitman \(eMVP\)
• Re: CE device to act as USB Keyboard
  • From: Paul G. Tobey [eMVP]
• Re: WinCE 5.0 RAM configuration
  • From: Voidcoder
• Re: CE device to act as USB Keyboard
  • From: GadgetmanStewart
• calibration screen
  • From: Anand Prakash
• Re: CE device to act as USB Keyboard
  • From: Paul G. Tobey [eMVP]
• Re: WinCE 5.0 RAM configuration
  • From: Voidcoder
• CE device to act as USB Keyboard
  • From: GadgetmanStewart
• Re: Registry problems on SMDK2410
  • From: Sergeant
• Re: KITL Debug wiht DM9000
  • From: Voidcoder
• Re: Stop REATILMSG O/P at application Level
  • From: Voidcoder
• Registry problems on SMDK2410
  • From: Sergeant
• Re: WinCE 5.0 RAM configuration
  • From: Zhongwei Wang
• Re: Storage Block Driver API Test Case 4009
  • From: K. S. Huang
• Re: Storage Block Driver API Test Case 4009
  • From: K. S. Huang
• Re: StreamDriver XXX_Init() question
  • From: Duncan U. Harper
• Re: WinCE 5.0 RAM configuration
  • From: Dean Ramsier
• Re: WinCE 5.0 RAM configuration
  • From: Microsoft
• Re: USB device driver loading
  • From: Tucniak
• WinCE 5.0 RAM configuration
  • From: Microsoft
• Re: Problems with PB 5.0 on Windows XP Laptops
  • From: Valter Minute
• PCMCIA CF Card not accessible after two Suspends and Resumesin Wince5.0
  • From: Man_Biz
• command to update an existing project(.pbpxml) to a workspace(.pbx
  • From: YJ
• Re: Loadcepc /C: switch
  • From: Ole
• Re: StreamDriver XXX_Init() question
  • From: Helge Kruse
• Re: usb client suspend resume on pxa270
  • From: stonely
• Re: eboot failure!!! and image loading failed
  • From: deepak
• RE: EBoot RTL8169
  • From: deepak
• RE: Hive-Based file system not booting
  • From: gd.shukla
• Re: Stop REATILMSG O/P at application Level
  • From: Manish
• VBridge is not initialized! Bail out.. why?
  • From: cnlanbo@xxxxxxxx
• Re: KITL Debug wiht DM9000
  • From: red . army6007
• Re: Flash Driver
  • From: Chuck
• Re: Storage Block Driver API Test Case 4009
  • From: Chuck
• how to turn on kato debug zones
  • From: Chuck
• RE: StreamDriver XXX_Init() question
  • From: Charles Wang
• Hive-Based file system not booting
  • From: dru1967
• Re: Problems with PB 5.0 on Windows XP Laptops
  • From: Dean Ramsier
• Flash Driver
  • From: Anand Prakash
• Re: !!!!! Cannot load dll from network folder under CEPC WCE500 !!!!!
  • From: Paul G. Tobey [eMVP]
• Re: IXP4xx Processors
  • From: H. Edgar
• Re: Storage Block Driver API Test Case 4009
  • From: Chuck
• Loadcepc /C: switch
  • From: Ole
• Re: Startup sound distorted
  • From: voidcoder
• Re: Stop REATILMSG O/P at application Level
  • From: voidcoder
• Re: HalAllocateCommonBuffer and virtual addresses
  • From: Dean Ramsier
• Re: IXP4xx Processors
  • From: Dean Ramsier
• Re: Hive Registry problems
  • From: voidcoder
• Re: Hive Registry problems
  • From: Steve
• Re: Hive Registry problems
  • From: Steve
• Re: KITL Debug wiht DM9000
  • From: voidcoder
• cloning keyboard drivers
  • From: yamanalp
• Re: IXP4xx Processors
  • From: H. Edgar
• Re: IXP4xx Processors
  • From: H. Edgar
• Re: KITL Debug wiht DM9000
  • From: red . army6007
• Re: CS8900 Mac Address question!help!!
  • From: voidcoder
• Re: Startup sound distorted
  • From: voidcoder
• CS8900 Mac Address question!help!!
  • From: cnlanbo@xxxxxxxx
• Re: Stop REATILMSG O/P at application Level
  • From: voidcoder
• Re: KITL Debug wiht DM9000
  • From: voidcoder
• Re: Startup sound distorted
  • From: voidcoder
• Re: How to control GPIO pins by SW?
  • From: voidcoder
• KITL Debug wiht DM9000
  • From: red . army6007
• RE: 我用PB5.0定制了一个内核（SMDK2410），采用EBOOT下载到RAM中运行一切正常，但写到NAND卡上运行时不能配置CS89
  • From: gd.shukla
• Re: !!!!! Cannot load dll from network folder under CEPC WCE500 !!!!!
  • From: Cyril
• Re: Question about IST "Concept"
  • From: bluesphere
• Re: How to do an IOCTL_NDISUIO_SET_OID_VALUE when WZC controls the
  • From: "Soemin Tjong [MSFT]"
• Re: Question about IST "Concept"
  • From: fransgeldhof
• Re: Explorer shell lockup
  • From: K. S. Huang
• Re: Question about IST "Concept"
  • From: bluesphere
• Re: Explorer shell lockup
  • From: coder
• Re: Storage Block Driver API Test Case 4009
  • From: K. S. Huang
• Re: Explorer shell lockup
  • From: K. S. Huang
• Re: Explorer shell lockup
  • From: voidcoder
• Re: Explorer shell lockup
  • From: voidcoder
• Re: Explorer shell lockup
  • From: coder
• Re: Explorer shell lockup
  • From: voidcoder
• Re: Explorer shell lockup
  • From: coder
• Re: Explorer shell lockup
  • From: voidcoder
• Re: Explorer shell lockup
  • From: coder
• Re: Question about IST "Concept"
  • From: fransgeldhof
• Re: Question about IST "Concept"
  • From: Steve Maillet \(eMVP\)
• Re: Explorer shell lockup
  • From: voidcoder
• Re: Explorer shell lockup
  • From: voidcoder
• Re: Question about IST "Concept"
  • From: fransgeldhof
• Re: Question about IST "Concept"
  • From: Steve Maillet \(eMVP\)
• Question about IST "Concept"
  • From: fransgeldhof
• Re: CSEH Unable to connect?
  • From: voidcoder
• Re: Platform Builder was unable to read the device settings from ..
  • From: voidcoder
• Re: Building Bootloader
  • From: navneet . turaskar
• 我用PB5.0定制了一个内核（SMDK2410），采用EBOOT下载到RAM中运行一切正常，但写到NAND卡上运行时不能配置CS8900网卡，显示MAC地址为0.0.0.0，请问何故？
  • From: cnlanbo
• Re: HalAllocateCommonBuffer and virtual addresses
  • From: bluesphere
• Re: platform build output window
  • From: Voidcoder
• Re: USB Functional Serial client vs. PC host as COM-port
  • From: Voidcoder
• Storage Block Driver API Test Case 4009
  • From: Chuck dot Lin at Symbol dot COM
• Re: IXP4xx Processors
  • From: Dean Ramsier
• Re: usb client suspend resume on pxa270
  • From: Voidcoder
• Re: IXP4xx Processors
  • From: Jules . Karim
• BUG: ExtEscape( hLCD, SETPOWERMANAGMENT ) doesn't work as expected
  • From: Holger
• Re: IXP4xx Processors
  • From: Bruce Eitman \(eMVP\)
• Re: Can NOT go into System Idle Mode ??
  • From: dirw
• IXP4xx Processors
  • From: H. Edgar
• Re: "The system cannot find the path specified" in PlatformBuilder
  • From: Steve Maillet \(eMVP\)
• Re: Cloned BSP won't build
  • From: gerrit
• Re: Kernel halt at this place
  • From: Steve Maillet \(eMVP\)
• Re: HalAllocateCommonBuffer and virtual addresses
  • From: Dean Ramsier
• Re: eboot failure!!! and image loading failed
  • From: Ole
• platform build output window
  • From: ozby
• Re: USB Functional Serial client vs. PC host as COM-port
  • From: Bølla
• Re: CMOS Sensor for PXA270
  • From: bluesphere
• !!!!! Cannot load dll from network folder under CEPC WCE500 !!!!!
  • From: Cyril
• problem in connecting to modem via RAS server
  • From: lntscm05
• Re: Building Bootloader
  • From: Valter Minute
• Re: NdisMRegisterInterrupt on Intel PXA 270
  • From: Valter Minute
• Re: CMOS Sensor for PXA270
  • From: Valter Minute
• Re: how to Power manager
  • From: Edouard Dessioux
• Kernel halt at this place
  • From: Brian
• Re: CMOS Sensor for PXA270
  • From: shinose
• Re: usb client suspend resume on pxa270
  • From: stonely
• Re: Can NOT go into System Idle Mode ??
  • From: Tom Gensel \(eMVP\)
• Re: Problem with thirdparty BSPs in Pb5.0
  • From: Brian
• Re: how to Power manager
  • From: Michel Verhagen (eMVP)
• Re: how to Power manager
  • From: Michel Verhagen (eMVP)
• Re: Cloned BSP won't build
  • From: Michel Verhagen (eMVP)
• BUG REPORT: Error Report Control Panel Applet
  • From: Michel Verhagen (eMVP)
• Problem with thirdparty BSPs in Pb5.0
  • From: Brian
• Re: Cloned BSP won't build
  • From: gerrit
• Re: Cloned BSP won't build
  • From: gerrit
• Re: CMOS Sensor for PXA270
  • From: bluesphere
• Re: USB Functional Serial client vs. PC host as COM-port
  • From: Voidcoder
• Cloned BSP won't build
  • From: gerrit
• Re: CS8900A Driver help
  • From: Voidcoder
• Re: USB Functional Serial client vs. PC host as COM-port
  • From: Voidcoder
• Re: Web Server DMZ behavior?
  • From: John Spaith [MS]
• Re: CMOS Sensor for PXA270
  • From: shinose
• Re: CMOS Sensor for PXA270
  • From: Paul G. Tobey [eMVP]
• Re: CMOS Sensor for PXA270
  • From: shinose
• Re: Failed to add MFC to the platform
  • From: Voidcoder
• Re: CMOS Sensor for PXA270
  • From: Paul G. Tobey [eMVP]
• Re: A Very Strange problem on PXA270 with PB5.0 Intel BSP
  • From: Voidcoder
• Re: CS8900A Driver help
  • From: Voidcoder
• Re: CMOS Sensor for PXA270
  • From: shinose
• Re: CMOS Camera Modules and PXA270
  • From: shinose
• Re: CMOS Sensor for PXA270
  • From: Paul G. Tobey [eMVP]
• CMOS Sensor for PXA270
  • From: shinose
• Re: A Very Strange problem on PXA270 with PB5.0 Intel BSP
  • From: Voidcoder
• Re: Can NOT go into System Idle Mode ??
  • From: Tom Gensel \(eMVP\)
• Re: usb client suspend resume on pxa270
  • From: Voidcoder
• Re: Can NOT go into System Idle Mode ??
  • From: Tom Gensel \(eMVP\)
• Re: Building Bootloader
  • From: Norman Rericha
• Re: HalAllocateCommonBuffer and virtual addresses
  • From: Steve Maillet \(eMVP\)
• Re: Service and SysAllocString
  • From: Steve Maillet \(eMVP\)
• Service and SysAllocString
  • From: AJM42
• NdisMRegisterInterrupt on Intel PXA 270
  • From: mail2mgupta
• Re: CS8900A Driver help
  • From: ce
• Re: CS8900A Driver help
  • From: ce
• Re: Target Control not running (WCE 5.00, PXA255)
  • From: Niels Brouwers
• Re: A Very Strange problem on PXA270 with PB5.0 Intel BSP
  • From: Brian
• Modify the path of the mail
  • From: Edouard Dessioux
• Re: FTP Server for Windows CE 5.0
  • From: zumzuru
• Failed to add MFC to the platform
  • From: Rolf
• Re: Batchfiles & errorlevel
  • From: Helge Kruse
• Re: A Very Strange problem on PXA270 with PB5.0 Intel BSP
  • From: Brian
• Re: CS8900A Driver help
  • From: ce
• ethernet download failed
  • From: jxzrobert
• Batchfiles & errorlevel
  • From: JORABO
• Fontlinking with AC3 Font Simsun
  • From: ooK
• Re: Building Bootloader
  • From: Brian
• A Very Strange problem on PXA270 with PB5.0 Intel BSP
  • From: Brian
• Building Bootloader
  • From: CiticPacific
• Re: disable CE from using the single com port for its own debug uses
  • From: Yannick Chamming's [eMVP]
• Re: CS8900A Driver help
  • From: ce
• Re: error of build image
  • From: calvin
• Re: error of build image
  • From: Michel Verhagen (eMVP)
• Re: usb client suspend resume on pxa270
  • From: stonely
• Re: checking and Copying a file when system is Loading
  • From: voidcoder
• Re: checking and Copying a file when system is Loading
  • From: Manish
• Re: disable CE from using the single com port for its own debug uses
  • From: Voidcoder
• Re: Learning For Direct show
  • From: Michel Verhagen (eMVP)
• RE: Web Server DMZ behavior?
  • From: Corey Burke [MS]
• Re: disable CE from using the single com port for its own debug uses
  • From: Voidcoder
• Re: Regarding Direct3DMobile
  • From: Don Crouch
• Re: How to remove the backlight applet in the Display control pane
  • From: voidcoder
• Re: usb client suspend resume on pxa270
  • From: Voidcoder
• Re: .nb0 and .abx files
  • From: Voidcoder
• Re: How to remove the backlight applet in the Display control pane
  • From: Dean Ramsier
• Re: Low memory problem
  • From: Dean Ramsier
• Re: usb client suspend resume on pxa270
  • From: Voidcoder
• Re: checking and Copying a file when system is Loading
  • From: Voidcoder
• Re: CS8900A Driver help
  • From: Voidcoder
• Re: Visual Studio.net Professional
  • From: Tweeeek
• Re: FTP Server for Windows CE 5.0
  • From: Marcelovk
• Uninstall of CE 4.2 causes problems
  • From: Jordan
• Re: Visual Studio.net Professional
  • From: Tweeeek
• Re: Visual Studio.net Professional
  • From: Paul G. Tobey [eMVP]
• Re: About SIP and IM problem
  • From: Paul G. Tobey [eMVP]
• Re: FTP Server for Windows CE 5.0
  • From: zumzuru
• Re: Winceos.bat file
  • From: Steve Maillet \(eMVP\)
• Re: .nb0 and .abx files
  • From: Steve Maillet \(eMVP\)
• Re: Target Control not running (WCE 5.00, PXA255)
  • From: Niels Brouwers
• Re: control panel has two columns instead of three
  • From: Tarun
• Re: CS8900A Driver help
  • From: K. S. Huang
• Re: Visual Studio.net Professional
  • From: tweeeek
• Re: disable CE from using the single com port for its own debug uses
  • From: Ole
• Temporary remove .vol
  • From: Edouard Dessioux
• disable CE from using the single com port for its own debug uses
  • From: Ole
• Re: Shared Memory Between The Driver and The Device
  • From: ucoklar
• Re: usb client suspend resume on pxa270
  • From: mobilevil
• Shared Memory Between The Driver and The Device
  • From: ucoklar
• Re: CS8900A Driver help
  • From: ce
• Re: CS8900A Driver help
  • From: ce
• Re: ActiveSync over Ethernet?
  • From: Yannick Chamming's [eMVP]
• Re: How to remove the backlight applet in the Display control pane
  • From: Yannick Chamming's [eMVP]
• Re: Winceos.bat file
  • From: Yannick Chamming's [eMVP]
• Re: usb client suspend resume on pxa270
  • From: stonely
• Regarding Direct3DMobile
  • From: Prashant
• About SIP and IM problem
  • From: David
• Re: bthutil.dll missing in CE
  • From: Greg Scott [MS]
• Re: CS8900A Driver help
  • From: K. S. Huang
• Audio Mixer
  • From: dingcl
• Re: error of build image
  • From: calvin
• Re: error of build image
  • From: calvin
• Re: AciveSync serial connection problems
  • From: Brian Crofts
• Re: evc4.0 connet with develope board problem
  • From: Voidcoder
• Re: LAN91C111 KITL and Lubbock similar board
  • From: Voidcoder
• Re: evc4.0 connet with develope board problem
  • From: Voidcoder
• Re: evc4.0 connet with develope board problem
  • From: Voidcoder
• Re: Slow Explorer in 5.0
  • From: Chris Tacke, MVP
• Re: HELP - Large SIP keyboard freezes in mid-key press in WinCE 5.02
  • From: cdg
• Re: KITL error
  • From: Voidcoder
• Re: InjectDLL - supported in winCE ?
  • From: Steve Maillet \(eMVP\)
• Re: InjectDLL - supported in winCE ?
  • From: Tom Gensel \(eMVP\)
• Build problem CE 4.2
  • From: sidprice
• Re: evc4.0 connet with develope board problem
  • From: Voidcoder
• Re: Target Control not running (WCE 5.00, PXA255)
  • From: Upender R. Sandadi [MSFT]
• Re: How to remove the backlight applet in the Display control panel
  • From: Dean Ramsier
• Re: Write Run-Time Image to Flash... not working
  • From: Dean Ramsier
• Re: error of build image
  • From: Voidcoder
• Re: checking and Copying a file when system is Loading
  • From: Voidcoder
• Re: How can I prevent startup sound from playing on cold boot?
  • From: gerrit
• Re: cepc floppy disk driver
  • From: SergeiR
• ANN: Reminder: Windows CE Live Chat Tomorrow!
  • From: Sue Loh [MS]
• Re: Low memory problem
  • From: Sue Loh [MS]
• Re: Slow Explorer in 5.0
  • From: Sue Loh [MS]
• Re: checking and Copying a file when system is Loading
  • From: Bruce Eitman \(eMVP\)
• Re: error of build image
  • From: Bruce Eitman \(eMVP\)
• Re: Low memory problem
  • From: Norman Rericha
• Re: serial number to Platform Builder 4.2
  • From: Tom Gensel \(eMVP\)
• Re: evc4.0 connet with develope board problem
  • From: xinchen
• Re: CS8900A Driver help
  • From: ce
• Re: evc4.0 connet with develope board problem
  • From: xinchen
• Re: LAN91C111 KITL and Lubbock similar board
  • From: Marcelovk
• Re: how the dll is built when do sysgen in pb5.0
  • From: Bruce Eitman \(eMVP\)
• Re: evc4.0 connet with develope board problem
  • From: xinchen
• Re: Bluetooth "discoverable" ??
  • From: Chris Edgington
• Bluetooth "discoverable" ??
  • From: skindiver
• Re: how the dll is built when do sysgen in pb5.0
  • From: niels.brouwers_FOOLSPAM_@xxxxxxxx
• Re: evc4.0 connet with develope board problem
  • From: xinchen
• Problem to build SDK with debug information PlatforBuilder 5.0
  • From: Davidw
• KITL error
  • From: ms
• Re: AciveSync serial connection problems
  • From: Remi de Gravelaine
• Re: ActiveSync over Ethernet?
  • From: K. S. Huang
• Re: serial number to Platform Builder 4.2
  • From: Rados3aw Michalski
• ActiveSync over Ethernet?
  • From: orc
• Re: error of build image
  • From: Gunnar Frenzel
• evc4.0 connet with develope board problem
  • From: xinchen
• Re: RNDIS PDD
  • From: lesson
• Re: how the dll is built when do sysgen in pb5.0
  • From: fowenbin
• Re: how the dll is built when do sysgen in pb5.0
  • From: Yannick Chamming's [eMVP]
• how the dll is built when do sysgen in pb5.0
  • From: fowenbin
• RE: SSP driver & DMA
  • From: Sam
• Re: serial number to Platform Builder 4.2
  • From: Tom Gensel \(eMVP\)
• Re: WM5 ROM DLLs Not In Slot 1
  • From: Steve Maillet \(eMVP\)
• Re: LAN91C111 KITL and Lubbock similar board
  • From: voidcoder
• Re: LAN91C111 KITL and Lubbock similar board
  • From: Bruce Eitman \(eMVP\)
• Re: WM5 ROM DLLs Not In Slot 1
  • From: Chris Edgington
• Re: LAN91C111 KITL and Lubbock similar board
  • From: voidcoder
• LAN91C111 KITL and Lubbock similar board
  • From: Marcelovk
• Re: Including KD.DLL
  • From: Tom Gensel \(eMVP\)
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Tom Gensel \(eMVP\)
• Re: A very strange problem in WinCE.PLS help.
  • From: Tom Gensel \(eMVP\)
• Re: Slow Explorer in 5.0
  • From: Chris Tacke, MVP
• Re: Slow Explorer in 5.0
  • From: Sue Loh [MS]
• Re: cepc floppy disk driver
  • From: SergeiR
• Re: bthutil.dll missing in CE
  • From: Paul G. Tobey [eMVP]
• Re: CS8900A Driver help
  • From: Voidcoder
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Voidcoder
• Re: bthutil.dll missing in CE
  • From: A.User
• Re: how can i make use of eVC++ for developing applications ?
  • From: Bruce Eitman \(eMVP\)
• Re: WM5 ROM DLLs Not In Slot 1
  • From: Steve Maillet \(eMVP\)
• Re: Changing BLDR splash logo
  • From: Bruce Eitman \(eMVP\)
• Re: WM5 ROM DLLs Not In Slot 1
  • From: John Eldridge [MSFT]
• Re: CS8900A Driver help
  • From: K. S. Huang
• Re: Changing BLDR splash logo
  • From: K. S. Huang
• Re: serial number to Platform Builder 4.2
  • From: Paul G. Tobey [eMVP]
• Re: I install PB5 but not found "Mobile Phone Template" anywhere.How
  • From: Paul G. Tobey [eMVP]
• Re: bthutil.dll missing in CE
  • From: Paul G. Tobey [eMVP]
• Re: I install PB5 but not found "Mobile Phone Template" anywhere.How
  • From: Bruce Eitman \(eMVP\)
• Re: Regarding MS ActiveSync and Platform Builder
  • From: niels.brouwers_FOOLSPAM_@xxxxxxxx
• Re: AciveSync serial connection problems
  • From: Brian Crofts
• serial number to Platform Builder 4.2
  • From: Rados3aw Michalski
• Target Control not running (WCE 5.00, PXA255)
  • From: niels.brouwers_FOOLSPAM_@xxxxxxxx
• Re: WM5 ROM DLLs Not In Slot 1
  • From: Chris Edgington
• Re: how can i make use of eVC++ for developing applications ?
  • From: Dan McCarty
• Re: Automatic update of network adapters (when plug/unplug LAN cable)
  • From: sylph
• Re: Including KD.DLL
  • From: Chris Edgington
• Re: AMD GX2 Power Button Control
  • From: Steve Maillet \(eMVP\)
• Re: FATFS Sector size greater than 512 in wince 5.0
  • From: Steve Maillet \(eMVP\)
• Re: Memory Error?help
  • From: Mike
• AMD GX2 Power Button Control
  • From: edgar
• Re: pbxmlutils.exe is missing Install Dirs in Registry
  • From: Gunnar Frenzel
• Regarding MS ActiveSync and Platform Builder
  • From: Sameer
• During run the WINCE stress test which in the CETK of CEPB5.0,the device is hanged.
  • From: Ying Rong Jun
• Re: FATFS Sector size greater than 512 in wince 5.0
  • From: prabha
• Re: Memory Error?help
  • From: Jinrong
• Re: how can i make use of eVC++ for developing applications ?
  • From: Jinrong
• how can i make use of eVC++ for developing applications ?
  • From: kiran.india@xxxxxxxxx
• Re: cepc floppy disk driver
  • From: Yannick Chamming's [eMVP]
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Ying Rong Jun
• Re: How to do a CLEAN SYSGEN in PB4.2
  • From: Brian
• Re: How to do a CLEAN SYSGEN in PB4.2
  • From: Brian
• How to do a CLEAN SYSGEN in PB4.2
  • From: Brian
• Re: A very strange problem in WinCE.PLS help.
  • From: Brian
• Re: Replace the "hourglass" cursor on the PB5.0
  • From: SP
• CS8900A Driver help
  • From: ce
• Re: Memory Error?help
  • From: John Eldridge [MSFT]
• Memory Error?help
  • From: LILO
• Re: AciveSync serial connection problems
  • From: Remi de Gravelaine
• SDIO card driver (receiving interrupt issue)
  • From: r.b.
• Re: Including KD.DLL
  • From: John Eldridge [MSFT]
• Re: WM5 ROM DLLs Not In Slot 1
  • From: John Eldridge [MSFT]
• Re: FATFS Sector size greater than 512 in wince 5.0
  • From: Steve Maillet \(eMVP\)
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Tom Gensel \(eMVP\)
• bthutil.dll missing in CE
  • From: skindiver
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: news.microsoft.com
• FATFS Sector size greater than 512 in wince 5.0
  • From: prabha
• CETK / OAL Timer Test
  • From: xl
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Voidcoder
• Re: How can I prevent startup sound from playing on cold boot?
  • From: Paul G. Tobey [eMVP]
• Re: How can I prevent startup sound from playing on cold boot?
  • From: gerrit
• Re: I just can't get file sharing to work!
  • From: Voidcoder
• Re: How can I prevent startup sound from playing on cold boot?
  • From: Paul G. Tobey [eMVP]
• How can I prevent startup sound from playing on cold boot?
  • From: gerrit
• Re: Error running pbxmlutils.exe
  • From: Doug Cook [MSFT]
• Re: pbxmlutils.exe is missing Install Dirs in Registry
  • From: Doug Cook [MSFT]
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Voidcoder
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Voidcoder
• Re: How to make the target as massstorage device???
  • From: Voidcoder
• Re: LAN91C111 Bootloader Xscale only receiving BroadCasts
  • From: Marcelovk
• Re: Repllog.exe sync with ActiveSync problem?
  • From: Bruce Eitman \(eMVP\)
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Voidcoder
• Re: Unable to load stream interface driver
  • From: Bruce Eitman \(eMVP\)
• Re: Relation between WAV_Init() and WMDD_Init() ?(or called sequence)
  • From: Dean Ramsier
• Re: Getting started help - boot loader
  • From: Paul G. Tobey [eMVP]
• Re: Getting started help - boot loader
  • From: orc
• Re: Unable to load stream interface driver
  • From: Voidcoder
• Slow Explorer in 5.0
  • From: Piet
• Re: I just can't get file sharing to work!
  • From: Voidcoder
• Re: LAN91C111 Bootloader Xscale only receiving BroadCasts
  • From: Voidcoder
• Re: System Event Sound definitions in Registry
  • From: gerrit
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Voidcoder
• Re: Getting started help - boot loader
  • From: Paul G. Tobey [eMVP]
• Getting started help - boot loader
  • From: orc
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Tom Gensel \(eMVP\)
• Re: When will MS fix the WinCE USB Mass Storage Problems?
  • From: Rob
• Re: How to debug bootloader using ARM eXDI driver for Windows CE P
  • From: Michael Chen [MS]
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Panino
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: news.microsoft.com
• Re: A very strange problem in WinCE.PLS help.
  • From: Tom Gensel \(eMVP\)
• Re: When will MS fix the WinCE USB Mass Storage Problems?
  • From: Rob
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: news.microsoft.com
• Re: Including KD.DLL
  • From: Steve Maillet \(eMVP\)
• Re: Intel PXA255 I2S interface Windows CE device driver
  • From: Steve Maillet \(eMVP\)
• Re: I just can't get file sharing to work!
  • From: Jim
• Re: I just can't get file sharing to work!
  • From: Jim
• Re: I just can't get file sharing to work!
  • From: Jim
• pbxmlutils.exe is missing Install Dirs in Registry
  • From: Gunnar Frenzel
• Intel PXA255 I2S interface Windows CE device driver
  • From: anbeyon
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Panino
• Re: LAN91C111 on XSC1BD
  • From: Fornazin
• Re: How to make the target as massstorage device???
  • From: Henrik Viklund
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Panino
• AlphaBlend
  • From: Shijin
• Re: How to make the target as massstorage device???
  • From: Rashmi T S
• Re: A very strange problem in WinCE.PLS help.
  • From: Helge Kruse
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Panino
• Re: System Event Sound definitions in Registry
  • From: Anthony Pellerin
• How to change folder for CAB - unload file?
  • From: ooK
• Re: Boot up filesys problems (relfsd hang up)
  • From: niels.brouwers_FOOLSPAM_@xxxxxxxx
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Ying Rong Jun
• Re: A very strange problem in WinCE.PLS help.
  • From: Brian
• Re: Command Processor over Serial
  • From: turnsek
• parallel port Dot matrix printer problem
  • From: Pradip Shinde
• Re: A very strange problem in WinCE.PLS help.
  • From: Brian
• Re: A very strange problem in WinCE.PLS help.
  • From: Tom Gensel \(eMVP\)
• Re: How to make the target as massstorage device???
  • From: Henrik Viklund
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Panino
• A very strange problem in WinCE.PLS help.
  • From: Brian
• How to make the target as massstorage device???
  • From: Rashmi T S
• Including KD.DLL
  • From: Chris Edgington
• Re: Registry settings for host driver dll loading
  • From: meribha . sherline
• Re: Replace the "hourglass" cursor on the PB5.0
  • From: Michel Verhagen (eMVP)
• Re: Registry settings for host driver dll loading
  • From: meribha . sherline
• Re: Registry settings for host driver dll loading
  • From: meribha . sherline
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Tom Gensel \(eMVP\)
• Re: Relation between WAV_Init() and WMDD_Init() ?(or called sequence)
  • From: shortstop
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Ying Rong Jun
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Ying Rong Jun
• Re: Unable to load stream interface driver
  • From: Faiz
• Re: System Event Sound definitions in Registry
  • From: gerrit
• Re: CreateNewProc failure on touchcalibrate.exe
  • From: Paul G. Tobey [eMVP]
• OHCI bug in CTransfer
  • From: Bryan Bassett
• Re: With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: Tom Gensel \(eMVP\)
• I just can't get file sharing to work!
  • From: Jim
• Re: Command Processor over Serial
  • From: Brian Bender
• Re: Command Processor over Serial
  • From: Dean Ramsier
• Re: pcmcia au1100
  • From: prgmr
• Re: Missing PB private sources
  • From: Paul G. Tobey [eMVP]
• Missing PB private sources
  • From: Nelson
• Re: Automatic update of network adapters (when plug/unplug LAN cable)
  • From: Paul G. Tobey [eMVP]
• Re: Disable Software input panel auto pop
  • From: Paul G. Tobey [eMVP]
• Re: Command Processor over Serial
  • From: Paul G. Tobey [eMVP]
• Re: WM5 ROM DLLs Not In Slot 1
  • From: Chris Edgington
• With the PXA272,I can't read the GPIO and Interrupt status register.
  • From: news.microsoft.com
• Automatic update of network adapters (when plug/unplug LAN cable)
  • From: sylph
• Re: Relation between WAV_Init() and WMDD_Init() ?(or called sequence)
  • From: Dean Ramsier
• Re: Boot up filesys problems (relfsd hang up)
  • From: Dean Ramsier
• Re: System Event Sound definitions in Registry
  • From: gerrit
• Re: LAN91C111 Bootloader Xscale only receiving BroadCasts
  • From: Marcelovk
• Re: LAN91C111 Bootloader Xscale only receiving BroadCasts
  • From: Anthony Pellerin
• Re: Customise build for PXA270
  • From: Steve Maillet \(eMVP\)
• Re: WM5 ROM DLLs Not In Slot 1
  • From: Steve Maillet \(eMVP\)
• LAN91C111 Bootloader Xscale only receiving BroadCasts
  • From: Marcelovk
• Re: Starting Point...
  • From: Henrik Viklund
• Re: how can i use variable to add ie in wince5.0
  • From: xinchen
• Re: Boot up filesys problems (relfsd hang up)
  • From: niels.brouwers_FOOLSPAM_@xxxxxxxx
• Starting Point...
  • From: Gaurav Vaish
• Re: Disable Software input panel auto pop
  • From: ohady
• Re: increasing RAM to 128 MB in winCE5.0
  • From: Valter Minute
• Re: Replace the "hourglass" cursor on the PB5.0
  • From: SP
• Relation between WAV_Init() and WMDD_Init() ?(or called sequence)
  • From: shortstop
• Repllog.exe sync with ActiveSync problem?
  • From: 阿隆西
• Re: increasing RAM to 128 MB in winCE5.0
  • From: lntscm05
• Re: Command Processor over Serial
  • From: turnsek
• Re: increasing RAM to 128 MB in winCE5.0
  • From: lntscm05
• Re: WM5 ROM DLLs Not In Slot 1
  • From: Chris Edgington
• Re: WM5 ROM DLLs Not In Slot 1
  • From: Steve Maillet \(eMVP\)
• System Event Sound definitions in Registry
  • From: gerrit
• WinCE Update releases for the month of January 2006
  • From: QFE Admin \(MS\)
• Re: Explorer and AYGSHELL dependencies
  • From: gerrit
• Re: Command Processor over Serial
  • From: Voidcoder
• Re: Explorer and AYGSHELL dependencies
  • From: Steve Maillet \(eMVP\)
• Re: LAN91C111 on XSC1BD
  • From: Voidcoder
• Re: Error running pbxmlutils.exe
  • From: jaikumar.selvaraj@xxxxxxxxx
• Howto force module section loading
  • From: Nelson
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Remi de Gravelaine
• Re: Explorer and AYGSHELL dependencies
  • From: gerrit
• Re: Explorer and AYGSHELL dependencies
  • From: gerrit
• Re: Replace the "hourglass" cursor on the PB5.0
  • From: Michel Verhagen (eMVP)
• WM5 ROM DLLs Not In Slot 1
  • From: Chris Edgington
• Explorer and AYGSHELL dependencies
  • From: Steve Maillet \(eMVP\)
• Re: PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: voidcoder
• Re: Error running pbxmlutils.exe
  • From: Steve Maillet \(eMVP\)
• Error running pbxmlutils.exe
  • From: jaikumar@xxxxxxxxxxxx
• Re: How to a driver for this hardware
  • From: Voidcoder
• Re: IsAPIReady(SH_SHELL) and shell components
  • From: gerrit
• Re: Command Processor over Serial
  • From: voidcoder
• Re: LAN91C111 on XSC1BD
  • From: voidcoder
• Re: Command Processor over Serial
  • From: Voidcoder
• Re: Disable Software input panel auto pop
  • From: Anthony Pellerin
• Re: How to a driver for this hardware
  • From: Voidcoder
• Re: LAN91C111 on XSC1BD
  • From: Fornazin
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Steve Maillet \(eMVP\)
• Re: Problem with USB Mass Storage Devices
  • From: Gunnar Frenzel
• PXA270 + SMSC LAN9115 under Win CE 5.0
  • From: Panino
• Re: Boot up filesys problems (relfsd hang up)
  • From: Dean Ramsier
• Re: Problem with USB Mass Storage Devices
  • From: Rob
• CE50 QFE -> display corruption
  • From: Albert
• Re: newbie CE/pocketpc Driver development question!!!
  • From: Paul G. Tobey [eMVP]
• Re: How can I flush system's IP since I changed IP by programing registry values?
  • From: Paul G. Tobey [eMVP]
• Re: Command Processor over Serial
  • From: Paul G. Tobey [eMVP]
• Re: Boot up filesys problems (relfsd hang up)
  • From: Tom Gensel \(eMVP\)
• Re: Command Processor over Serial
  • From: Alex Malamud
• Re: Boot up filesys problems (relfsd hang up)
  • From: niels.brouwers_FOOLSPAM_@xxxxxxxx
• Re: Boot up filesys problems (relfsd hang up)
  • From: Dean Ramsier
• Re: how can i use variable to add ie in wince5.0
  • From: Tom Gensel \(eMVP\)
• Boot up filesys problems (relfsd hang up)
  • From: niels.brouwers_FOOLSPAM_@xxxxxxxx
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: ucoklar
• Re: Command Processor over Serial
  • From: Alex Malamud
• newbie CE/pocketpc Driver development question!!!
  • From: Mingyi
• newbie CE/pocketpc Driver development question!!!
  • From: Mingyi
• How can I flush system's IP since I changed IP by programing registry values?
  • From: carl
• Re: LAN91C111 on XSC1BD
  • From: Fornazin
• how can i chang the wince5.0 and pc connextion baud rate
  • From: xinchen
• Re: How to flash Kernel Image ( NK.bin) over JTAG
  • From: Dean Ramsier
• how can i use variable to add ie in wince5.0
  • From: xinchen
• Re: increasing RAM to 128 MB in winCE5.0
  • From: Valter Minute
• Re: increasing RAM to 128 MB in winCE5.0
  • From: lntscm05
• Re: How to a driver for this hardware
  • From: Anthony Pellerin
• ActiveSync can't auto sync problem
  • From: 阿隆西
• Re: Unable to load stream interface driver
  • From: Valter Minute
• Re: Power Management
  • From: Bryan Mok
• Re: Power Management
  • From: K. S. Huang
• Re: Command Processor over Serial
  • From: Alex Malamud
• Command Processor over Serial
  • From: Alex Malamud
• Sound cards for CEPC
  • From: milan
• Re: Recycle Bin
  • From: Anthony Pellerin
• Replace the "hourglass" cursor on the PB5.0
  • From: wincenews
• Re: Registry settings for host driver dll loading
  • From: Anthony Pellerin
• Registry settings for host driver dll loading
  • From: meribha . sherline
• increasing COM port using USB port
  • From: lntscm05
• Tapi not ready yet...
  • From: meribha . sherline
• Recycle Bin
  • From: user
• Re: Power Management
  • From: Bryan Mok
• Re: LAN91C111 on XSC1BD
  • From: Voidcoder
• Re: Unable to load stream interface driver
  • From: Bruce Eitman \(eMVP\)
• Re: Power button
  • From: Bruce Eitman \(eMVP\)
• Re: Viewsonic airPanel BSP?
  • From: Bruce Eitman \(eMVP\)
• Re: Unable to load stream interface driver
  • From: Michel Verhagen (eMVP)
• Re: Power button
  • From: Voidcoder
• Re: Error in Kernel Schedule.c
  • From: Tom Gensel \(eMVP\)
• PDCARD_WINDOW_INFO and PDCARD_WINDOW_STATE how to fill in
  • From: bdr
• Re: Unable to load stream interface driver
  • From: Faiz
• Re: Programming USB in Pocket PC?
  • From: Voidcoder
• Re: How do you make a USB Printer show up as LPT2: every time
  • From: Voidcoder
• Viewsonic airPanel BSP?
  • From: Tomppa
• Re: LAN91C111 on XSC1BD
  • From: Voidcoder
• Re: Forcing Application to RAM without Paging
  • From: Dean Ramsier
• Re: FTP Server for Windows CE 5.0
  • From: Voidcoder
• USB GSM module
  • From: dchung
• USB GSM module
  • From: dchung
• Re: WPA/TKIP support in CE 5.0
  • From: Paul G. Tobey [eMVP]
• Re: LAN91C111 on XSC1BD
  • From: voidcoder
• Re: Forcing Application to RAM without Paging
  • From: Chris Edgington
• Re: Programming USB in Pocket PC?
  • From: Steve Maillet \(eMVP\)
• Re: Unable to load stream interface driver
  • From: Faiz
• Re: FTP Server for Windows CE 5.0
  • From: voidcoder
• Re: Windows 98 and CE 5.0
  • From: Steve Maillet \(eMVP\)
• Re: LAN91C111 on XSC1BD
  • From: Fornazin
• Re: LAN91C111 on XSC1BD
  • From: voidcoder
• Re: LAN91C111 on XSC1BD
  • From: voidcoder
• Re: CE_MODULES_XXXX
  • From: A.User
• Re: LAN91C111 on XSC1BD
  • From: Fornazin
• Re: Headless Wince
  • From: John Spaith [MS]
• Re: Forcing Application to RAM without Paging
  • From: Sue Loh [MS]
• Re: Windows Mobile 5.0 Platform builder?
  • From: Paul G. Tobey [eMVP]
• Re: How could I connect my pocketpc to pc via internet?
  • From: Paul G. Tobey [eMVP]
• Re: LAN91C111 on XSC1BD
  • From: Fornazin
• Re: pcmcia au1100
  • From: prgmr
• UHCI causes boot failure on CEPC
  • From: DoriD
• Re: How to flash Kernel Image ( NK.bin) over JTAG
  • From: Steve Maillet \(eMVP\)
• Re: CE_MODULES_XXXX
  • From: Steve Maillet \(eMVP\)
• Re: how can i access my files present in the target board.
  • From: Remi de Gravelaine
• how can i access my files present in the target board.
  • From: kiran.india@xxxxxxxxx
• Re: pcmcia au1100
  • From: atta
• Re: increasing RAM to 128 MB in winCE5.0
  • From: Valter Minute
• Re: Unable to load stream interface driver
  • From: Valter Minute
• Re: How to flash Kernel Image ( NK.bin) over JTAG
  • From: kartha
• Re: pcmcia au1100
  • From: Ulrich Eckhardt
• Problems setting up IrDA in platform builder
  • From: Harald Fjerdingstad
• Re: pcmcia au1100
  • From: Digital Dream!
• Re: increasing RAM to 128 MB in winCE5.0
  • From: Henrik Viklund
• Re: increasing RAM to 128 MB in winCE5.0
  • From: Anthony Pellerin
• Re: device connectivity problem
  • From: hardworkboy
• Re: Configure USB ENDPoints
  • From: Bølla
• How do you make a USB Printer show up as LPT2: every time
  • From: Ken Hill
• Re: pcmcia au1100
  • From: never . digital
• increasing RAM to 128 MB in winCE5.0
  • From: lntscm05
• Re: device connectivity problem
  • From: Henrik Viklund
• Re: How to flash Kernel Image ( NK.bin) over JTAG
  • From: Anthony Pellerin
• Re: Unable to load stream interface driver
  • From: Henrik Viklund
• Re: Unable to load stream interface driver
  • From: Michel Verhagen (eMVP)
• Re: Power Management
  • From: K. S. Huang
• Re: Power Management
  • From: Bryan Mok
• Re: CE_MODULES_XXXX
  • From: skindiver
• Re: device connectivity problem
  • From: hardworkboy
• Re: CE_MODULES_XXXX
  • From: skindiver
• Re: Can PB5.0 and 4.2 be installed at the same time in a computer??
  • From: Brian
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Steve Maillet \(eMVP\)
• Re: How to improve performace of media play in WinCE (PDA)
  • From: Tom Gensel \(eMVP\)
• HELP - Large SIP keyboard freezes in mid-key press in WinCE 5.02
  • From: cdg
• Re: When will MS fix the WinCE USB Mass Storage Problems?
  • From: Andrew Worsley
• Programming USB in Pocket PC?
  • From: ARINTEL
• Re: Using VS2005 with Platform Builder / CE5.0 ?
  • From: Dean Ramsier
• Re: Connectivity problem with PB 5.0
  • From: Voidcoder
• Re: Using VS2005 with Platform Builder / CE5.0 ?
  • From: DZieger
• Re: Headless Wince
  • From: John
• Re: Connectivity problem with PB 5.0
  • From: Voidcoder
• Re: Connectivity problem with PB 5.0
  • From: Voidcoder
• Re: Problem with USB Mass Storage Devices
  • From: Andrew Worsley
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: ucoklar
• Re: Connectivity problem with PB 5.0
  • From: Voidcoder
• Sr. WinCE platform software development engineer
  • From: George
• Re: Starting Up a CEPC
  • From: ariano.lattanzi
• Re: Boot disk
  • From: Bruce Eitman \(eMVP\)
• Re: Starting Up a CEPC
  • From: Valter Minute
• Starting Up a CEPC
  • From: ariano.lattanzi
• Re: Using VS2005 with Platform Builder / CE5.0 ?
  • From: Paul G. Tobey [eMVP]
• Re: LAN91C111 on XSC1BD
  • From: Fornazin
• Re: Problem with USB Mass Storage Devices
  • From: SergeiR
• Re: Headless Wince
  • From: John Spaith [MS]
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Remi de Gravelaine
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Steve Maillet \(eMVP\)
• Re: Can PB5.0 and 4.2 be installed at the same time in a computer??
  • From: Duncan U. Harper
• Re: Configure USB ENDPoints
  • From: Henrik Viklund
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: ucoklar
• Re: Passthru + Stream Interface
  • From: MSenne
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Steve Maillet \(eMVP\)
• Re: CE_MODULES_XXXX
  • From: Steve Maillet \(eMVP\)
• Re: Kernel can not boot without Kitl
  • From: Dean Ramsier
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Dean Ramsier
• Re: CE_MODULES_XXXX
  • From: Dean Ramsier
• Re: device connectivity problem
  • From: Dean Ramsier
• Re: CE_MODULES_XXXX
  • From: skindiver
• Re: Failed to add my drivers to OS design during migration from 4.2 to
  • From: Anthony Pellerin
• Re: pcmcia au1100
  • From: Ulrich Eckhardt
• Re: Connectivity problem with PB 5.0
  • From: Stefano Magni
• Re: Connectivity problem with PB 5.0
  • From: Stefano Magni
• pcmcia au1100
  • From: Digital Dream!
• Re: EBOOT with Image larger than RAM
  • From: Michael Reim
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Remi de Gravelaine
• Re: Windows Mobile 5.0 Platform builder?
  • From: Henrik Viklund
• Re: "The system cannot find the path specified" in PlatformBuilder Win
  • From: ozby
• Re: Connectivity problem with PB 5.0
  • From: Valter Minute
• Re: When will MS fix the WinCE USB Mass Storage Problems?
  • From: Rob
• Can PB5.0 and 4.2 be installed at the same time in a computer??
  • From: Brian
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: ucoklar
• Re: PB 4.2 missing sections in .PLG file
  • From: Nelson
• Re: Problem with USB Mass Storage Devices
  • From: Gunnar Frenzel
• Re: Platform Manager Connection problem with eVC++
  • From: Ulrich Eckhardt
• Re: PB 5.0 BSP Export Wizard error
  • From: Pretissimo2002
• Re: USBFuncs structure and usb stall error
  • From: Henrik Viklund
• Re: Power Management
  • From: K. S. Huang
• Re: Power Management
  • From: Bryan Mok
• device connectivity problem
  • From: hardworkboy
• Re: Power Management
  • From: K. S. Huang
• Power Management
  • From: Bryan Mok
• Re: CE_MODULES_XXXX
  • From: Steve Maillet \(eMVP\)
• Re: PXA270 WinCE Mouse Cursor is not visible
  • From: K. S. Huang
• Re: CE_MODULES_XXXX
  • From: skindiver
• CE_MODULES_XXXX
  • From: skindiver
• Re: How to embedde diskonchip TFFS to bootloader
  • From: CiticPacific
• Re: cf card reading in eboot
  • From: Andrew Worsley
• Re: clone public btd
  • From: Michel Verhagen (eMVP)
• Re: clone public btd
  • From: Michel Verhagen (eMVP)
• Re: PXA270 WinCE Mouse Cursor is not visible
  • From: Brian
• Re: PXA270 WinCE Mouse Cursor is not visible
  • From: Brian
• Re: PXA270 WinCE Mouse Cursor is not visible
  • From: Brian
• Re: CETK DirectDraw **ABORTED**
  • From: Tom Gensel \(eMVP\)
• Re: CETK DirectDraw **ABORTED**
  • From: pmastroianni
• Re: PB 4.2 missing sections in .PLG file
  • From: Nelson
• Re: PB 4.2 missing sections in .PLG file
  • From: Bruce Eitman \(eMVP\)
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Remi de Gravelaine
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Remi de Gravelaine
• Re: Creating custom shell
  • From: Anthony Pellerin
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: ucoklar
• Re: CETK DirectDraw **ABORTED**
  • From: Tom Gensel \(eMVP\)
• Re: CETK DirectDraw **ABORTED**
  • From: Tom Gensel \(eMVP\)
• Re: CETK DirectDraw **ABORTED**
  • From: Tom Gensel \(eMVP\)
• Re: rebuild cerhost
  • From: Tom Gensel \(eMVP\)
• Re: rebuild cerhost
  • From: skindiver
• CETK DirectDraw **ABORTED**
  • From: pmastroianni
• Re: rebuild cerhost
  • From: skindiver
• Re: rebuild cerhost
  • From: Tom Gensel \(eMVP\)
• Re: PB 4.2 missing sections in .PLG file
  • From: Nelson
• Re: PB 4.2 missing sections in .PLG file
  • From: Nelson
• rebuild cerhost
  • From: skindiver
• Re: EBOOT with Image larger than RAM
  • From: K. S. Huang
• Re: PXA270 WinCE Mouse Cursor is not visible
  • From: K. S. Huang
• Re: "The system cannot find the path specified" in PlatformBuilder
  • From: Bruce Eitman \(eMVP\)
• Re: Boot disk
  • From: Bruce Eitman \(eMVP\)
• Re: PB 4.2 missing sections in .PLG file
  • From: Bruce Eitman \(eMVP\)
• Re: Boot disk
  • From: Parhar
• Re: PXA270 WinCE Mouse Cursor is not visible
  • From: Parhar
• PXA270 WinCE Mouse Cursor is not visible
  • From: Brian
• Platform Manager Connection problem with eVC++
  • From: tony
• PB 4.2 missing sections in .PLG file
  • From: Nelson
• Re: Kernel can not boot without Kitl
  • From: Brian
• Re: kernel boot incorrectly when remove "Enable CE Target Control Support"
  • From: Brian
• Re: Kernel can not boot without Kitl
  • From: Brian
• Re: kernel boot incorrectly when remove "Enable CE Target Control Support"
  • From: Brian
• Re: "The system cannot find the path specified" in PlatformBuilder
  • From: Tom Gensel \(eMVP\)
• Re: Modify project.reg and rebuil all platform
  • From: Voidcoder
• Re: Modify project.reg and rebuil all platform
  • From: Voidcoder
• Re: FTP Server for Windows CE 5.0
  • From: Voidcoder
• Re: FTP Server for Windows CE 5.0
  • From: Voidcoder
• Re: FTP Server for Windows CE 5.0
  • From: Voidcoder
• Re: How to check if my microphone works??
  • From: Voidcoder
• IrDA versus RAW IR?
  • From: dgipling
• Re: FTP Server for Windows CE 5.0
  • From: Voidcoder
• Re: Visual Studio.net Professional
  • From: Paul G. Tobey [eMVP]
• Re: FTP Server for Windows CE 5.0
  • From: Voidcoder
• Re: Problem with USB Mass Storage Devices
  • From: SergeiR
• Re: Missing Start Menu in WM5.0
  • From: Voidcoder
• Re: Problem with USB Mass Storage Devices
  • From: Gunnar Frenzel
• Re: How to check if my microphone works??
  • From: Voidcoder
• Re: Creating custom shell
  • From: gerrit
• Re: Visual Studio.net Professional
  • From: Tweeeek
• Re: IsAPIReady(SH_SHELL) and shell components
  • From: gerrit
• Re: Creating custom shell
  • From: Anthony Pellerin
• Re: Kernel can not boot without Kitl
  • From: Sue Loh [MS]
• Re: off load nk.bin to msystem DOC
  • From: Dean Ramsier
• Re: kernel boot incorrectly when remove "Enable CE Target Control Support"
  • From: Dean Ramsier
• Re: Exception After Enabling Device Interrupts On CEPC
  • From: Dean Ramsier
• Re: EBOOT with Image larger than RAM
  • From: Dean Ramsier
• Re: Modify project.reg and rebuil all platform
  • From: Anthony Pellerin
• Re: Visual Studio.net Professional
  • From: Tweeeek
• Re: FTP Server for Windows CE 5.0
  • From: Stefano Magni
• EBOOT with Image larger than RAM
  • From: Michael Reim
• Re: How to embedde diskonchip TFFS to bootloader
  • From: mobilevil
• Re: FTP Server for Windows CE 5.0
  • From: Stefano Magni
• Re: FTP Server for Windows CE 5.0
  • From: Stefano Magni
• Re: How to check if my microphone works??
  • From: kiran.india@xxxxxxxxx
• Exception After Enabling Device Interrupts On CEPC
  • From: ucoklar
• Re: clone public btd
  • From: skindiver
• Re: "The system cannot find the path specified" in PlatformBuilder
  • From: JGW
• Re: FTP Server for Windows CE 5.0
  • From: Stefano Magni
• Re: Interrupt Handler
  • From: Valter Minute
• Re: off load nk.bin to msystem DOC
  • From: Henrik Viklund
• Re: FTP Server for Windows CE 5.0
  • From: Valter Minute
• How to embedde diskonchip TFFS to bootloader
  • From: CiticPacific
• kernel boot incorrectly when remove "Enable CE Target Control Support"
  • From: Brian
• Kernel can not boot without Kitl
  • From: sunrain
• Re: clone public btd
  • From: Anthony Pellerin
• Re: How to debug bootloader using ARM eXDI driver for Windows CE P
  • From: Yannick Chamming's [eMVP]
• Re: cf card reading in eboot
  • From: mobilevil
• Re: off load nk.bin to msystem DOC
  • From: mobilevil
• Re: How to check if my microphone works??
  • From: kiran.india@xxxxxxxxx
• Re: Platform Builder for Microsoft Windows CE 5.0 (cepb)
  • From: Tom Gensel \(eMVP\)
• Re: Problem with break point
  • From: Sue Loh [MS]
• Re: Pkfuncs.h
  • From: bluesphere
• clone public btd
  • From: skindiver
• Re: LAN91C111 on XSC1BD
  • From: voidcoder
• Re: Problem with break point
  • From: voidcoder
• Re: Rename workspace?
  • From: Tom Gensel \(eMVP\)
• Re: Disable Zero Config in Windows Mobile 5.0
  • From: Kimo Jolin
• Re: Interrupt Handler
  • From: Tom Gensel \(eMVP\)
• Re: Rename workspace?
  • From: Bruce Eitman \(eMVP\)
• Re: How to use HP-Ipaq-H5550 as developper platform ???
  • From: Paul G. Tobey [eMVP]
• Re: How to use HP-Ipaq-H5550 as developper platform ???
  • From: Davidw
• Interrupt Handler
  • From: Keaven Pineau
• Re: How to check if my microphone works??
  • From: voidcoder
• Re: No "Unidentified USB Device" Pop-up
  • From: SergeiR
• Re: Visual Studio.net Professional
  • From: Paul G. Tobey [eMVP]
• Re: Visual Studio.net Professional
  • From: Tweeeek
• Re: Visual Studio.net Professional
  • From: Paul G. Tobey [eMVP]
• Problem with USB Mass Storage Devices
  • From: Gunnar Frenzel
• Visual Studio.net Professional
  • From: Tweeeek
• Rename workspace?
  • From: Tomppa
• Re: IPSM & P30
  • From: Paul G. Tobey [eMVP]
• Problem with break point
  • From: Antoine
• Re: Error in creating image with RAS component added
  • From: Tom Gensel \(eMVP\)
• Re: "The system cannot find the path specified" in PlatformBuilder Win
  • From: Tom Gensel \(eMVP\)
• Re: Pkfuncs.h
  • From: Tom Gensel \(eMVP\)
• Pkfuncs.h
  • From: sanderv
• Re: Forcing Application to RAM without Paging
  • From: Dean Ramsier
• Re: IsAPIReady(SH_SHELL) and shell components
  • From: Dean Ramsier
• Re: IsAPIReady(SH_SHELL) and shell components
  • From: Dean Ramsier
• Re: Disable Zero Config in Windows Mobile 5.0
  • From: Dean Ramsier
• Re: Could you help me ? thanks all !
  • From: Dean Ramsier
• Re: off load nk.bin to msystem DOC
  • From: Dean Ramsier
• Re: cf card reading in eboot
  • From: Dean Ramsier
• Registry error for Windows Media Player
  • From: milan
• Re: insertion of a 32-bit cardbus card get a detection of a 16-bit card
  • From: cflin
• Re: Problem with the remote tools on the Windows CE .NET Default Platform
  • From: Bruce Eitman \(eMVP\)
• Re: How to check if my microphone works?
  • From: Henrik Viklund
• Re: How to check if my microphone works?
  • From: kiran.india@xxxxxxxxx
• Re: Disable Zero Config in Windows Mobile 5.0
  • From: Massimo
• Re: Problem with the remote tools on the Windows CE .NET Default Platform
  • From: Henrik Viklund
• Problem with the remote tools on the Windows CE .NET Default Platform
  • From: Antoine
• Re: How to "Use CodeClip to get the Tux_Custom_Test | TuxCode source"
  • From: hardworkboy
• Re: How to "Use CodeClip to get the Tux_Custom_Test | TuxCode source"
  • From: Erwin
• Re: How to debug bootloader using ARM eXDI driver for Windows CE PB?
  • From: Yannick Chamming's [eMVP]
• Re: Could you help me ? thanks all !
  • From: Yannick Chamming's [eMVP]
• Re: How to check if my microphone works?
  • From: Yannick Chamming's [eMVP]
• cf card reading in eboot
  • From: mobilevil
• off load nk.bin to msystem DOC
  • From: mobilevil
• Re: IPSM & P30
  • From: turnsek
• How to "Use CodeClip to get the Tux_Custom_Test | TuxCode source"
  • From: hardworkboy
• How to check if my microphone works?
  • From: kiran.india@xxxxxxxxx
• Re: How to add resource information (FileVersion, Productversion, etc.) to nk.bin
  • From: Michel Verhagen (eMVP)
• Missing Start Menu in WM5.0
  • From: Knight Lin
• Re: Suppress Wireless Network Available Popup Dialogue?
  • From: Michel Verhagen (eMVP)
• Re: Suppress Wireless Network Available Popup Dialogue?
  • From: Chris Tacke [MVP]
• Suppress Wireless Network Available Popup Dialogue?
  • From: Tomppa
• Re: Disable Zero Config in Windows Mobile 5.0
  • From: Kimo Jolin
• Re: IsAPIReady(SH_SHELL) and shell components
  • From: gerrit
• Re: Afxmessagebox() not working
  • From: Tom Gensel \(eMVP\)
• Re: Wince device in windows network
  • From: Alexander T. Bussmann [MSFT]
• Re: How to use HP-Ipaq-H5550 as developper platform ???
  • From: Davidw
• Re: Missing PCMCIA card insertion event (WinCE5)
  • From: Wei Chen[MS]
• Re: Forcing Application to RAM without Paging
  • From: Chris Edgington
• Re: No "Unidentified USB Device" Pop-up
  • From: Sameer Moidu
• Re: IsAPIReady(SH_SHELL) and shell components
  • From: gerrit
• Re: Forcing Application to RAM without Paging
  • From: Chris Edgington
• Re: Forcing Application to RAM without Paging
  • From: Chris Edgington
• Re: Forcing Application to RAM without Paging
  • From: gerrit
• Re: IsAPIReady(SH_SHELL) and shell components
  • From: Anthony Pellerin
• Re: IsAPIReady(SH_SHELL) and shell components
  • From: gerrit
• Re: Forcing Application to RAM without Paging
  • From: Steve Maillet \(eMVP\)
• IsAPIReady(SH_SHELL) and shell components
  • From: gerrit
• Re: HELP: Debug causes exception but release is fine
  • From: gerrit
• Re: Forcing Application to RAM without Paging
  • From: Chris Edgington
• Re: Bluetooth Virtual com port
  • From: Valter Minute
• Re: How to use HP-Ipaq-H5550 as developper platform ???
  • From: Paul G. Tobey [eMVP]
• How to use HP-Ipaq-H5550 as developper platform ???
  • From: Davidw
• Re: Forcing Application to RAM without Paging
  • From: Steve Maillet \(eMVP\)
• Re: Bluetooth Virtual com port
  • From: Anthony Pellerin
• Bluetooth Virtual com port
  • From: A.User
• My serial ports don't work sometime!
  • From: ms.
• Re: Porting a driver from WinCE 4.2 to 5.0 (CodePalette)
  • From: Edouard Dessioux
• Re: Porting a driver from WinCE 4.2 to 5.0 (CodePalette)
  • From: Anthony Pellerin
• How to check if my microphone works??
  • From: kiran.india@xxxxxxxxx
• Re: Serial Activesync connexion
  • From: Henrik Viklund
• Re: to .exe, .dll, or .lib?
  • From: Anthony Pellerin
• Re: Serial Activesync connexion
  • From: homecdom
• Re: FTP Server for Windows CE 5.0
  • From: Remi de Gravelaine
• Re: FTP Server for Windows CE 5.0
  • From: Valter Minute
• Re: RDP sound playback (WinCE5.0)
  • From: abr
• to .exe, .dll, or .lib?
  • From: hardworkboy
• Re: Changeing SYSINTR_MAXIMUM
  • From: Remi de Gravelaine
• Porting a driver from WinCE 4.2 to 5.0 (CodePalette)
  • From: Edouard Dessioux
• Re: HELP: Debug causes exception but release is fine
  • From: Anthony Pellerin
• Re: Forcing Application to RAM without Paging
  • From: Chris Edgington
• Re: WinCE: Problems including OEM help (.chm) files into Platform SDK
  • From: richardlang
• Re: Forcing Application to RAM without Paging
  • From: Steve Maillet \(eMVP\)
• Forcing Application to RAM without Paging
  • From: Chris Edgington
• Re: WinCE: Problems including OEM help (.chm) files into Platform SDK
  • From: Steve Maillet \(eMVP\)
• Re: WinCE: Problems including OEM help (.chm) files into Platform SDK
  • From: richardlang
• Re: HELP: Debug causes exception but release is fine
  • From: gerrit
• LAN91C111 on XSC1BD
  • From: Fornazin
• Re: RDP sound playback (WinCE5.0)
  • From: SergeiR
• Re: USB Serial not working on WinCE 5.0
  • From: Voidcoder
• Re: Ethernet problem (Realtek) on GEODE
  • From: Voidcoder
• Re: Changeing SYSINTR_MAXIMUM
  • From: Tom Gensel \(eMVP\)
• Re: How to add resource information (FileVersion, Productversion, etc.) to nk.bin
  • From: gerrit
• Re: Ethernet problem (Realtek) on GEODE
  • From: Voidcoder
• Re: Changeing SYSINTR_MAXIMUM
  • From: Dean Ramsier
• Re: Serial Activesync connexion
  • From: Dean Ramsier
• Re: .NET CF installation
  • From: Mhaxx
• Re: Turing for help: Could you give me a loading address of WINCE 3.0?
  • From: Voidcoder
• Re: Ethernet problem (Realtek) on GEODE
  • From: Voidcoder
• Re: IPSM & P30
  • From: Paul G. Tobey [eMVP]
• Re: How to add resource information (FileVersion, Productversion, etc.) to nk.bin
  • From: Gunnar Frenzel
• PB 5.0 BSP Export Wizard error
  • From: Pretissimo2002
• Re: connmgr.exe
  • From: K. S. Huang
• Re: How to add resource information (FileVersion, Productversion, etc.) to nk.bin
  • From: gerrit
• Re: Battery driver get Voltage
  • From: Henrik Viklund
• Re: Turing for help: Could you give me a loading address of WINCE 3.0?
  • From: Bruce Eitman \(eMVP\)
• fixed. thanks everyone
  • From: mobilevil
• Re: Battery driver get Voltage
  • From: Oleg369
• Re: USB Serial not working on WinCE 5.0
  • From: Bruce Eitman \(eMVP\)
• How to add resource information (FileVersion, Productversion, etc.) to nk.bin
  • From: Gunnar Frenzel
• RDP sound playback (WinCE5.0)
  • From: abr
• insertion of a 32-bit cardbus card get a detection of a 16-bit card
  • From: cflin
• Re: Ethernet problem (Realtek) on GEODE
  • From: Roberto
• Re: Serial PCMCIA Card . doesn't work?? HELP
  • From: Anthony Pellerin
• Re: where is the source file of btd.dll and btdrt.dll
  • From: Anthony Pellerin
• USBSerialFn : dwMaxTransferSize only set to dwMaxPacketSize because of WCEUSBSH bug ?
  • From: Ronald Sloot
• Re: PCMCIA reader failure on CE5 CEPC
  • From: Will
• Re: Ethernet problem (Realtek) on GEODE
  • From: Roberto
• Re: the first splash screen
  • From: Olivier Bloch
• Re: Ethernet problem (Realtek) on GEODE
  • From: Roberto
• Serial PCMCIA Card . doesn't work?? HELP
  • From: B.R.Liao
• Re: Serial Activesync connexion
  • From: suji
• Re: on the ce initiation
  • From: hardworkboy
• Re: the first splash screen
  • From: Yannick Chamming's [eMVP]
• Re: KITL error message
  • From: Yannick Chamming's [eMVP]
• Re: Serial Activesync connexion
  • From: Yannick Chamming's [eMVP]
• Re: IPSM & P30
  • From: turnsek
• Re: WinCE: Problems including OEM help (.chm) files into Platform SDK
  • From: Steve Maillet \(eMVP\)
• Re: on the ce initiation
  • From: Parhar
• Re: on the ce initiation
  • From: Parhar
• How to boot form DiskOnChip on Mainstone?
  • From: CiticPacific
• Re: the first splash screen
  • From: hardworkboy
• WinCE: Problems including OEM help (.chm) files into Platform SDK
  • From: richardlang
• Re: on the ce initiation
  • From: hardworkboy
• Re: Soft reset problem
  • From: Voidcoder
• HELP: Debug causes exception but release is fine
  • From: gerrit
• Re: Soft reset problem
  • From: Voidcoder
• NAND FMD with 10 byte ECC
  • From: game
• Re: Serial Activesync connexion
  • From: homecdom
• Re: connmgr.exe
  • From: Adam Dyba [MSFT]
• Re: Disable Zero Config in Windows Mobile 5.0
  • From: Dean Ramsier
• Re: Serial Activesync connexion
  • From: Dean Ramsier
• Re: Missing PCMCIA card insertion event (WinCE5)
  • From: David Liao \(MS\)
• Re: .NET CF installation
  • From: Tom Gensel \(eMVP\)
• Serial Activesync connexion
  • From: homecdom
• Re: Changeing SYSINTR_MAXIMUM
  • From: Tom Gensel \(eMVP\)
• Re: ARM Assembly problems
  • From: Sue Loh [MS]
• Ethernet problem (Realtek) on GEODE
  • From: Roberto
• Re: ARM Assembly problems
  • From: Safiiru no Baka
• Re: .NET CF installation
  • From: Mhaxx
• Re: on the ce initiation
  • From: Bruce Eitman \(eMVP\)
• Re: How to do an IOCTL_NDISUIO_SET_OID_VALUE when WZC controls the
  • From: Massimo
• Re: OAL Functions - PXA270, WinCE 5.0
  • From: SKP
• Re: KITL error message
  • From: Henrik Viklund
• Changeing SYSINTR_MAXIMUM
  • From: Martin
• Re: the first splash screen
  • From: Henrik Viklund
• Re: the first splash screen
  • From: Olivier Bloch
• Re: Battery driver get Voltage
  • From: Henrik Viklund
• Re: the first splash screen
  • From: hardworkboy
• on the ce initiation
  • From: hardworkboy
• Re: Soft reset problem
  • From: OrenR
• Re: the first splash screen
  • From: K. S. Huang
• Win98 boot disk?
  • From: Tomppa
• the first splash screen
  • From: hardworkboy
• Re: Soft reset problem
  • From: voidcoder
• Re: .NET CF installation
  • From: <ctacke/>
• .NET CF installation
  • From: Mhaxx
• Re: Disable Zero Config in Windows Mobile 5.0
  • From: Massimo
• Soft reset problem
  • From: OrenR
• VFPTR missing in debug windows
  • From: ms
• Battery driver get Voltage
  • From: Oleg369
• Re: Where do you find Platform Builder 4.2?
  • From: <ctacke/>
• Re: Missing PCMCIA card insertion event (WinCE5)
  • From: john quick
• Re: Where do you find Platform Builder 4.2?
  • From: Jules . Karim
• Re: ARM Assembly problems
  • From: Tom Gensel \(eMVP\)
• Re: URGENT: Flash File System Trouble.
  • From: Voidcoder
• Re: ARM Assembly problems
  • From: Safiiru no Baka
• Re: ARM Assembly problems
  • From: voidcoder
• ARM Assembly problems
  • From: Safiiru no Baka
• Re: Where do you find Platform Builder 4.2?
  • From: Tom Gensel \(eMVP\)
• Where do you find Platform Builder 4.2?
  • From: jknotts
• Re: URGENT: Flash File System Trouble.
  • From: Steve Maillet \(eMVP\)
• Re: Project listing utility
  • From: Steve Maillet \(eMVP\)
• Re: OAL Functions - PXA270, WinCE 5.0
  • From: Voidcoder
• Re: OAL Functions - PXA270, WinCE 5.0
  • From: Voidcoder
• Re: testing with ARM assembly
  • From: Safiiru no Baka
• Re: testing with ARM assembly
  • From: voidcoder
• Re: URGENT: Flash File System Trouble.
  • From: K. S. Huang
• testing with ARM assembly
  • From: Safiiru no Baka
• Re: Deinstallation VS 2005 Beta causes Platform builder to defunction
  • From: Voidcoder
• Re: Project listing utility
  • From: Remi de Gravelaine
• Re: CheckSentinels means?
  • From: Steve Maillet \(eMVP\)
• Re: Looking for toolhelp.lib for CE .NET 4.2
  • From: Paul G. Tobey [eMVP]
• Re: programmatic suspend/resume
  • From: Paul G. Tobey [eMVP]
• Re: IPSM & P30
  • From: Paul G. Tobey [eMVP]
• CheckSentinels means?
  • From: ydlu
• Re: Project listing utility
  • From: Steve Maillet \(eMVP\)
• Re: Deinstallation VS 2005 Beta causes Platform builder to defunction
  • From: Steve Maillet \(eMVP\)
• Re: programmatic suspend/resume
  • From: paul . heil
• Re: USB Keyboard porblem
  • From: Charles Wang
• Re: eboot.nb0 generation
  • From: Bruce Eitman \(eMVP\)
• Re: URGENT: Flash File System Trouble.
  • From: gd.shukla
• Re: URGENT: Flash File System Trouble.
  • From: Anthony Pellerin
• Re: OAL Functions - PXA270, WinCE 5.0
  • From: Valter Minute
• Looking for toolhelp.lib for CE .NET 4.2
  • From: terry007
• Deinstallation VS 2005 Beta causes Platform builder to defunction
  • From: Erwin
• Re: CEPC Hard disk problem
  • From: R. de Vreede
• Re: which QFE's should i install?
  • From: ahmet
• Re: programmatic suspend/resume
  • From: Steve Maillet \(eMVP\)
• Re: VOIP using wireless LAN
  • From: Bryan Mok
• Re: DllMain error
  • From: Voidcoder
• Re: Smart card driver protocol negotiation
  • From: Igor Dvorkin [MS]
• Re: eboot.nb0 generation
  • From: Tobias
• Re: building an OS Image
  • From: "Chigusa Sansen [MS]"
• Re: USB Keyboard porblem
  • From: Charles Wang
• Re: USB Keyboard porblem
  • From: Dean Ramsier
• Re: eboot.nb0 generation
  • From: Bruce Eitman \(eMVP\)
• Re: programmatic suspend/resume
  • From: Paul G. Tobey [eMVP]
• programmatic suspend/resume
  • From: paul . heil
• Re: USB Keyboard porblem
  • From: Charles Wang
• Re: Soundcard?
  • From: Voidcoder
• Windows CE File System Performance
  • From: David Kotkin
• Re: USB Keyboard porblem
  • From: Charles Wang
• Re: eboot.nb0 generation
  • From: Tobias
• Re: Cant find .lib files in custom SDK
  • From: Voidcoder
• Re: Cant find .lib files in custom SDK
  • From: Voidcoder
• Re: Missing PCMCIA card insertion event (WinCE5)
  • From: Wei Chen[MS]
• Re: Accessing CIS without the CardGetFirstTuple, CardGetTupleData, Car
  • From: David Liao \(MS\)
• Re: Cant find .lib files in custom SDK
  • From: Voidcoder
• Re: which QFE's should i install?
  • From: Jalen He [MS]
• Re: Support RTTI
  • From: Gpeica
• Re: eboot.nb0 generation
  • From: Tobias
• Re: Problem with FILESYS_FSROMRAM
  • From: Michael Reim
• Re: VOIP using wireless LAN
  • From: Paul G. Tobey [eMVP]
• Re: CE databases and registry hives on transaction safe file systems
  • From: Sue Loh [MS]
• Re: IPSM & P30
  • From: Paul G. Tobey [eMVP]
• Re: eboot.nb0 generation
  • From: Bruce Eitman \(eMVP\)
• Re: Environment variable SYSGEN not defined
  • From: Norman Rericha
• Re: DllMain error
  • From: ms
• Re: eboot.nb0 generation
  • From: Tobias
• Re: Soundcard?
  • From: ariano.lattanzi
• Re: connmgr.exe
  • From: K. S. Huang
• Re: Cant find .lib files in custom SDK
  • From: ahmet
• Re: Cant find .lib files in custom SDK
  • From: ahmet
• CE4.20, changing SNTP refresh timeout
  • From: Magnux
• Environment variable SYSGEN not defined
  • From: GB
• Re: Cant find .lib files in custom SDK
  • From: ahmet
• Re: CEPC Hard disk problem
  • From: Remi de Gravelaine
• Cant find .lib files in custom SDK
  • From: ahmet
• Re: CEPC Hard disk problem
  • From: ucm
• Re: EVC3 2002 edition
  • From: Mauro de Gennaro
• Re: Repeated spurious "3" key, when USB keyboard is connected
  • From: Panino
• Environment variable SYSGEN not defined
  • From: GB
• Re: CE databases and registry hives on transaction safe file systems
  • From: Anton Jarl
• Re: CE databases and registry hives on transaction safe file systems
  • From: Anton Jarl
• Re: Boot disk problems
  • From: Yannick Chamming's [eMVP]
• Boot disk problems
  • From: Tomppa
• Re: Anyone from MS care about this?
  • From: John Eldridge [MSFT]
• Re: CE databases and registry hives on transaction safe file systems
  • From: <ctacke/>
• Re: VOIP using wireless LAN
  • From: Bryan Mok
• Re: connmgr.exe
  • From: Adam Dyba [MSFT]
• Re: MSDN-2540
  • From: Steve Maillet \(eMVP\)
• Re: PCMCIA reader failure on CE5 CEPC
  • From: Jules . Karim
• Re: CMOS Camera Modules and PXA270
  • From: Jules . Karim
• Re: CE databases and registry hives on transaction safe file systems
  • From: Jules . Karim
• Re: eboot.nb0 generation
  • From: Bruce Eitman \(eMVP\)
• CE databases and registry hives on transaction safe file systems
  • From: Anton Jarl
• Re: USB Keyboard porblem
  • From: Charles Wang
• CMOS Camera Modules and PXA270
  • From: bluesphere
• Re: Soundcard?
  • From: voidcoder
• Re: eboot.nb0 generation
  • From: Tobias
• Anyone from MS care about this?
  • From: Andrew Worsley
• Re: eboot.nb0 generation
  • From: Bruce Eitman \(eMVP\)
• Re: eboot.nb0 generation
  • From: Tobias
• Re: USB Keyboard porblem
  • From: Charles Wang
• Re: eboot.nb0 generation
  • From: Dean Ramsier
• Re: which QFE's should i install?
  • From: Voidcoder
• Re: USB Keyboard porblem
  • From: Charles Wang
• Re: eboot.nb0 generation
  • From: Tobias
• Re: eboot.nb0 generation
  • From: Anthony Pellerin
• Re: EVC3 2002 edition
  • From: Anthony Pellerin
• eboot.nb0 generation
  • From: Tobias
• Re: EVC3 2002 edition
  • From: Anthony Pellerin
• Re: Repeated spurious "3" key, when USB keyboard is connected
  • From: Dean Ramsier
• Re: USNFN serial
  • From: Michael S. Schaffner, P.E.
• Re: VOIP using wireless LAN
  • From: Paul G. Tobey [eMVP]
• Re: How can I create eboot from command prompt?
  • From: Bruce Eitman \(eMVP\)
• Re: which QFE's should i install?
  • From: Voidcoder
• Re: [TFAT] 2 FAT on the same block
  • From: Anthony Pellerin
• Re: Passthru + Stream Interface
  • From: gralp
• Soundcard?
  • From: ariano.lattanzi
• Re: Repeated spurious "3" key, when USB keyboard is connected
  • From: Panino
• Re: USB Keybaord Registry setting.
  • From: Charles Wang
• PCMCIA reader failure on CE5 CEPC
  • From: Will
• Re: MSDN-2540
  • From: Pretissimo2002
• Re: Smart card driver protocol negotiation
  • From: Piet
• Re: Increasing physical memory in WinCE
  • From: Sue Loh [MS]
• Re: How can I add registry entries containing square brackets?
  • From: Sue Loh [MS]
• [TFAT] 2 FAT on the same block
  • From: Anthony Pellerin
• USNFN serial
  • From: Bolla
• Re: Increasing physical memory in WinCE
  • From: Dean Ramsier
• Re: Problem with FILESYS_FSROMRAM
  • From: Dean Ramsier
• Re: which QFE's should i install?
  • From: Dean Ramsier
• Re: using GPIOs
  • From: bluesphere
• EVC3 2002 edition
  • From: Mauro de Gennaro
• Re: Passthru + Stream Interface
  • From: knopper
• Re: WPAPSK problem: OID_802_11_ADD_KEY not called
  • From: Remi de Gravelaine
• Re: connmgr.exe
  • From: Massimo
• Re: Write image file to NOR FLASH
  • From: mobilevil
• Re: CEPC Tutorial
  • From: Gpeica
• Re: CEPC Tutorial
  • From: Gpeica
• Re: which QFE's should i install?
  • From: ahmet
• Re: Write image file to NOR FLASH
  • From: Anthony Pellerin
• where to locate ..genericdeviceiocontrolcall.cpp..
  • From: kiran.india@xxxxxxxxx
• Re: connmgr.exe
  • From: Adam Dyba [MSFT]
• which QFE's should i install?
  • From: ahmet
• Re: Problem with FILESYS_FSROMRAM
  • From: Michael Reim
• Re: WPAPSK problem: OID_802_11_ADD_KEY not called
  • From: "Soemin Tjong [MSFT]"
• Re: Write image file to NOR FLASH
  • From: tam
• Re: Write image file to NOR FLASH
  • From: Yannick Chamming's [eMVP]
• Re: Audio and Video support onboard...
  • From: Yannick Chamming's [eMVP]
• Re: registry size for persistance storage
  • From: Yannick Chamming's [eMVP]
• registry size for persistance storage
  • From: skindiver
• Audio and Video support onboard...
  • From: kiran.india@xxxxxxxxx
• Re: Increasing physical memory in WinCE
  • From: Sathish
• Re: VOIP using wireless LAN
  • From: Bryan Mok
• Write image file to NOR FLASH
  • From: tam
• Re: Network bridging and Internet Connection sharing
  • From: voidcoder
• Re: License Practices Question about replacing OEM Install
  • From: Steve Maillet \(eMVP\)
• Re: License Practices Question about replacing OEM Install
  • From: Paul G. Tobey [eMVP]
• Re: License Practices Question about replacing OEM Install
  • From: Hans Zassenhaus
• M2M questions
  • From: ndc72

• Windows
• Science
• Usenet

• Archive
• About
• Privacy
• Search
• Imprint

www.tech-archive.net  > Archive  > WindowsCE  > microsoft.public.windowsce.platbuilder  > 2006-02