microsoft.public.windowsce.platbuilder

• Date Index

---

• Re: License Practices Question about replacing OEM Install, Paul G. Tobey [eMVP]
• Re: Debugging HTTPD, voidcoder
• How can I add registry entries containing square brackets?, Panino
  • Re: How can I add registry entries containing square brackets?, Sue Loh [MS]
  • Re: How can I add registry entries containing square brackets?, voidcoder
• Network bridging and Internet Connection sharing, Mohin
• connmgr.exe, Massimo
• How can I create eboot from command prompt?, GB
  • Re: How can I create eboot from command prompt?, GB
    • Re: How can I create eboot from command prompt?, Dean Ramsier
    • Re: How can I create eboot from command prompt?, Duncan U. Harper
• multithreaded debugging, Mauro de Gennaro
  • Re: multithreaded debugging, Mauro de Gennaro
    • Re: multithreaded debugging, Valter Minute
    • Re: multithreaded debugging, SergeiR
  • Re: multithreaded debugging, Voidcoder
    • Re: multithreaded debugging, Mauro de Gennaro
      • Re: multithreaded debugging, Valter Minute
      • Re: multithreaded debugging, Mauro de Gennaro
      • Re: multithreaded debugging, <ctacke/>
      • Re: multithreaded debugging, Mauro de Gennaro
      • Re: multithreaded debugging, Dean Ramsier
      • Re: multithreaded debugging, Mauro de Gennaro
      • Re: multithreaded debugging, Voidcoder
      • Re: multithreaded debugging, Mauro de Gennaro
      • Re: multithreaded debugging, Voidcoder
• GUI Application..., kiran.india@xxxxxxxxx
  • Re: GUI Application..., Steve Maillet \(eMVP\)
    • Re: GUI Application..., kiran.india@xxxxxxxxx
      • Re: GUI Application..., Erwin
• Bug in PS2 keyboard driver?, Andrew Worsley
  • Re: Bug in PS2 keyboard driver?, Andrew Worsley
• Re: USB Keybaord Registry setting., Dean Ramsier
  • Message not available
    • Re: USB Keybaord Registry setting., Michael S. Schaffner, P.E.
  • Message not available
    • Re: USB Keybaord Registry setting., Dean Ramsier
• NDIS loads drivers with LoadLibrary, is this correct?, brad . beveridge
  • Re: NDIS loads drivers with LoadLibrary, is this correct?, Chris Edgington
    • Re: NDIS loads drivers with LoadLibrary, is this correct?, brad . beveridge
• Simultaneously access to file-system from USB-host and WinCE-device, Martin
  • Re: Simultaneously access to file-system from USB-host and WinCE-device, Dean Ramsier
  • Re: Simultaneously access to file-system from USB-host and WinCE-device, voidcoder
• Repeated spurious "3" key, when USB keyboard is connected, Panino
  • Re: Repeated spurious "3" key, when USB keyboard is connected, Panino
    • Re: Repeated spurious "3" key, when USB keyboard is connected, Yannick Chamming's [eMVP]
• Equivalent file for "conio.h" in WinCE, Sameer
  • Re: Equivalent file for "conio.h" in WinCE, Paul G. Tobey [eMVP]
• Increasing physical memory in WinCE, sbegumpeta
  • Re: Increasing physical memory in WinCE, Parhar
    • Re: Increasing physical memory in WinCE, Dean Ramsier
    • Re: Increasing physical memory in WinCE, Parhar
      • Re: Increasing physical memory in WinCE, sbegumpeta
      • Re: Increasing physical memory in WinCE, Dean Ramsier
• Platform Codepage problem, Rifat OK
• PXA270 - USB buffer size, Panino
  • Re: PXA270 - USB buffer size, Erwin
    • Re: PXA270 - USB buffer size, Erwin
      • Re: PXA270 - USB buffer size, Panino
• Re: write eboot.bin to Flash memory, Yannick Chamming's [eMVP]
• Notification Add/Remove Network Card, vemax78
  • Re: Notification Add/Remove Network Card, Paul G. Tobey [eMVP]
    • Re: Notification Add/Remove Network Card, Massimo
      • Re: Notification Add/Remove Network Card, Paul G. Tobey [eMVP]
      • Re: Notification Add/Remove Network Card, Massimo
• control panel has two columns instead of three, Allanlunk
  • Re: control panel has two columns instead of three, Yannick Chamming's [eMVP]
    • Re: control panel has two columns instead of three, Allanlunk
      • Re: control panel has two columns instead of three, Allanlunk
      • Re: control panel has two columns instead of three, Tarun
      • Re: control panel has two columns instead of three, Allanlunk
• Restarted for mpg display..., smartslack
  • Re: Restarted for mpg display..., prabha
    • Re: Restarted for mpg display..., smartslack
• how to open files present in my harddisk...., kiran.india@xxxxxxxxx
  • Re: how to open files present in my harddisk...., Erwin
    • Re: how to open files present in my harddisk...., kiran.india@xxxxxxxxx
      • Re: how to open files present in my harddisk...., Erwin
      • Re: how to open files present in my harddisk...., kiran.india@xxxxxxxxx
      • Re: how to open files present in my harddisk...., Erwin
• Support RTTI, Gpeica
  • Re: Support RTTI, Ulrich Eckhardt
• RE: CE Support for USB to RS232 adapters, Brian
  • Re: CE Support for USB to RS232 adapters, Bill T
• USB device driver loading, Bill T
  • Re: USB device driver loading, SergeiR
    • Re: USB device driver loading, Bill T
      • Re: USB device driver loading, SergeiR
    • Re: USB device driver loading, Michel Verhagen \(eMVP\)
• Re: add file to EBOOT, Voidcoder
  • Re: add file to EBOOT, Aigor
    • Re: add file to EBOOT, Bruce Eitman \(eMVP\)
    • Re: add file to EBOOT, Voidcoder
    • Re: add file to EBOOT, K. S. Huang
• Application Specific Key Remapping, Chris Edgington
• Re: Run applications on devices without any user interface, Valter Minute
  • Message not available
    • Re: Run applications on devices without any user interface, Norman Rericha
      • Message not available
      • Re: Run applications on devices without any user interface, Anton Jarl
      • Message not available
      • Re: Run applications on devices without any user interface, os_parhar
  • Message not available
    • Re: Run applications on devices without any user interface, Valter Minute
• Re: How does WinCE create ceconfig.h, Bruce Eitman \(eMVP\)
• A stupid Platform Builder 5.0 question (Com_Card), Remi de Gravelaine
  • Re: A stupid Platform Builder 5.0 question (Com_Card), Bruce Eitman \(eMVP\)
    • Re: A stupid Platform Builder 5.0 question (Com_Card), Remi de Gravelaine
      • Re: A stupid Platform Builder 5.0 question (Com_Card), Bruce Eitman \(eMVP\)
      • Re: A stupid Platform Builder 5.0 question (Com_Card), Remi de Gravelaine
• Re: BuildSDK - I've Never Seen This Before, Gunnar Frenzel
  • Re: BuildSDK - I've Never Seen This Before, Scott Brewer
    • Re: BuildSDK - I've Never Seen This Before, Gunnar Frenzel
• How to know if the device running 802.11g or 802.11b, CiticPacific
  • Re: How to know if the device running 802.11g or 802.11b, CiticPacific
    • Re: How to know if the device running 802.11g or 802.11b, Piet
• XBox 360 BSP, Tomppa
  • Re: XBox 360 BSP, Yannick Chamming's [eMVP]
    • Re: XBox 360 BSP, Steve Maillet \(eMVP\)
  • Re: XBox 360 BSP, Henrik Viklund
  • Re: XBox 360 BSP, Valter Minute
    • Re: XBox 360 BSP, Tomppa
      • Re: XBox 360 BSP, Valter Minute
  • Re: XBox 360 BSP, Tomppa
    • Re: XBox 360 BSP, Steve Maillet \(eMVP\)
      • Re: XBox 360 BSP, Tomppa
      • Re: XBox 360 BSP, Steve Maillet \(eMVP\)
• Cisco ACU app problem with 5.0, Allanlunk
  • Re: Cisco ACU app problem with 5.0, <ctacke/>
    • Re: Cisco ACU app problem with 5.0, Allanlunk
• Removing KITL, the Xscale target hangs, paninocolsalame
  • Re: Removing KITL, the Xscale target hangs, Valter Minute
    • Re: Removing KITL, the Xscale target hangs, Dean Ramsier
      • Re: Removing KITL, the Xscale target hangs, Panino
      • Re: Removing KITL, the Xscale target hangs, Valter Minute
    • Re: Removing KITL, the Xscale target hangs, Panino
• CEPC Hard disk problem, ucm
  • Re: CEPC Hard disk problem, Remi de Gravelaine
    • Re: CEPC Hard disk problem, ucm
      • Re: CEPC Hard disk problem, Remi de Gravelaine
      • Re: CEPC Hard disk problem, ucm
• PXA270 - SD and MMC card Windows CE 5.0, WindowsCE_Developer
  • Re: PXA270 - SD and MMC card Windows CE 5.0, mobilevil
    • Re: PXA270 - SD and MMC card Windows CE 5.0, WindowsCE_Developer
      • Re: PXA270 - SD and MMC card Windows CE 5.0, WindowsCE_Developer
• Re: LINKSYS WCF54G 802.11 Wireless Compact Flash & CE, Valter Minute
• Re: Power Manager, Yannick Chamming's [eMVP]
  • <Possible follow-ups>
  • Re: Power Manager, Voidcoder
• Display problem! cant set 16bpp..., CAGRI
  • Re: Display problem! cant set 16bpp..., Voidcoder
    • Re: Display problem! cant set 16bpp..., CAGRI
      • Re: Display problem! cant set 16bpp..., Voidcoder
      • Re: Display problem! cant set 16bpp..., CAGRI
      • Re: Display problem! cant set 16bpp..., Voidcoder
      • Re: Display problem! cant set 16bpp..., CAGRI
      • Re: Display problem! cant set 16bpp..., Voidcoder
      • Re: Display problem! cant set 16bpp..., CAGRI
      • Re: Display problem! cant set 16bpp..., Voidcoder
      • Re: Display problem! cant set 16bpp..., CAGRI
      • Re: Display problem! cant set 16bpp..., Voidcoder
      • Re: Display problem! cant set 16bpp..., CAGRI
      • Re: Display problem! cant set 16bpp..., Voidcoder
      • Re: Display problem! cant set 16bpp..., CAGRI
      • Re: Display problem! cant set 16bpp..., Tomppa
      • Re: Display problem! cant set 16bpp..., CAGRI
• Re: Disable Zero Config in Windows Mobile 5.0, <ctacke/>
  • Re: Disable Zero Config in Windows Mobile 5.0, Kimo Jolin
  • <Possible follow-ups>
  • Re: Disable Zero Config in Windows Mobile 5.0, Paul G. Tobey [eMVP]
    • Re: Disable Zero Config in Windows Mobile 5.0, Kimo Jolin
      • Re: Disable Zero Config in Windows Mobile 5.0, Paul G. Tobey [eMVP]
      • Message not available
      • Re: Disable Zero Config in Windows Mobile 5.0, milan
      • Re: Disable Zero Config in Windows Mobile 5.0, Kimo Jolin
      • Re: Disable Zero Config in Windows Mobile 5.0, Kimo Jolin
      • Re: Disable Zero Config in Windows Mobile 5.0, Zhongwei Wang
• Detecting a paired Bluetooth device., ganesan
• INTERNAL COMPILER ERROR with "const" variable set with ternary operator, Tom Moon
  • Re: INTERNAL COMPILER ERROR with "const" variable set with ternary operator, Tom Moon
• stopping transcriber, Allanlunk
• Re: USB Keyboard porblem, Jules . Karim
  • Message not available
    • Re: USB Keyboard porblem, kiran.india@xxxxxxxxx
      • Re: USB Keyboard porblem, Dean Ramsier
      • Message not available
      • Re: USB Keyboard porblem, Dean Ramsier
      • Re: USB Keyboard porblem, Charles Wang
      • Re: USB Keyboard porblem, Dean Ramsier
      • Re: USB Keyboard porblem, Charles Wang
      • Re: USB Keyboard porblem, Dean Ramsier
      • Re: USB Keyboard porblem, Charles Wang
      • Re: USB Keyboard porblem, Dean Ramsier
• Re: jtag with pxa270, Bruce Eitman \(eMVP\)
  • Message not available
    • Re: jtag with pxa270, Anthony Pellerin
• WPAPSK problem: OID_802_11_ADD_KEY not called, Remi de Gravelaine
  • RE: WPAPSK problem: OID_802_11_ADD_KEY not called, "Soemin Tjong [MSFT]"
    • Re: WPAPSK problem: OID_802_11_ADD_KEY not called, Remi de Gravelaine
• Where should I download QFEs?, Michael Reim
  • Re: Where should I download QFEs?, Voidcoder
    • Re: Where should I download QFEs?, Voidcoder
  • Re: Where should I download QFEs?, Steve Maillet \(eMVP\)
• Hive registry on RelFSD, Michael Reim
  • Re: Hive registry on RelFSD, Gunnar Frenzel
    • Re: Hive registry on RelFSD, Michael Reim
    • Re: Hive registry on RelFSD, K. S. Huang
      • Re: Hive registry on RelFSD, Michael Reim
      • Re: Hive registry on RelFSD, K. S. Huang
      • Re: Hive registry on RelFSD, Michael Reim
      • Re: Hive registry on RelFSD, Dean Ramsier
      • Re: Hive registry on RelFSD, Michael Reim
      • Re: Hive registry on RelFSD, Sue Loh [MS]
      • Re: Hive registry on RelFSD, Michael Reim
      • Re: Hive registry on RelFSD, Norman Rericha
      • Re: Hive registry on RelFSD, Michael Reim
• CreateFile fails for COM2, milan
  • Re: CreateFile fails for COM2, Ulrich Eckhardt
    • Re: CreateFile fails for COM2, milan
      • Re: CreateFile fails for COM2, David Liao \(MS\)
      • Re: CreateFile fails for COM2, milan
      • Re: CreateFile fails for COM2, Remi de Gravelaine
      • Re: CreateFile fails for COM2, milan
      • Re: CreateFile fails for COM2, milan
      • Re: CreateFile fails for COM2, Bruce Eitman \(eMVP\)
      • Re: CreateFile fails for COM2, Remi de Gravelaine
      • Re: CreateFile fails for COM2, milan
      • Re: CreateFile fails for COM2, milan
      • Re: CreateFile fails for COM2, Remi de Gravelaine
      • Re: CreateFile fails for COM2, milan
      • Re: CreateFile fails for COM2, Parhar
• Problem about writing image file to AMD flash memory in S3C2410TK, tam
  • Re: Problem about writing image file to AMD flash memory in S3C2410TK, Anthony Pellerin
    • Re: Problem about writing image file to AMD flash memory in S3C2410TK, tam
      • Re: Problem about writing image file to AMD flash memory in S3C2410TK, Anthony Pellerin
      • Re: Problem about writing image file to AMD flash memory in S3C2410TK, tam
• What debug zone name to use for HeapAlloc?, Michael Reim
  • Re: What debug zone name to use for HeapAlloc?, Sue Loh [MS]
    • Re: What debug zone name to use for HeapAlloc?, Michael Reim
• VOIP using wireless LAN, Bryan Mok
  • Re: VOIP using wireless LAN, Paul G. Tobey [eMVP]
    • Re: VOIP using wireless LAN, Bryan Mok
      • Re: VOIP using wireless LAN, Paul G. Tobey [eMVP]
      • Re: VOIP using wireless LAN, Bryan Mok
      • Re: VOIP using wireless LAN, Bryan Mok
      • Re: VOIP using wireless LAN, Paul G. Tobey [eMVP]
• Which update rom method most WinCE using?, CiticPacific
  • Re: Which update rom method most WinCE using?, Yannick Chamming's [eMVP]
  • Re: Which update rom method most WinCE using?, Voidcoder
  • Re: Which update rom method most WinCE using?, Steve Maillet \(eMVP\)
• Possible to use Intel XDB JTAG Debugger to debug WinCE?, CiticPacific
  • Re: Possible to use Intel XDB JTAG Debugger to debug WinCE?, Yannick Chamming's [eMVP]
  • Re: Possible to use Intel XDB JTAG Debugger to debug WinCE?, Dean Ramsier
• SMUL opcode, bluesphere
  • Re: SMUL opcode, bluesphere
• CE.NET 5.0 Korean Support, deneb
• Re: Multiple IP Addresses, Jules . Karim
• ANN: Reminder: Windows CE Live Chat Tomorrow!, Sue Loh [MS]
• USB Function Driver - PXA25X - PDD implementation, pavelyk
  • Re: USB Function Driver - PXA25X - PDD implementation, Sha Viswanathan [MSFT]
    • Re: USB Function Driver - PXA25X - PDD implementation, pavelyk
      • Re: USB Function Driver - PXA25X - PDD implementation, Sha Viswanathan [MSFT]
      • Re: USB Function Driver - PXA25X - PDD implementation, pavelyk
      • Re: USB Function Driver - PXA25X - PDD implementation, Henrik Viklund
• USB Function Drdiver - PXA25X PDD implementation, pavelyk
• Re: color palette, Jules . Karim
  • Message not available
    • Re: color palette, Voidcoder
      • Message not available
      • Re: color palette, Voidcoder
      • Message not available
      • Re: color palette, Voidcoder
• CEPC Tutorial, ariano.lattanzi
  • Re: CEPC Tutorial, Chris Tacke, MVP
  • Re: CEPC Tutorial, Valter Minute
  • Re: CEPC Tutorial, Gpeica
  • Re: CEPC Tutorial, Jules . Karim
    • Re: CEPC Tutorial, ariano.lattanzi
      • Re: CEPC Tutorial, Remi de Gravelaine
      • Re: CEPC Tutorial, ariano.lattanzi
• Need help - Problem to build an SDK, Davidw
  • Re: Need help - Problem to build an SDK, Brian Bender
    • Re: Need help - Problem to build an SDK, Gunnar Frenzel
      • Re: Need help - Problem to build an SDK, Davidw
• do i need InterruptDone in my ISR., Sri
  • Re: do i need InterruptDone in my ISR., Jules . Karim
  • Re: do i need InterruptDone in my ISR., Steve Schrock [MS]
    • Re: do i need InterruptDone in my ISR., Sri
• MSDN-2540, Pretissimo2002
  • Re: MSDN-2540, Steve Maillet \(eMVP\)
    • Re: MSDN-2540, Pretissimo2002
      • Re: MSDN-2540, Steve Maillet \(eMVP\)
• too much waiting on startup.., CAGRI
  • Re: too much waiting on startup.., Remi de Gravelaine
    • Re: too much waiting on startup.., CAGRI
      • Re: too much waiting on startup.., Remi de Gravelaine
      • Message not available
      • Re: too much waiting on startup.., CAGRI
      • Message not available
      • Re: too much waiting on startup.., Remi de Gravelaine
      • Re: too much waiting on startup.., CAGRI
• usb rndis, system resume, mobilevil
  • Re: usb rndis, system resume, Henrik Viklund
    • Re: usb rndis, system resume, mobilevil
      • Re: usb rndis, system resume, David Liao \(MS\)
      • Re: usb rndis, system resume, mobilevil
• Playing wmv in samsung S3C2410TK board, tam
  • Re: Playing wmv in samsung S3C2410TK board, Yannick Chamming's [eMVP]
    • Re: Playing wmv in samsung S3C2410TK board, tam
      • Re: Playing wmv in samsung S3C2410TK board, Yannick Chamming's [eMVP]
• Re: Environment variable SYSGEN not defined, Michel Verhagen \(eMVP\)
• Re: New Readers, Paul G. Tobey [eMVP]
  • Re: New Readers, bluesphere
    • Re: New Readers, Paul G. Tobey [eMVP]
      • Re: New Readers, Dean Ramsier
      • Re: New Readers, bluesphere
• using GPIOs, Tobias
  • Re: using GPIOs, Bruce Eitman \(eMVP\)
    • Re: using GPIOs, Bruce Eitman \(eMVP\)
      • Re: using GPIOs, Yannick Chamming's [eMVP]
    • Re: using GPIOs, Valter Minute
      • Re: using GPIOs, Tobias
      • Re: using GPIOs, Henrik Viklund
      • Re: using GPIOs, Henrik Viklund
      • Re: using GPIOs, bluesphere
      • Re: using GPIOs, Valter Minute
      • Re: using GPIOs, Tobias
      • Re: using GPIOs, Paul G. Tobey [eMVP]
      • Re: using GPIOs, Valter Minute
      • Re: using GPIOs, Henrik Viklund
      • Re: using GPIOs, Tobias
  • Re: using GPIOs, Henrik Viklund
• Re: Managed c# code debug in PB/Ce5, Paul G. Tobey [eMVP]
  • Message not available
    • Re: Managed c# code debug in PB/Ce5, Paul G. Tobey [eMVP]
• Intel PSM (IPSM) issue, jollygreenfat
  • Re: Intel PSM (IPSM) issue, Paul G. Tobey [eMVP]
    • Re: Intel PSM (IPSM) issue, jollygreenfat
      • Re: Intel PSM (IPSM) issue, Paul G. Tobey [eMVP]
• How can i compile the samples?, CAGRI
  • Re: How can i compile the samples?, Anthony Pellerin
    • Re: How can i compile the samples?, CAGRI
• RNDIS PDD, lesson
  • Re: RNDIS PDD, Henrik Viklund
    • Re: RNDIS PDD, lesson
      • Re: RNDIS PDD, Henrik Viklund
      • Re: RNDIS PDD, mobilevil
• IOCTL_HAL_REBOOT problem, B.R.Liao
  • Re: IOCTL_HAL_REBOOT problem, Yannick Chamming's [eMVP]
• Problem with FILESYS_FSROMRAM, Michael Reim
  • Re: Problem with FILESYS_FSROMRAM, Yannick Chamming's [eMVP]
    • Re: Problem with FILESYS_FSROMRAM, Michael Reim
      • Re: Problem with FILESYS_FSROMRAM, Yannick Chamming's [eMVP]
      • Message not available
      • Re: Problem with FILESYS_FSROMRAM, Dean Ramsier
      • Re: Problem with FILESYS_FSROMRAM, Michael Reim
      • Re: Problem with FILESYS_FSROMRAM, Dean Ramsier
      • Re: Problem with FILESYS_FSROMRAM, Michael Reim
      • Re: Problem with FILESYS_FSROMRAM, Dean Ramsier
• Regarding the file "KbdXscXTMsEngUs1.dll", Sameer
• How to get OS Version?, herman . sujito
  • Re: How to get OS Version?, Bruce Eitman \(eMVP\)
    • Re: How to get OS Version?, herman . sujito
      • Re: How to get OS Version?, Bruce Eitman \(eMVP\)
      • Re: How to get OS Version?, herman . sujito
      • Re: How to get OS Version?, Bruce Eitman \(eMVP\)
      • Re: How to get OS Version?, herman . sujito
      • Re: How to get OS Version?, Norman Rericha
      • Re: How to get OS Version?, Sue Loh [MS]
• Problem configuring HID......, kiran.india@xxxxxxxxx
• ActiveSync [Guest only] problem on Window Mobile 5, pavelyk
• generate eboot.nb0 problem, xinchen
  • Re: generate eboot.nb0 problem, Anthony Pellerin
    • Re: generate eboot.nb0 problem, xinchen
  • Re: generate eboot.nb0 problem, Jules . Karim
    • Re: generate eboot.nb0 problem, xinchen
  • Re: generate eboot.nb0 problem, Bruce Eitman \(eMVP\)
    • Re: generate eboot.nb0 problem, xinchen
  • Re: generate eboot.nb0 problem, Yannick Chamming's [eMVP]
  • Re: generate eboot.nb0 problem, xinchen
• Exporting C++ class, ms
  • Re: Exporting C++ class, <ctacke/>
    • Re: Exporting C++ class, ms
  • Re: Exporting C++ class, voidcoder
    • Re: Exporting C++ class, ms
      • Re: Exporting C++ class, Chris Tacke, MVP
      • Re: Exporting C++ class, Voidcoder
      • Re: Exporting C++ class, ms
• Continue to develop a BSquare Handheld, CyberIzzy
  • Re: Continue to develop a BSquare Handheld, Steve Maillet \(eMVP\)
  • Re: Continue to develop a BSquare Handheld, <ctacke/>
    • Re: Continue to develop a BSquare Handheld, CyberIzzy
  • Re: Continue to develop a BSquare Handheld, Paul G. Tobey [eMVP]
  • Re: Continue to develop a BSquare Handheld, Jules . Karim
    • Re: Continue to develop a BSquare Handheld, CyberIzzy
• what happened to cepb 5.0 command line qualifiers?, troy anderson
  • Re: what happened to cepb 5.0 command line qualifiers?, Steve Maillet \(eMVP\)
    • Re: what happened to cepb 5.0 command line qualifiers?, Norman Rericha
      • Re: what happened to cepb 5.0 command line qualifiers?, Steve Maillet \(eMVP\)
      • Re: what happened to cepb 5.0 command line qualifiers?, Dean Ramsier
      • Re: what happened to cepb 5.0 command line qualifiers?, Norman Rericha
• How can I invalidate ce input system (e.g. keyboard input,mouse input)?, PowerAll
  • Re: How can I invalidate ce input system (e.g. keyboard input,mouse input)?, Bruce Eitman \(eMVP\)
• How can I wakeup ce system after ce enters into suspend state?, PowerAll
  • Re: How can I wakeup ce system after ce enters into suspend state?, voidcoder
  • Re: How can I wakeup ce system after ce enters into suspend state?, Bruce Eitman \(eMVP\)
• ActiveSync on WM5, pavelyk
• Re: Release Out Put Path setting, voidcoder
• should DMA Buffers be Noncacheable and Nonbufferable?, writetothiru
  • Re: should DMA Buffers be Noncacheable and Nonbufferable?, K. S. Huang
• Lock the TLB Entries for section mapped buffers, writetothiru
  • Re: Lock the TLB Entries for section mapped buffers, voidcoder
    • Re: Lock the TLB Entries for section mapped buffers, writetothiru
  • Re: Lock the TLB Entries for section mapped buffers, Sue Loh [MS]
• AYG Shell and control panel applets, gerrit
  • Re: AYG Shell and control panel applets, Norman Rericha
    • Re: AYG Shell and control panel applets, gerrit
• PC/SC reader, Antonio Andres
  • Re: PC/SC reader, Sergei Rusakov
• How to compile FSDSPY sample, guang hua
  • Re: How to compile FSDSPY sample, voidcoder
    • Re: How to compile FSDSPY sample, guang hua
      • Re: How to compile FSDSPY sample, Sue Loh [MS]
• ISA I/O accessing and I/O test question, wintiger
  • <Possible follow-ups>
  • ISA I/O accessing and I/O test question, wintiger
    • Re: ISA I/O accessing and I/O test question, Voidcoder
• Installing CAB file early in boot sequence, AJM42
  • Re: Installing CAB file early in boot sequence, AJM42
    • Re: Installing CAB file early in boot sequence, Anthony Pellerin
      • Re: Installing CAB file early in boot sequence, AJM42
      • Re: Installing CAB file early in boot sequence, Bruce Eitman \(eMVP\)
    • Re: Installing CAB file early in boot sequence, Paul G. Tobey [eMVP]
• Why NDIS miniport not invoke InitializeHandler function, Qinb.Zhang
  • Re: Why NDIS miniport not invoke InitializeHandler function, voidcoder
• remoteadmin problems / netadmin.dll equivalent in WinCE 5.0, Gunnar Frenzel
  • Re: remoteadmin problems / netadmin.dll equivalent in WinCE 5.0, John Spaith [MS]
    • Re: remoteadmin problems / netadmin.dll equivalent in WinCE 5.0, Gunnar Frenzel
• SDIO Multifunction, Daniel Diaz
• Re: multi-language support for WinCE 5.0, Henrik Viklund
• Re: Launch function in bootloader, Nicolas BESSON
• burn flash using Jtag interface, jadav
  • Re: burn flash using Jtag interface, Anthony Pellerin
  • Re: burn flash using Jtag interface, voidcoder
• Re: interrupt detection in Wince 5.0, Yannick Chamming's [eMVP]
  • Re: interrupt detection in Wince 5.0, Bruce Eitman \(eMVP\)
• PCMCIA Configuration for Wince 4.2, nalini . yadav
  • <Possible follow-ups>
  • PCMCIA Configuration for Wince 4.2, Nalini
• problem with USB devices using WIN CE 4.2 with platform builder, kiran.india@xxxxxxxxx
  • Re: problem with USB devices using WIN CE 4.2 with platform builder, Tarun
    • Re: problem with USB devices using WIN CE 4.2 with platform builder, kiran.india@xxxxxxxxx
      • Re: problem with USB devices using WIN CE 4.2 with platform builder, Yannick Chamming's [eMVP]
      • Re: problem with USB devices using WIN CE 4.2 with platform builder, Yannick Chamming's [eMVP]
  • Re: problem with USB devices using WIN CE 4.2 with platform builder, 5thWheel
    • Re: problem with USB devices using WIN CE 4.2 with platform builder, kiran.india@xxxxxxxxx
      • Re: problem with USB devices using WIN CE 4.2 with platform builder, 5thWheel
      • Re: problem with USB devices using WIN CE 4.2 with platform builder, 5thWheel
• Re: The components of WINCE desktop will be lost., Jules . Karim
  • Re: The components of WINCE desktop will be lost., Jules . Karim
• WinCE Update releases for the week of January 6 through January 18, 2005, QFE Admin \(MS\)
• Cesysgen NMAKE howto compile a driver DLL, Pretissimo2002
  • Re: Cesysgen NMAKE howto compile a driver DLL, Jules . Karim
    • Re: Cesysgen NMAKE howto compile a driver DLL, Pretissimo2002
      • Re: Cesysgen NMAKE howto compile a driver DLL, Steve Maillet \(eMVP\)
  • Re: Cesysgen NMAKE howto compile a driver DLL, Helge Kruse
    • Re: Cesysgen NMAKE howto compile a driver DLL, Pretissimo2002
• Re: Using visual studio 2005 with a platform builder 4.2 SDK (native), Tom Gensel \(eMVP\)
• IE explorer codepage problem.., Rifat OK
• USB Hid, Tarun
  • Re: USB Hid, Anthony Pellerin
    • Re: USB Hid, Tarun
      • Re: USB Hid, Yannick Chamming's [eMVP]
      • Re: USB Hid, Tarun
      • Re: USB Hid, Tarun
• HalAllocateCommonBuffer, bluesphere
• Re: SQL Mobile component, Anthony Pellerin
  • Re: SQL Mobile component, Valter Minute
  • <Possible follow-ups>
  • Re: SQL Mobile component, Valter Minute
    • Message not available
      • Re: SQL Mobile component, Valter Minute
      • Message not available
      • Re: SQL Mobile component, Valter Minute
    • Message not available
      • Re: SQL Mobile component, Paul G. Tobey [eMVP]
      • Re: SQL Mobile component, Valter Minute
      • Re: SQL Mobile component, Paul G. Tobey [eMVP]
      • Re: SQL Mobile component, Valter Minute
      • Re: SQL Mobile component, Paul G. Tobey [eMVP]
• difference with GDI CETK test, with the QFE 050630_2005Q2???, Vincent BELLOIR
  • Re: difference with GDI CETK test, with the QFE 050630_2005Q2???, Sha Viswanathan [MSFT]
    • Re: difference with GDI CETK test, with the QFE 050630_2005Q2???, Vincent BELLOIR
      • Re: difference with GDI CETK test, with the QFE 050630_2005Q2???, Sha Viswanathan [MSFT]
• CETK GDI test with, Vincent BELLOIR
  • Re: CETK GDI test with, Vincent BELLOIR
• About using sysgen capture, tam
  • Re: About using sysgen capture, Anthony Pellerin
    • Re: About using sysgen capture, tam
      • Re: About using sysgen capture, Anthony Pellerin
      • Re: About using sysgen capture, tam
• USB Touch Controller for XSCALE, longway_bme
  • Re: USB Touch Controller for XSCALE, Yannick Chamming's [eMVP]
    • Re: USB Touch Controller for XSCALE, longway_bme
      • Re: USB Touch Controller for XSCALE, longway_bme
      • Re: USB Touch Controller for XSCALE, Voidcoder
      • Re: USB Touch Controller for XSCALE, longway_bme
      • Re: USB Touch Controller for XSCALE, longway_bme
• Lubbock BSP Porting, Fornazin
  • Re: Lubbock BSP Porting, Yannick Chamming's [eMVP]
    • Re: Lubbock BSP Porting, Fornazin
  • Re: Lubbock BSP Porting, Valter Minute
    • Re: Lubbock BSP Porting, Duncan U. Harper
      • Re: Lubbock BSP Porting, Fornazin
• How to support dial-up modem on CEPC?, shallac8
  • Re: How to support dial-up modem on CEPC?, Michel Verhagen \(eMVP\)
  • Re: How to support dial-up modem on CEPC?, Remi de Gravelaine
    • Re: How to support dial-up modem on CEPC?, shallac8
      • Re: How to support dial-up modem on CEPC?, Remi de Gravelaine
      • Re: How to support dial-up modem on CEPC?, shallac8
      • Re: How to support dial-up modem on CEPC?, Remi de Gravelaine
      • Re: How to support dial-up modem on CEPC?, shallac8
• MmMapIoSpace limited to 32MByte, Helge Kruse
  • Re: MmMapIoSpace limited to 32MByte, Remi de Gravelaine
    • Re: MmMapIoSpace limited to 32MByte, Helge Kruse
      • Re: MmMapIoSpace limited to 32MByte, Raphael Baum
• Re: USBFN & Mass Storage, Henrik Viklund
  • Message not available
    • Re: USBFN & Mass Storage, David Liao \(MS\)
      • Message not available
      • Re: USBFN & Mass Storage, Henrik Viklund
  • Message not available
    • Re: USBFN & Mass Storage, Henrik Viklund
• Re: Active Sync Problem, Piet
  • <Possible follow-ups>
  • Re: Active Sync Problem, Dean Ramsier
    • Re: Active Sync Problem, Jules . Karim
  • Re: Active Sync Problem, xinchen
• Windows CE Medical FDA Guidelines, Mams
  • Re: Windows CE Medical FDA Guidelines, Dean Ramsier
    • Re: Windows CE Medical FDA Guidelines, Henrik Viklund
    • Re: Windows CE Medical FDA Guidelines, Henrik Viklund
      • Re: Windows CE Medical FDA Guidelines, Dean Ramsier
      • Re: Windows CE Medical FDA Guidelines, skindiver
      • Re: Windows CE Medical FDA Guidelines, Henrik Viklund
      • Re: Windows CE Medical FDA Guidelines, Alex
      • Re: Windows CE Medical FDA Guidelines, Steve Maillet \(eMVP\)
      • Re: Windows CE Medical FDA Guidelines, A.User
    • Re: Windows CE Medical FDA Guidelines, Steve Maillet \(eMVP\)
• EBoot RTL8169, mfr
  • Re: EBoot RTL8169, mobilevil
    • Re: EBoot RTL8169, mfr
      • Re: EBoot RTL8169, mobilevil
• load hive registry from hard disk failed, Maverick
  • Re: load hive registry from hard disk failed, Michel Verhagen \(eMVP\)
    • Re: load hive registry from hard disk failed, Maverick
• Re: Recomended books for platform builder, Yannick Chamming's [eMVP]
  • <Possible follow-ups>
  • Re: Recomended books for platform builder, Norman Rericha
    • Re: Recomended books for platform builder, Jules . Karim
• Re: Graphic Window - Freescale iMX21, Yannick Chamming's [eMVP]
  • <Possible follow-ups>
  • Re: Graphic Window - Freescale iMX21, Louis Clausen [MS]
  • Re: Graphic Window - Freescale iMX21, gerrit
• Re: keyboard layout and driver, Yannick Chamming's [eMVP]
  • Message not available
    • Re: keyboard layout and driver, Yannick Chamming's [eMVP]
  • <Possible follow-ups>
  • Re: keyboard layout and driver, Travis Hobrla [MS]
  • Re: keyboard layout and driver, Dean Ramsier
• third-party bsp to 5.0, Je
  • Re: third-party bsp to 5.0, Yannick Chamming's [eMVP]
• edbg driver power off and power on., mobilevil
  • Re: edbg driver power off and power on., mobilevil
• MS DRM 7.1, mrmanic
• Checksums, mrmanic
  • Re: Checksums, Yannick Chamming's [eMVP]
• Re: WinCE 5.0 VoIP, Rajesh [MSFT]
• Intels ichide and partitions found, R. de Vreede
• Re: Ethernet download of large nk.bin fails at same location with Esh, Dean Ramsier
• Can I customize the standard shell, slyzhang
  • Re: Can I customize the standard shell, slyzhang
    • Re: Can I customize the standard shell, Yannick Chamming's [eMVP]
  • Re: Can I customize the standard shell, Paul G. Tobey [eMVP]
  • Re: Can I customize the standard shell, Norman Rericha
• Re: Creating my own SDk, Yannick Chamming's [eMVP]
  • Message not available
    • Re: Creating my own SDk, Yannick Chamming's [eMVP]
• IE without toolbars????, XPEnew
  • Message not available
    • Re: IE without toolbars????, XPEnew
• calendar control, js
• Re: about Auido Virtual driver, K. S. Huang
• How do I invert left-right sense of the mouse in CE.Net by intercepting mouse movement info after it has left the mouse driver?, 5thWheel
  • Re: How do I invert left-right sense of the mouse in CE.Net by intercepting mouse movement info after it has left the mouse driver?, Yannick Chamming's [eMVP]
    • Re: How do I invert left-right sense of the mouse in CE.Net by intercepting mouse movement info after it has left the mouse driver?, 5thWheel
      • Re: How do I invert left-right sense of the mouse in CE.Net by intercepting mouse movement info after it has left the mouse driver?, 5thWheel
• Task Bar ( Auto hide and Always on top ), Raceala Andrei
  • Re: Task Bar ( Auto hide and Always on top ), Henrik Viklund
    • Message not available
      • Re: Task Bar ( Auto hide and Always on top ), Paul G. Tobey [eMVP]
    • Message not available
      • Re: Task Bar ( Auto hide and Always on top ), Henrik Viklund
      • Re: Task Bar ( Auto hide and Always on top ), Raceala Andrei
• how do I update nk.bin ? HELP, B.R.Liao
  • Re: how do I update nk.bin ? HELP, Henrik Viklund
    • Re: how do I update nk.bin ? HELP, B.R.Liao
      • Re: how do I update nk.bin ? HELP, Henrik Viklund
  • Re: how do I update nk.bin ? HELP, Anthony Pellerin
    • Re: how do I update nk.bin ? HELP, B.R.Liao
      • Re: how do I update nk.bin ? HELP, Anthony Pellerin
• Data lost when reset, Bryan Mok
  • Re: Data lost when reset, gerrit
    • Re: Data lost when reset, Anthony Pellerin
  • Re: Data lost when reset, Dean Ramsier
    • Re: Data lost when reset, gerrit
      • Re: Data lost when reset, Dean Ramsier
      • Re: Data lost when reset, Bryan Mok
      • Re: Data lost when reset, gerrit
      • Re: Data lost when reset, Anthony Pellerin
• Re: Build driver in Public folder, Anthony Pellerin
  • Message not available
    • Re: Build driver in Public folder, K. S. Huang
• Downloading the boot loader to the S3C2410TK board, tam
  • Re: Downloading the boot loader to the S3C2410TK board, Andy Shi
  • Re: Downloading the boot loader to the S3C2410TK board, Anthony Pellerin
    • Re: Downloading the boot loader to the S3C2410TK board, tam
      • Re: Downloading the boot loader to the S3C2410TK board, Anthony Pellerin
• Re: How to hide the "Input Method"(IME) window??, Public
• Re: USB Printer Client Driver question.(MS guys come in), David Liao \(MS\)
  • Message not available
    • Re: USB Printer Client Driver question.(MS guys come in), David Liao \(MS\)
  • Message not available
    • Re: USB Printer Client Driver question.(MS guys come in), Valter Minute
• Re: system halt after oeminit, Voidcoder
  • Message not available
    • Re: system halt after oeminit, Voidcoder
      • Message not available
      • Re: system halt after oeminit, Voidcoder
      • Re: system halt after oeminit, Frank.Z
      • Re: system halt after oeminit, Voidcoder
      • Message not available
      • Re: system halt after oeminit, voidcoder
      • Message not available
      • Re: system halt after oeminit, Voidcoder
      • Message not available
      • Re: system halt after oeminit, Voidcoder
      • Message not available
      • Message not available
      • Re: system halt after oeminit, voidcoder
• Bluetooth usb component / configuration wince 5.0, Roberto
  • Re: Bluetooth usb component / configuration wince 5.0, Valter Minute
    • Re: Bluetooth usb component / configuration wince 5.0, Roberto
      • Re: Bluetooth usb component / configuration wince 5.0, Valter Minute
      • Re: Bluetooth usb component / configuration wince 5.0, Roberto
      • Re: Bluetooth usb component / configuration wince 5.0, Roberto
• Adding MSHTML_HTMLAPP feature from catalog into existing platform project does not add all the required libraries and registries., whidbeywave
  • Re: Adding MSHTML_HTMLAPP feature from catalog into existing platform project does not add all the required libraries and registries., whidbeywave
• Disable/Enable DHCP, Tweeeek
  • Re: Disable/Enable DHCP, Tweeeek
    • Re: Disable/Enable DHCP, Paul G. Tobey [eMVP]
• Mobile OS version, Mhaxx
  • Re: Mobile OS version, Chris Tacke, MVP
• Re: Connection problem!!??Help, Yannick Chamming's [eMVP]
• Re: what are the steps to add my code for class driver like printer cl, Yannick Chamming's [eMVP]
• Where to find WDbgExts_CE.h?, David Holcomb
• Visual Studio 2005 Native Applications, Pretissimo2002
  • Re: Visual Studio 2005 Native Applications, Sven Doe
    • Re: Visual Studio 2005 Native Applications, Pretissimo2002
• Re: Intel video card, Gpeica
• Remote tools do not connect to device?, Tomppa
  • Re: Remote tools do not connect to device?, voidcoder
• NetUI.DLL problem!? Help, B.R.Liao
  • Re: NetUI.DLL problem!? Help, Paul G. Tobey [eMVP]
• Platform Builder 5.0 question, Steve
  • Re: Platform Builder 5.0 question, Paul G. Tobey [eMVP]
    • Re: Platform Builder 5.0 question, Steve
  • Re: Platform Builder 5.0 question, Remi de Gravelaine
    • Re: Platform Builder 5.0 question, Steve
• 802.11 adapter for CE 5.0, leap compatible, lorrainek
  • Re: 802.11 adapter for CE 5.0, leap compatible, Tomppa
  • Re: 802.11 adapter for CE 5.0, leap compatible, <ctacke/>
    • Re: 802.11 adapter for CE 5.0, leap compatible, Tomppa
  • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
    • Re: 802.11 adapter for CE 5.0, leap compatible, Lorraine
      • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
      • Re: 802.11 adapter for CE 5.0, leap compatible, Lorraine
      • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
      • Re: 802.11 adapter for CE 5.0, leap compatible, Lorraine
      • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
      • Re: 802.11 adapter for CE 5.0, leap compatible, Lorraine
      • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
      • Re: 802.11 adapter for CE 5.0, leap compatible, Lorraine
      • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
      • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
  • Re: 802.11 adapter for CE 5.0, leap compatible, Rémi de Gravelaine
    • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
      • Re: 802.11 adapter for CE 5.0, leap compatible, Remi de Gravelaine
      • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
      • Re: 802.11 adapter for CE 5.0, leap compatible, Remi de Gravelaine
      • Re: 802.11 adapter for CE 5.0, leap compatible, Paul G. Tobey [eMVP]
  • Re: 802.11 adapter for CE 5.0, leap compatible, Remi de Gravelaine
• PXA270 embedded LCD controller vs. Intel 2700G5, George B
  • Re: PXA270 embedded LCD controller vs. Intel 2700G5, Dean Ramsier
    • Re: PXA270 embedded LCD controller vs. Intel 2700G5, Alex
      • Re: PXA270 embedded LCD controller vs. Intel 2700G5, Dean Ramsier
      • Re: PXA270 embedded LCD controller vs. Intel 2700G5, Piet
      • Re: PXA270 embedded LCD controller vs. Intel 2700G5, Dean Ramsier
      • Re: PXA270 embedded LCD controller vs. Intel 2700G5, Valter Minute
• Re: ceconfig.h to catalog mappings, Bruce Eitman \(eMVP\)
  • Message not available
    • Re: ceconfig.h to catalog mappings, Bruce Eitman \(eMVP\)
  • Message not available
    • Re: ceconfig.h to catalog mappings, Zhongwei Wang
      • Re: ceconfig.h to catalog mappings, Steve Maillet \(eMVP\)
  • Re: ceconfig.h to catalog mappings, Steve Maillet \(eMVP\)
• RE: How to add an application to the run time image, Valter Minute
  • <Possible follow-ups>
  • Re: How to add an application to the run time image, Norman Rericha
• very confused about the pccard/pcmcia drivers in 5.0, mobilevil
  • Re: very confused about the pccard/pcmcia drivers in 5.0, Yannick Chamming's [eMVP]
  • Re: very confused about the pccard/pcmcia drivers in 5.0, Dean Ramsier
    • Re: very confused about the pccard/pcmcia drivers in 5.0, mobilevil
      • Re: very confused about the pccard/pcmcia drivers in 5.0, Steve Maillet \(eMVP\)
      • Re: very confused about the pccard/pcmcia drivers in 5.0, mobilevil
      • Re: very confused about the pccard/pcmcia drivers in 5.0, Yannick Chamming's [eMVP]
• .Net CF 2.0. Does it support ARM cpu?, B.R.Liao
  • Re: .Net CF 2.0. Does it support ARM cpu?, Norman Rericha
  • Re: .Net CF 2.0. Does it support ARM cpu?, <ctacke/>
• Building strings, Safiiru no Baka
  • Re: Building strings, Paul G. Tobey [eMVP]
    • Re: Building strings, Safiiru no Baka
      • Re: Building strings, Paul G. Tobey [eMVP]
• Re: Hive-Based Registry Question, Michael Schaffner, P.E.
  • Re: Hive-Based Registry Question, Bruce Eitman \(eMVP\)
    • Re: Hive-Based Registry Question, Michael Schaffner, P.E.
  • Message not available
    • Re: Hive-Based Registry Question, Paul G. Tobey [eMVP]
  • <Possible follow-ups>
  • Hive-based registry question, Zhongwei Wang
    • Re: Hive-based registry question, cang.zhang
      • Re: Hive-based registry question, Bruce Eitman \(eMVP\)
      • Re: Hive-based registry question, Zhongwei Wang
      • Re: Hive-based registry question, Paul G. Tobey [eMVP]
      • Re: Hive-based registry question, Bruce Eitman \(eMVP\)
      • Re: Hive-based registry question, Dean Ramsier
      • Re: Hive-based registry question, Bruce Eitman \(eMVP\)
      • Re: Hive-based registry question, Zhongwei Wang
      • Re: Hive-based registry question, Dean Ramsier
      • Re: Hive-based registry question, Steve Maillet \(eMVP\)
      • Re: Hive-based registry question, Bruce Eitman \(eMVP\)
• Coredll patch Windows CE 4.21, Antonio Andres
  • Re: Coredll patch Windows CE 4.21, John Spaith [MS]
    • Re: Coredll patch Windows CE 4.21, Dean Ramsier
    • Re: Coredll patch Windows CE 4.21, Antonio Andres
      • Re: Coredll patch Windows CE 4.21, Ganapathy Raman \(MS\)
      • Re: Coredll patch Windows CE 4.21, Antonio Andres
      • Re: Coredll patch Windows CE 4.21, Ganapathy Raman \(MS\)
      • Re: Coredll patch Windows CE 4.21, Antonio Andres
• Re: Azerty USB keyboard on Windows CE 4.2 .net, Remi de Gravelaine
  • <Possible follow-ups>
  • Re: Azerty USB keyboard on Windows CE 4.2 .net, Yannick Chamming's [eMVP]
• Obtain a text file with the output window in a compilation, carlos
  • Re: Obtain a text file with the output window in a compilation, <ctacke/>
  • Re: Obtain a text file with the output window in a compilation, Duncan U. Harper
• Ignoring start-up, Mhaxx
  • Re: Ignoring start-up, Voidcoder
    • Re: Ignoring start-up, Bruce Eitman \(eMVP\)
      • Re: Ignoring start-up, Mhaxx
    • Re: Ignoring start-up, Mhaxx
      • Re: Ignoring start-up, Henrik Viklund
      • Re: Ignoring start-up, Mhaxx
      • Re: Ignoring start-up, Mhaxx
      • Re: Ignoring start-up, Voidcoder
• power management for USB class driver, Rashmi T S
  • Re: power management for USB class driver, David Liao \(MS\)
    • Re: power management for USB class driver, Rashmi T S
      • Re: power management for USB class driver, David Liao \(MS\)
      • Re: power management for USB class driver, Rashmi T S
      • Re: power management for USB class driver, David Liao \(MS\)
• Re: QFE/Patch Updates and different architectures, Steve Maillet \(eMVP\)
• Re: Error in the Cesysgen process, Erwin
  • Re: Error in the Cesysgen process, TaN
    • Re: Error in the Cesysgen process, Steve Maillet \(eMVP\)
• Any patch available for CardBus support in WinCE4.2, raj
  • <Possible follow-ups>
  • Any patch available for CardBus support in WinCE4.2, raj
  • Any patch available for CardBus support in WinCE4.2, raj
    • Re: Any patch available for CardBus support in WinCE4.2, Paul G. Tobey [eMVP]
      • Re: Any patch available for CardBus support in WinCE4.2, raj
• Any Patch for Cardbus support in Wince, raj1980
• WinCEPC Help: Setting static IP address for nk.bin image, Cletus
  • Re: WinCEPC Help: Setting static IP address for nk.bin image, Piet
    • Re: WinCEPC Help: Setting static IP address for nk.bin image, Cletus
      • Re: WinCEPC Help: Setting static IP address for nk.bin image, Henrik Viklund
      • Re: WinCEPC Help: Setting static IP address for nk.bin image, Henrik Viklund
      • Message not available
      • Re: WinCEPC Help: Setting static IP address for nk.bin image, Cletus
      • Re: WinCEPC Help: Setting static IP address for nk.bin image, Dean Ramsier
• Re: MainstoneII USB cable detection, Henrik Viklund
  • <Possible follow-ups>
  • Re: MainstoneII USB cable detection, Voidcoder
    • Message not available
      • Re: MainstoneII USB cable detection, Voidcoder
• Re: debug driver/project release everything else??, Michael Reim
  • Re: debug driver/project release everything else??, Henrik Viklund
  • Re: debug driver/project release everything else??, Henrik Viklund
  • Re: debug driver/project release everything else??, Steve Maillet \(eMVP\)
• RE: problem faced during USB Host CETK testing/net2280, Harish Shivaji Rane
• RE: Problem with Zero config, Harish Shivaji Rane
  • Message not available
    • RE: Problem with Zero config, Harish Shivaji Rane
• Re: Missing kdstub.dll in image, failed to connect, Yannick Chamming's [eMVP]
  • Re: Missing kdstub.dll in image, failed to connect, my
    • Re: Missing kdstub.dll in image, failed to connect, Dean Ramsier
      • Re: Missing kdstub.dll in image, failed to connect, my
• Re: Simultaneous host and device access, Dean Ramsier
  • Re: Simultaneous host and device access, rscala
    • Re: Simultaneous host and device access, Henrik Viklund
    • Re: Simultaneous host and device access, Henrik Viklund
• Add project from given source, Safiiru no Baka
  • Re: Add project from given source, Steve Maillet \(eMVP\)
    • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Paul G. Tobey [eMVP]
      • Re: Add project from given source, Steve Maillet \(eMVP\)
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Paul G. Tobey [eMVP]
      • Re: Add project from given source, Henrik Viklund
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Paul G. Tobey [eMVP]
      • Re: Add project from given source, Henrik Viklund
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Dean Ramsier
      • Re: Add project from given source, Henrik Viklund
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Henrik Viklund
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Dean Ramsier
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Safiiru no Baka
      • Re: Add project from given source, Henrik Viklund
• Re: How to recompile/build source from private/winceos/coreos/core/dll, Tom Gensel \(eMVP\)
  • Re: How to recompile/build source from private/winceos/coreos/core/dll, Steve Maillet \(eMVP\)
    • Re: How to recompile/build source from private/winceos/coreos/core/dll, Tom Gensel \(eMVP\)
• porting windows ce 3.0 on intel sa1110, srikanthtanikonda@xxxxxxxxx
• Re: USB keyboard issue in IXDP420 CPU, K. S. Huang
• Create platform SDK with PB, David
  • Re: Create platform SDK with PB, Voidcoder
    • Re: Create platform SDK with PB, David
      • Re: Create platform SDK with PB, Voidcoder
    • Re: Create platform SDK with PB, David
• ROM version, Mhaxx
  • Re: ROM version, slyzhang
• Re: problem getting Flash device Id, Tom Gensel \(eMVP\)
  • <Possible follow-ups>
  • Re: problem getting Flash device Id, Steve Maillet \(eMVP\)
  • Re: problem getting Flash device Id, Voidcoder
• Re: Problem in KernelStart/armtrap.s, Steve Maillet \(eMVP\)
  • Re: Problem in KernelStart/armtrap.s, CEinTX
    • Re: Problem in KernelStart/armtrap.s, Dean Ramsier
      • Re: Problem in KernelStart/armtrap.s, CEinTX
      • Re: Problem in KernelStart/armtrap.s, CEinTX
      • Re: Problem in KernelStart/armtrap.s, Dean Ramsier
      • Re: Problem in KernelStart/armtrap.s, Steve Maillet \(eMVP\)
• Windows CE on a desktop?, John Flynn
  • Re: Windows CE on a desktop?, Paul G. Tobey [eMVP]
    • Re: Windows CE on a desktop?, John Flynn
      • Re: Windows CE on a desktop?, <ctacke/>
      • Re: Windows CE on a desktop?, Paul G. Tobey [eMVP]
• Re: volatile pointer to GPIO register, Steve Maillet \(eMVP\)
  • <Possible follow-ups>
  • Re: volatile pointer to GPIO register, Bruce Eitman \(eMVP\)
    • Re: volatile pointer to GPIO register, authorwjf
      • Re: volatile pointer to GPIO register, authorwjf
      • Re: volatile pointer to GPIO register, Dean Ramsier
      • Re: volatile pointer to GPIO register, Bruce Eitman \(eMVP\)
      • Re: volatile pointer to GPIO register, authorwjf
      • Re: volatile pointer to GPIO register, Steve Maillet \(eMVP\)
• Consuming a DLL, Safiiru no Baka
  • Re: Consuming a DLL, Steve Maillet \(eMVP\)
    • Re: Consuming a DLL, Safiiru no Baka
  • Re: Consuming a DLL, Paul G. Tobey [eMVP]
    • Re: Consuming a DLL, Safiiru no Baka
      • Re: Consuming a DLL, Paul G. Tobey [eMVP]
      • Re: Consuming a DLL, Safiiru no Baka
      • Re: Consuming a DLL, Paul G. Tobey [eMVP]
      • Re: Consuming a DLL, Sven Doe
      • Re: Consuming a DLL, Safiiru no Baka
      • Re: Consuming a DLL, Paul G. Tobey [eMVP]
      • Re: Consuming a DLL, Safiiru no Baka
      • Re: Consuming a DLL, Steve Maillet \(eMVP\)
      • Re: Consuming a DLL, Paul G. Tobey [eMVP]
• Re: question about BSP source code, Michael Schaffner, P.E.
• Does FSRAMPERCENT work?, dgipling
  • Re: Does FSRAMPERCENT work?, Steve Maillet \(eMVP\)
    • Re: Does FSRAMPERCENT work?, dgipling
      • Re: Does FSRAMPERCENT work?, Tom Gensel \(eMVP\)
    • Re: Does FSRAMPERCENT work?, dgipling
      • Re: Does FSRAMPERCENT work?, Bruce Eitman \(eMVP\)
• BSP port, Mhaxx
  • Re: BSP port, Bruce Eitman \(eMVP\)
    • Re: BSP port, Mhaxx
      • Re: BSP port, Bruce Eitman \(eMVP\)
      • Re: BSP port, Bruce Eitman \(eMVP\)
      • Re: BSP port, Mhaxx
      • Re: BSP port, <ctacke/>
      • Re: BSP port, Mhaxx
      • Re: BSP port, Voidcoder
      • Re: BSP port, Mhaxx
      • Re: BSP port, Voidcoder
      • Re: BSP port, Mhaxx
      • Re: BSP port, Dean Ramsier
      • Re: BSP port, Voidcoder
      • Re: BSP port, Mhaxx
      • Re: BSP port, <ctacke/>
      • Re: BSP port, Voidcoder
      • Re: BSP port, Voidcoder
      • Re: BSP port, Mhaxx
      • Re: BSP port, Voidcoder
      • Re: BSP port, Voidcoder
      • Re: BSP port, Steve Maillet \(eMVP\)
      • Re: BSP port, Mark
      • Re: BSP port, Mhaxx
      • Re: BSP port, Danny
      • Re: BSP port, Mhaxx
• PlatformBuilder command widow, Jimmy
  • Re: PlatformBuilder command widow, Remi de Gravelaine
    • Re: PlatformBuilder command widow, Jimmy
    • Re: PlatformBuilder command widow, Jimmy
      • Re: PlatformBuilder command widow, Steve Maillet \(eMVP\)
  • Re: PlatformBuilder command widow, Henrik Viklund
    • Re: PlatformBuilder command widow, Jimmy
• Windows Ce 4.2 stop debug on com 1, Raceala Andrei
  • Re: Windows Ce 4.2 stop debug on com 1, Shutruk Nahunte
    • Re: Windows Ce 4.2 stop debug on com 1, Raceala Andrei
      • Re: Windows Ce 4.2 stop debug on com 1, Dean Ramsier
      • Re: Windows Ce 4.2 stop debug on com 1, Pretolesi Riccardo
      • Re: Windows Ce 4.2 stop debug on com 1, Raceala Andrei
• Unidentified PCCard Adapter(wince 5,imx21), zhchao
  • Re: Unidentified PCCard Adapter(wince 5,imx21), zhchao
    • Re: Unidentified PCCard Adapter(wince 5,imx21), Zhongwei Wang
      • Re: Unidentified PCCard Adapter(wince 5,imx21), zhchao
    • Re: Unidentified PCCard Adapter(wince 5,imx21), David Liao \(MS\)
      • Re: Unidentified PCCard Adapter(wince 5,imx21), zhchao
      • Re: Unidentified PCCard Adapter(wince 5,imx21), zhchao
• is it possible to hide a fat partition?, mobilevil
  • Re: is it possible to hide a fat partition?, Steve Maillet \(eMVP\)
    • Message not available
      • Re: is it possible to hide a fat partition?, Dean Ramsier
      • Re: is it possible to hide a fat partition?, Steve Maillet \(eMVP\)
• I want load stream driver Using ActiveDeviceEx or RegisterDevice, wintiger
  • Re: I want load stream driver Using ActiveDeviceEx or RegisterDevice, Henrik Viklund
  • Re: I want load stream driver Using ActiveDeviceEx or RegisterDevice, Bruce Eitman \(eMVP\)
  • Re: I want load stream driver Using ActiveDeviceEx or RegisterDevice, bluesphere
• after flash nk.bin to FLASH...., LILO
  • Re: after flash nk.bin to FLASH...., Yannick Chamming's [eMVP]
    • Re: after flash nk.bin to FLASH...., LILO
• Re: Chinese IME: MSPY 3.0, <ctacke/>
  • Message not available
    • Message not available
      • Re: Chinese IME: MSPY 3.0, <ctacke/>
• Irda and Bluetooth, Bryan Mok
• SAPI & .net, Cyprien Autexier
  • Re: SAPI & .net, Paul G. Tobey [eMVP]
    • Re: SAPI & .net, Cyprien Autexier
      • Re: SAPI & .net, Bertrand CACHET
      • Re: SAPI & .net, Paul G. Tobey [eMVP]
      • Re: SAPI & .net, Cyprien Autexier
      • Re: SAPI & .net, Cyprien Autexier
      • Re: SAPI & .net, Paul G. Tobey [eMVP]
      • Re: SAPI & .net, Cyprien Autexier
• CEPB crash in PB for CE 5.0, Mark
  • Re: CEPB crash in PB for CE 5.0, Dean Ramsier
    • Re: CEPB crash in PB for CE 5.0, Mark
      • Re: CEPB crash in PB for CE 5.0, Chris Tacke, eMVP
      • Re: CEPB crash in PB for CE 5.0, Mark
      • Re: CEPB crash in PB for CE 5.0, <ctacke/>
      • Re: CEPB crash in PB for CE 5.0, Dean Ramsier
      • Re: CEPB crash in PB for CE 5.0, Mark
      • Re: CEPB crash in PB for CE 5.0, Mark
      • Re: CEPB crash in PB for CE 5.0, Dean Ramsier
• Re: Mount Hive files, Tom Gensel \(eMVP\)
• USB Host Controller powering down during suspend/resume, PG
  • Re: USB Host Controller powering down during suspend/resume, Tom Gensel \(eMVP\)
    • Re: USB Host Controller powering down during suspend/resume, PG
      • Re: USB Host Controller powering down during suspend/resume, Tom Gensel \(eMVP\)
• KITL problem, zhiqiang
  • RE: KITL problem, Woojung
  • Re: KITL problem, Steve Maillet \(eMVP\)
• Re: Precompiler : KITL enabled ?, Anthony Pellerin
  • <Possible follow-ups>
  • Re: Precompiler : KITL enabled ?, Steve Maillet \(eMVP\)
• Prism 3 CE driver pls, George B
• About using SMDK2410 BSP to build image for Samsung S3C2410TK board, tam
  • Re: About using SMDK2410 BSP to build image for Samsung S3C2410TK board, Anthony Pellerin
    • Re: About using SMDK2410 BSP to build image for Samsung S3C2410TK board, tam
• help!!! After suspend/resume,filesystem is wrong?!, vacherin
  • <Possible follow-ups>
  • Re: help!!! After suspend/resume,filesystem is wrong?!, Anthony Pellerin
    • Re: help!!! After suspend/resume,filesystem is wrong?!, vacherin
• About editing NK.bin, hakan aktan
  • Re: About editing NK.bin, Dean Ramsier
• Booting CEPC from Hard drive does not realize SD Memory Cards, prabha
• Re: Kernel sheduler, Steve Maillet \(eMVP\)
  • Message not available
    • Re: Kernel sheduler, <ctacke/>
  • Message not available
    • Re: Kernel sheduler, Steve Maillet \(eMVP\)
• Next version of Windows CE, Bill T
  • Re: Next version of Windows CE, Steve Maillet \(eMVP\)
    • Re: Next version of Windows CE, <ctacke/>
• RNDIS USB function for ActiveSync, skindiver
  • RE: RNDIS USB function for ActiveSync, Harish Shivaji Rane
• Problem on executing the MTC15 in KernelStart, alagusakthi@xxxxxxxxx
  • Re: Problem on executing the MTC15 in KernelStart, Dean Ramsier
• Problem on executing the MCR in Kernel Start, alagusakthi@xxxxxxxxx
• Re: PB getting crashed!!, Steve Maillet \(eMVP\)
  • Message not available
    • Re: PB getting crashed!!, Mark
      • Re: PB getting crashed!!, Dean Ramsier
• Re: question about backlight setting, K. S. Huang
  • Message not available
    • Re: question about backlight setting, Steve Maillet \(eMVP\)
      • Message not available
      • Re: question about backlight setting, Steve Maillet \(eMVP\)
      • Message not available
      • Re: question about backlight setting, D