Re: Display problem! cant set 16bpp...

Yes it supports networking and i think activesync too( I can see pc
connection prop. from control panel.) I can use USB mass storage devices
either...
But none of that files exists.(I can view hidden/sys... files)


"Voidcoder" <voidcoder@xxxxxxxxx>, haber iletisinde sunlari
yazdi:e0h7e%23mIGHA.3000@xxxxxxxxxxxxxxxxxxxxxxx
> Does the prebult image support networking? serial ports?
> usb rndis? usb serial? ActiveSync connetion? any interface that
> can be used to remotely access the device?
>
> Also have a look for the following files on device
> when running their image:
>
> \WINDOWS\tcpipc.dll
> \WINDOWS\cemgrc.exe
> \WINDOWS\cetlstub.dll
>
> Do you have something like this in \windows directory?
>
> "CAGRI" <arge5@xxxxxxxxxxxx> wrote in message
> news:OxpO3qmIGHA.3144@xxxxxxxxxxxxxxxxxxxxxxx
>>I m running the nk.bin files from bios loader. I mean i am sysgen ing the
>>image os and then i am copying nk.bin file to DiskOnModule and Start the
>>device.
>> Do you think that i have still a way to dump registry while opening image
>> in this way and connect with plat.builder or with any remote tool after
>> winCE started? It would be very nice.
>> Do you know a registry editor s/w that runs on winCE?
>> And you may be right about memory configuration cause i have changed smt.
>> on config.bib and oeminit.asm. Can you explain the memory configuration
>> effect on display?
>> Thanks...
>>
>>
>> "Voidcoder" <voidcoder@xxxxxxxxx>, haber iletisinde sunlari
>> yazdi:%23oaYIzlIGHA.2668@xxxxxxxxxxxxxxxxxxxxxxx
>>> Hm, I'm very confused now :) If you can't download
>>> your own image, how do you see VGA problems
>>> on your own builds?
>>>
>>> What I mean is to dump registry when !their! precompiled
>>> image is running, not yours. I'm sure it should be a way to
>>> setup a Platman connection to device via ethernet, serial,
>>> rndis, ActiveSync or whatever.
>>>
>>> Once you get the copy of registry from their build, you could
>>> try to compare registry settings for display driver. In case the
>>> driver binaries are identical (it is possible that the driver
>>> binary in the precopiled image is different form one you have
>>> in your current BSP), it is possible that some external settings
>>> affect the driver's behaviour. Probably registry settings, or may
>>> be different memory configuration in your config.bib.
>>>
>>>
>>>
>>> "CAGRI" <arge5@xxxxxxxxxxxx> wrote in message
>>> news:%233KUealIGHA.3984@xxxxxxxxxxxxxxxxxxxxxxx
>>>> Unfortunately I couldnt achieve to download image from PlatBuilder and
>>>> i have tried someone from icop support but he is not writing with me he
>>>> is just referancing to some sheets of Step by Step guide that i have
>>>> read 50 times.
>>>> Thanks anyway any other idea? Do you think it should definetly be
>>>> solved by registery? Whant does it mean to you its telling same
>>>> "VGAMode: X:800, Y:600 ,Bpp:16, Refresh Rate:60"
>>>> debug message but not correct bpp?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> "Voidcoder" <voidcoder@xxxxxxxxx>, haber iletisinde sunlari
>>>> yazdi:ezHLbGlIGHA.2628@xxxxxxxxxxxxxxxxxxxxxxx
>>>>> Is there any way to setup a "Platform Manager Connection"
>>>>> with the target when running on the prebuilt image?
>>>>> Are you able to get eVC++ or Remote Tools connected
>>>>> to the target? In that case just go to Tools menu in PB or
>>>>> eVC and run Remote Registry Editor. Connect the tool
>>>>> to device and export the registry to PC.
>>>>>
>>>>> Otherwise (no way to run Remote Tools), you are about
>>>>> to run your own app to enum registry entries, or try
>>>>> to find a third-party registry editor for CE.
>>>>>
>>>>> Have you tried to contact ICOP support?
>>>>>
>>>>> "CAGRI" <arge5@xxxxxxxxxxxx> wrote in message
>>>>> news:Oqey55kIGHA.2212@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>> Hi,
>>>>>> Thanks for answer. In fact i dont know hot to dump registry. Could
>>>>>> you please explain?
>>>>>>
>>>>>> "Voidcoder" <voidcoder@xxxxxxxxx>, haber iletisinde sunlari
>>>>>> yazdi:eVDmC2kIGHA.668@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>>> Try to dump registry on prebuilt image and
>>>>>>> compare vs. your platform.reg (or better reinit.ini).
>>>>>>> See if there are some differences for the
>>>>>>> AFD, PPP and display drivers.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> "CAGRI" <arge5@xxxxxxxxxxxx> wrote in message
>>>>>>> news:OliUlfkIGHA.216@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>>>> Hi,
>>>>>>>> I got ICOP Vortex86 6071 board and winCE 5.0 plat builder and using
>>>>>>>> AUO 12.1 inch (800x600 tft lcd) panel.
>>>>>>>> When i m using the pre-built image that i downloaded from icop's
>>>>>>>> web site, the display is very well. I m following serial debug
>>>>>>>> outbut from hyperterminal and it says:
>>>>>>>> "
>>>>>>>> VGAMode: ModeID:47, ModeIndex:1, RateIndex=2
>>>>>>>> VGAMode: X:800, Y:600 ,Bpp:16, Refresh Rate:60
>>>>>>>> "
>>>>>>>>
>>>>>>>> So I have built the image as following instructions in Step by Step
>>>>>>>> or Starter Guide like manuals by writing propriate registery
>>>>>>>> entries for 800x600x16 VSync:60Hz.When i load the image(by
>>>>>>>> biosloader) the debug output :
>>>>>>>>
>>>>>>>> "
>>>>>>>> SysInit: Mapping Extra RAM from 0x84000000 to 0x87000000
>>>>>>>> GDTBase=817b50e8 IDTBase=817d6860 KData=817dd800
>>>>>>>> Windows CE Kernel for i486 Built on Jun 24 2004 at 18:23:42
>>>>>>>> g_pPageDir = 817e0000 X86Init done, OEMAddressTable = 817e1000.
>>>>>>>> DeviceFolder::LoadDevice!Enumerate Found deprecated load
>>>>>>>> instructions at (Driver
>>>>>>>> s\BuiltIn\AFD). Driver cannot be unloaded.
>>>>>>>> DeviceFolder::LoadDevice!Enumerate Found deprecated load
>>>>>>>> instructions at (Drivers\BuiltIn\PPP). Driver cannot be unloaded.
>>>>>>>> CalibrateStallCounter: delay is 62
>>>>>>>> Get Mode info from /L Args->VideoMode=0!! cx=800, cy=600!!
>>>>>>>> VGAMode:
>>>>>>>> ModeID:47,
>>>>>>>> ModeIndex:1, RateIndex=2
>>>>>>>> VGAMode: X:800, Y:600 ,Bpp:16, Refresh
>>>>>>>> Rate:60
>>>>>>>> SYSAGP:Reserved memory use registry
>>>>>>>> setting!!
>>>>>>>> Address:80220000 Size:00300000
>>>>>>>> Lyg.p: Layout Manager
>>>>>>>> successfully initialized to 1
>>>>>>>> Explorer(V2.0) taskbar thread started.
>>>>>>>> NDISPWR:: Found adapter [PCI\RTL81391]
>>>>>>>> "
>>>>>>>> I can see:
>>>>>>>> VGAMode: X:800, Y:600 ,Bpp:16, Refresh Rate:60
>>>>>>>> in my image too. Although the resolution seems ok on screen, the
>>>>>>>> color depth is not! It seems like 8bpp instead of 16bpp.
>>>>>>>> I also couldnt figure out "Driver cannot be unloaded" messages.
>>>>>>>> What could be the display's ploblem and what it means that
>>>>>>>> messages?
>>>>>>>> Any comment would be nice,
>>>>>>>> Thanks in advance...
>>>>>>>> -CAGRI-
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


.