Re: pcmcia card in wince 5.0 problem

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Remi,

Thanks. I82365 was added because TIPCCARD only did not work, also the
TIPCCARD registered (in registry)

PID:83f98d7a TID:83fa1caa 0x83fca800: >>> Loading module
pcc_tipccard.dll at address 0x02510000-0x02523000 (RW data at
0x01EB5000-0x01EB577C)
Loaded symbols for
'C:\WINCE500\PBWORKSPACES\TICEPC\RELDIR\CEPC_X86_DEBUG\PCC_TIPCCARD.DLL'
PID:83f98d7a TID:83fa1caa 0x83fca800: PCMCIA!DeviceConfig+(2)
PID:83f98d7a TID:83fa1caa 0x83fca800: <<< Unloading module
pcc_tipccard.dll at address 0x02510000-0x02523000 (RW data at
0x01EB5000-0x01EB577C)
Unloaded symbols for
'C:\WINCE500\PBWORKSPACES\TICEPC\RELDIR\CEPC_X86_DEBUG\PCC_TIPCCARD.DLL'
PID:83f98d7a TID:83fa1caa 0x83fca800: >>> Loading module
pcc_tipccard.dll at address 0x02510000-0x02523000 (RW data at
0x01EB5000-0x01EB577C)
Loaded symbols for
'C:\WINCE500\PBWORKSPACES\TICEPC\RELDIR\CEPC_X86_DEBUG\PCC_TIPCCARD.DLL'
PID:83f98d7a TID:83fa1caa 0x83fca800: PCMCIA!DeviceConfig+(3)
PID:83f98d7a TID:83fa1caa 0x83fca800: <<< Unloading module
pcc_tipccard.dll at address 0x02510000-0x02523000 (RW data at
0x01EB5000-0x01EB577C)
Unloaded symbols for
'C:\WINCE500\PBWORKSPACES\TICEPC\RELDIR\CEPC_X86_DEBUG\PCC_TIPCCARD.DLL'
PID:83f98d7a TID:83fa1caa 0x83fca800: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\PCC_TIPCCARD1\Prefix)
returned 2
PID:83f98d7a TID:83fa1caa 0x83fca800: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\PCC_TIPCCARD1\BusPrefix)
returned 2
PID:83f98d7a TID:83fa1caa 0x83fca800: >>> Loading module
pcc_tipccard.dll at address 0x02510000-0x02523000 (RW data at
0x01EB5000-0x01EB577C)
Loaded symbols for
'C:\WINCE500\PBWORKSPACES\TICEPC\RELDIR\CEPC_X86_DEBUG\PCC_TIPCCARD.DLL'
PID:83f98d7a TID:83fa1caa 0x83fca800: Updated eptr->e32_vsize to =
00002000
PID:83f98d7a TID:83fa1caa 0x83fca800: >>> Loading module giisr.dll at
address 0x802F6000-0x802F8000 (RW data at 0x81DB6000-0x81DB6504)
Loaded symbols for
'C:\WINCE500\PBWORKSPACES\TICEPC\RELDIR\CEPC_X86_DEBUG\GIISR.DLL'

As suggested by David Liao, I change NoConfig in platform.reg before
build as:

[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA]
"Dll"="pcmcia.dll"
"NoConfig"=dword:0
"IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA
Card Services"

After pcmcia card inserted, the CEPC hang without any debug trace seen
(all pccard related debug zones, starting with "pc" were checked)
except the following:

PID:83f98d7a TID:3e8a0d2 0x83e9d938: CardBus: Socket 0 IST
(SockEvent=6,SocketMask=f,ExCA 0=84, 1=c 2=0,3=10,5=0)
PID:83f98d7a TID:3e8a0d2 0x83e9d938: CardBus: Socket 0 IST
(SockEvent=6,SocketMask=f,ExCA 0=84, 1=c 2=0,3=10,5=0)
PID:83f98d7a TID:3e8a0d2 0x83e9d938: CardBus: Socket 0 IST
(SockEvent=6,SocketMask=f,ExCA 0=84, 1=c 2=0,3=10,5=0)
PID:83f98d7a TID:3e8a0d2 0x83e9d938: CardBus: Socket 0 IST
(SockEvent=6,SocketMask=f,ExCA 0=84, 1=c 2=0,3=10,5=0)
PID:83f98d7a TID:3e8a0d2 0x83e9d938: CardBus: Socket 0 IST
(SockEvent=6,SocketMask=f,ExCA 0=84, 1=c 2=0,3=10,5=0)
PID:83f98d7a TID:3e8a0d2 0x83e9d938: CardBus: Socket 0 IST
(SockEvent=6,SocketMask=f,ExCA 0=84, 1=c 2=0,3=10,5=0)

The above was cought without 82365 enabled.

David:

How where could I check and modify the settings as you suggested?

I was mis led by the CE5.0 as the interlock beteween i82365 and TI card
drivers was removed in CE5.0.

By the way, is there a way in removing items from "OSDesignView" in
CE5.0? I used to do it easily in CE4.2 by simply right-click and
delete.

Regards

the other David

.

Relevant Pages

  • SD/MMC loading on Lubbock based board
    ... Today I got running almost all controllers (Ethernet, Display, ... the MMC card. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: PCMCIA / ATADISK problem
    ... It may be cause by ATADISK running at 16-bit mode and socket is power on as ... > card, the target system freezes as long the card is attached. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Hive Registry and TIPC card problem
    ... The CF mimics the TIPCCARD driver. ... 4294770147 0x83fcd8e4: ATAPI DLL_PROCESS_ATTACH ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Cisco Aironet 350 & CE.NET 4.2
    ... The card works like a charm when using Windows CE 4.1, ... hardware is okay. ... Windows CE Consultant ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Debug img hanging
    ... Ok, if the kernel and bootloader share the same sources, then I agree ... The Kernel Debugger is waiting to connect with target. ...
    (microsoft.public.windowsce.platbuilder)