Re: Coredll patch Windows CE 4.21

Hello. Thanks for the answer.

We are a research group with a certain experience in CSPs with x86
architectures (Windows 2000/XP), but we are beginners in the same subject
with pocket PC's devices.

I'd want to make you some questions.

The way you say to do the tests of our CSP in a Pocket PC device is using
the platform builder and activating the flag "Enable Kernel Debugger" isn't
it?. But I don't know what I must to do. Do I must to do a new Windows CE
Platform using an ARM BSP from selection (for example the ARM Integrator
ARMV4I), build the image with the flag "Enabling Kernel Debugging" activated
and download the image built using the '4.20 Emulator' as device (this
option appears in the 'Configure Remote Connection' option)?. Or what I must
to do?

Thanks and sorry if what I'm asking doesn't have much sense, but I repeat we
are beggining in the Platform Builder World.

Regards,
Antonio.



"Ganapathy Raman (MS)" <graman@xxxxxxxxxxxxxxxxxxxx> escribió en el mensaje
news:elSqP2uGGHA.1028@xxxxxxxxxxxxxxxxxxxxxxx
> You dont need the patch on CE 4.2. Signature checking of the CSP is
> disabled when the kernel debugger is attached. So you can debug your
> unsigned CSP using platform builder.
>
> --
> Ganapathy Raman
> Program Manager, Windows Mobile/CE Security
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Antonio Andres" <aae1@xxxxxxxxx> wrote in message
> news:ZqOyf.43740$kp.416715@xxxxxxxxxxxxxxxxxxxxxxx
>> Hello. First of all thanks for the answer.
>>
>> Well, I'll try to show exactly what I want to do.
>>
>> The scenario is as follows:
>> - I have the platform Builder v4.2
>> - I ave a Pocket PC with Windows Mobile 2003
>> - I have a CSP developed for Windows XP which allow to use a concrete
>> type of smartcards
>>
>> Now, I want to transfer the actual implementation of the CSP to be used
>> in a Pocket PC device. The problem is that Microsoft don't allow to use a
>> new CSP in a device if this is not signed by they, and I need to do some
>> tests to debug my CSP before it gets sent to Microsoft for signing. The
>> coredll patched (which I commented in my post) allows to do tests with a
>> not signed CSP. I have an older version of this coredll patched, the
>> v2.11, provided by Microsoft.
>>
>> Now the questions:
>> 1) Is there any way to do tests with a not signed CSP in my device before
>> it gets sent to Microsoft for signing?
>> 2) Could I use the platform builder to do these tests?. If the answer is
>> YES, what I must to do?
>>
>> Thanks in advance,
>> Antonio.
>>
>>
>> "John Spaith [MS]" <jspaith@xxxxxxxxxxxxxxxxxxxx> escribió en el mensaje
>> news:%23nkZyyHGGHA.1552@xxxxxxxxxxxxxxxxxxxxxxx
>>> If you have contacts within Microsoft (in particular some sort of
>>> Technical
>>> Account Manager or whoever you're working with to get your software
>>> signed
>>> or general product support?) you may have better luck. I'm not familiar
>>> with the patch, but if such a thing is available I would hope it'd be
>>> more
>>> readily had from a QFE site in MS somewhere.
>>>
>>> Most people on this group develop to Platform Builder so they'll have CE
>>> 4.2
>>> and CE 5.0 bits, but not the exact coredll on the PPC 2003.
>>>
>>> --
>>> John Spaith
>>> Software Design Engineer, Windows CE
>>> Microsoft Corporation
>>>
>>> Check out the new CE Networking Team Blog at
>>> http://blogs.msdn.com/cenet/.
>>>
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights.
>>> You assume all risk for your use. © 2003 Microsoft Corporation. All
>>> rights
>>> reserved.
>>>
>>> "Antonio Andres" <aae1@xxxxxxxxx> wrote in message
>>> news:g%wxf.4932$kp.120671@xxxxxxxxxxxxxxxxxxxxxxx
>>>> Hi everybody.
>>>>
>>>> Please, could someone pass me the patch for the coredll.dll in
>>>> windows ce v4.21 (Windows Mobile 2003 second edition) for a ARM
>>>> archuitecture?
>>>>
>>>> I need to do some tests with a CSP that I've developed before it gets
>>>> sent
>>>> to Microsoft for signing.
>>>>
>>>> Thanks in advance,
>>>> Antonio
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: Coredll patch Windows CE 4.21
    ... you first create a Windows CE project based on the ARM emulator. ... Debugging a CSP is similar to debugging ... windows ce images/apps using platform builder and arm emulator. ... > the platform builder and activating the flag "Enable Kernel Debugger" ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Should we sign DLLs used by a CSP.
    ... dlls that you use. ... wouldn't be able to just write a strong crypto CSP and add it to Windows. ... API provided via one of the CPAcquireContextparameters. ...
    (microsoft.public.platformsdk.security)
  • Re: RSA/DSA crypto service provider - what component needed
    ... PRB: Err Msg: CSP for This Implementation Could Not Be Acquired ... MS Exchange Hosting: http://www.intermedia.net/exchangehosting Windows 2000 Web Hosting: http://www.intermedia.net/webhosting For a waiver of the set up fee use "IMFREE" code ... > Im trying to use .Net RSA/DSACryptoServiceProvider classes and during> object creation I got exception from: mscorlib "CryptoAPI cryptographic service provider for this implementation could not be acquired". ... > Are that components dependent of national versions of Windows or region? ...
    (microsoft.public.dotnet.framework.aspnet.security)
  • Re: CSP DLL Signed by Microsoft: Signature not recognised by Certificate Services
    ... To check if your CSP is registered correctly, ... Services running on Windows Server 2003 do not recognise the signature. ... Windows 2003 Server, as the registry steps we took ...
    (microsoft.public.platformsdk.security)
  • Re: CSP DLL...
    ... for using unsigned CSPs. ... kernel debugger to the system to use an unsigned CSP. ... Best Practices for implementing Windows Server 2003 PKI: ... Windows Server 2003 web enrollment and troubleshooting guide: ...
    (microsoft.public.platformsdk.security)