Re: WinCEPC Help: Setting static IP address for nk.bin image
- From: "Henrik Viklund" <henrik.viklund@xxxxxxxxx>
- Date: 12 Jan 2006 03:47:38 -0800
What are you trying to do? Are you trying to set up a KITL debug
connection so you can debug your device, or are you trying to add
network support for the image.
The reason I ask is because if you only have one ethernet port on your
device, you need to choose between the two. A KITL transport use a
special driver linked into the kernel. This does not in it self add
network support to the OS image, rather it is used by the kernel to
communicate with platform Builder. Adding another "user space" driver
on top of that that uses the same hardware resources is a bad thing.
Instead, you could use the "asyncmac" driver that use KTIL to tunnel
the network traffic to and from the host.
Another thing that might be part of the problem is if you use a
firewall or not, and how it is setup.
Henrik Viklund
.
- Follow-Ups:
- Re: WinCEPC Help: Setting static IP address for nk.bin image
- From: Henrik Viklund
- Re: WinCEPC Help: Setting static IP address for nk.bin image
- References:
- Prev by Date: Re: BSP port
- Next by Date: Re: WinCEPC Help: Setting static IP address for nk.bin image
- Previous by thread: Re: WinCEPC Help: Setting static IP address for nk.bin image
- Next by thread: Re: WinCEPC Help: Setting static IP address for nk.bin image
- Index(es):
Relevant Pages
|
