Problem with performance of IDE devices

Hi,
I use a KONTRON ETX-P3T board and Platform Builder 5.0. I created an
WinCE 5.0 image which is working except for the speed of its IDE device
(such as Compact Flash Card, Hard Disk etc.). All operations on these
devices take an unusual amount of time. For example writing a 30 MB
file to hard disk takes 5 to 6 minutes.
Any idea what might cause this behaviour? I enclosed the debug output
from the system start below.
In particular the following lines are looking strange to me:

0x801abbe8: OEMIoControl: Unsupported Code 0x101008c - device 0x0101
func 35
0x801abbe8: OEMIoControl: Unsupported Code 0x10100d4 - device 0x0101
func 53
0x801abbe8: OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101
func 49

0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\Prefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\Serial\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\Serial0\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\WaveDev\BusPrefix) returned 2

In all the *.reg files are no values defined unter [...]\BusPrefix so
what is the system looking for in this registry keys?

0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(TCPIP\IPDevice\BusPrefix) returned 2
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix IPD,
index 0, dll tcpstk.dll, context 0x3f8a5c9
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(TCPIP\TCPDevice\BusPrefix) returned 2
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix TCP,
index 0, dll tcpstk.dll, context 0x3f8a5c9


0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JAtapi\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JAtapi\Device0\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JAtapi\Device1\BusPrefix) returned 2
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x00057980
0x80154e08: Loading partition driver mspart.dll hModule=87B5EB5C
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix DSK,
index 2, dll jatapi.dll, context 0x602dd1

etc.

Thanks in advance,
Gunnar





Debug Serial Init

SysInit: GDTBase=820bb0e8 IDTBase=820dcd80 KData=820e5800
Windows CE Kernel for i486 Built on Jun 24 2004 at 18:28:19
g_pPageDir = 820e8000
PCIBIOS:: BIOS Address static map to addr=a00e0000
GetPicRoutingIrqTable: Start
search_pci_bios start
CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00f67f0
bios32_call_offset=1d730 for CE/PC
Return from First BIOS EAX=49435000 EBX=fd540,ECX=ac0 EDX=404
32 PCI BIOS offset located.addr=1d944
32 PCI BIOS Present EDX=20494350,EAX=1 EBX=f0210,ECX=a01
+GetRoutingOption
search_pci_routing
search_pci_routing found entry =a00fded0 CE/PC
GetRoutingOption, found ROM version for Routing table.
GetRoutingOption return SUCCESS .AH=0
canConfiguredIrq with PCI Exclusive Irq Bit (wExClusive) =0
ScanConfigureIrq: BufferSize = 208 @ address 820e03aa
ScanConfigureIrq: for Bus=0 ,Device=30 SlotNumber=0
INTA_LinkValue=60,INTA_IrqBitMap=def8
INTB_LinkValue=61,INTB_IrqBitMap=def8
INTC_LinkValue=62,INTC_IrqBitMap=def8
INTD_LinkValue=63,INTC_IrqBitMap=def8
ScanConfigureIrq: for Bus=1 ,Device=3 SlotNumber=1
INTA_LinkValue=60,INTA_IrqBitMap=def8
INTB_LinkValue=61,INTB_IrqBitMap=def8
INTC_LinkValue=62,INTC_IrqBitMap=def8
INTD_LinkValue=63,INTC_IrqBitMap=def8
ScanConfigureIrq: LinkNumber=96 associated with irq=9
ScanConfigureIrq: for Bus=1 ,Device=4 SlotNumber=2
INTA_LinkValue=61,INTA_IrqBitMap=def8
INTB_LinkValue=62,INTB_IrqBitMap=def8
INTC_LinkValue=63,INTC_IrqBitMap=def8
INTD_LinkValue=60,INTC_IrqBitMap=def8
ScanConfigureIrq: for Bus=1 ,Device=5 SlotNumber=3
INTA_LinkValue=62,INTA_IrqBitMap=def8
INTB_LinkValue=63,INTB_IrqBitMap=def8
INTC_LinkValue=60,INTC_IrqBitMap=def8
INTD_LinkValue=61,INTC_IrqBitMap=def8
ScanConfigureIrq: for Bus=1 ,Device=6 SlotNumber=4
INTA_LinkValue=63,INTA_IrqBitMap=def8
INTB_LinkValue=60,INTB_IrqBitMap=def8
INTC_LinkValue=61,INTC_IrqBitMap=def8
INTD_LinkValue=62,INTC_IrqBitMap=def8
ScanConfigureIrq: for Bus=1 ,Device=7 SlotNumber=5
INTA_LinkValue=60,INTA_IrqBitMap=def8
INTB_LinkValue=61,INTB_IrqBitMap=def8
INTC_LinkValue=62,INTC_IrqBitMap=def8
INTD_LinkValue=63,INTC_IrqBitMap=def8
ScanConfigureIrq: for Bus=1 ,Device=1 SlotNumber=0
INTA_LinkValue=63,INTA_IrqBitMap=def8
INTB_LinkValue=0,INTB_IrqBitMap=def8
INTC_LinkValue=0,INTC_IrqBitMap=def8
INTD_LinkValue=0,INTC_IrqBitMap=def8
ScanConfigureIrq: for Bus=1 ,Device=8 SlotNumber=0
INTA_LinkValue=68,INTA_IrqBitMap=def8
INTB_LinkValue=0,INTB_IrqBitMap=def8
INTC_LinkValue=0,INTC_IrqBitMap=def8
INTD_LinkValue=0,INTC_IrqBitMap=def8
ScanConfigureIrq: LinkNumber=104 associated with irq=7
ScanConfigureIrq: for Bus=0 ,Device=0 SlotNumber=0
INTA_LinkValue=60,INTA_IrqBitMap=def8
INTB_LinkValue=61,INTB_IrqBitMap=def8
INTC_LinkValue=62,INTC_IrqBitMap=def8
INTD_LinkValue=63,INTC_IrqBitMap=def8
ScanConfigureIrq: for Bus=0 ,Device=31 SlotNumber=0
INTA_LinkValue=62,INTA_IrqBitMap=def8
INTB_LinkValue=61,INTB_IrqBitMap=def8
INTC_LinkValue=0,INTC_IrqBitMap=def8
INTD_LinkValue=0,INTC_IrqBitMap=def8
ScanConfigureIrq: for Bus=0 ,Device=29 SlotNumber=0
INTA_LinkValue=60,INTA_IrqBitMap=def8
INTB_LinkValue=63,INTB_IrqBitMap=def8
INTC_LinkValue=62,INTC_IrqBitMap=def8
INTD_LinkValue=6b,INTC_IrqBitMap=def8
ScanConfigureIrq: LinkNumber=96 associated with irq=9
ScanConfigureIrq: LinkNumber=99 associated with irq=11
ScanConfigureIrq: for Bus=0 ,Device=2 SlotNumber=0
INTA_LinkValue=60,INTA_IrqBitMap=def8
INTB_LinkValue=61,INTB_IrqBitMap=def8
INTC_LinkValue=0,INTC_IrqBitMap=def8
INTD_LinkValue=0,INTC_IrqBitMap=def8
ScanConfigureIrq: LinkNumber=96 associated with irq=9
ScanConfigureIrq: for Bus=0 ,Device=1 SlotNumber=0
INTA_LinkValue=60,INTA_IrqBitMap=def8
INTB_LinkValue=61,INTB_IrqBitMap=def8
INTC_LinkValue=0,INTC_IrqBitMap=def8
INTD_LinkValue=0,INTC_IrqBitMap=def8
CEPC Firmware Init
RTC - Status Reg B - 0x02
Setting up Kontron extensions
g_dwCPUFeatures = 0383f9ff
g_nMtrrCnt = 8
MTRR PhysMask0: 0000000ff8000800
MTRR PhysBase0: 0000000000000006
MTRR PhysMask1: 0000000ffff80800
MTRR PhysBase1: 0000000007f80000
MTRR PhysMask2: 0000000000000000
MTRR PhysBase2: 0000000000000000
MTRR PhysMask3: 0000000000000000
MTRR PhysBase3: 0000000000000000
MTRR PhysMask4: 0000000000000000
MTRR PhysBase4: 0000000000000000
MTRR PhysMask5: 0000000000000000
MTRR PhysBase5: 0000000000000000
MTRR PhysMask6: 0000000000000000
MTRR PhysBase6: 0000000000000000
MTRR PhysMask7: 0000000000000000
MTRR PhysBase7: 0000000000000000
PhysMask0: 0000000ff8000800
PhysMask1: 0000000ffff80800
PhysMask2: 0000000000000000
PhysMask3: 0000000000000000
PhysMask4: 0000000000000000
PhysMask5: 0000000000000000
PhysMask6: 0000000000000000
PhysMask7: 0000000000000000
g_nMtrrInuse = 2
Looking for rom chain
Rom chain NOT found
Firmware Init Done.
Error Reporting Memory Reserved, dump size = 00020000
Booting Windows CE version 5.00 for (x86)
&pTOC = 802279f0, pTOC = 820b7ff4, pTOC->ulRamFree = 820e8000, MemForPT
= 00004000

Old or invalid version stamp in kernel structures - starting clean!
Configuring: Primary pages: 23533, Secondary pages: 187, Filesystem
pages = 11860

Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 820ed000, extension: 00006000, length: 05bed000
[1] : start: 80100000, extension: 00001000, length: 000bb000
X86Init done, OEMAddressTable = 80237138.
Windows CE KernelInit
Updated eptr->e32_vsize to = 00076000
Scheduling the first thread.
0x801bb030: KernelInit2: pCurThread=801bb030 hCurThread=001bb1de
hCurProc=001bb002, KernelInit = 8025a250
0x801bb030: first = 01c90000, last = 02000000, SharedDllBase = 022e0000
0x801bb030: Did not find emulation code for x86... using floating point
hardware.
0x801abbe8: CertMod.dll not found, using old OEM Trust Model
0x801abbe8: FileSystem Starting - starting with clean file system
0x801abbe8: FS: initializing ROM/RAM file system
0x801abbe8: SC_CreateAPIHandle: pvData == NULL
0x801abbe8: FS: Registering file system ROM, index 2, flags 0x00000031
0x801abbe8: FS: Mount complete (ROM, index 2, flags 0x00000031)
0x801abbe8: EventLog:: EventLogInit() called
0x801abbe8: OEMIoControl: Unsupported Code 0x101008c - device 0x0101
func 35
0x801abbe8: FSVOL: Opening existing volume
0x801abbe8: FSVOL: Volume heap already initialized
0x801abbe8: FSREG: Mounted ROM portion of boot registry
0x801abbe8: FSVOL: Creating clean virtual volume
0x801abbe8: FSVOL: Initializing volume heap
0x801abbe8: FSREG: Mounted RAM portion of boot registry
0x801abbe8: PCIReg(key: , device: 0/0/0)
0x801abbe8: FS: Creating signal event SYSTEM/DevMgrApiSetReady
0x801abbe8: FS: Creating signal event SYSTEM/PowerManagerReady
0x801abbe8: FS: Creating signal event SYSTEM/GweApiSetReady
0x801abbe8: FILESYS: NOT starting device manager to reach system hive.
0x801abbe8: OEMIoControl: Unsupported Code 0x10100d4 - device 0x0101
func 53
0x801abbe8: FSREG: Unable to read value "SystemHiveInitialSize" under
HKEY_LOCAL_MACHINE\init\BootVars
0x801abbe8: FSVOL: Opening existing volume
0x801abbe8: FSVOL: Volume heap already initialized
0x801abbe8: FSREG: Mounted ROM portion of system hive
0x801abbe8: FILESYS: Loading system hive from Documents and
Settings\Registry.hv.
0x801abbe8: OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101
func 49
0x801abbe8: FSREG: Mounting clean system hive
0x801abbe8: BuildPath: Documents and Settings
0x801abbe8: FSVOL: Creating new volume (size=49152 bytes)
0x801abbe8: FSVOL: Initializing volume heap
0x801abbe8: FSREG: Taking down boot registry. Any open keys will be
invalid.
0x801abbe8: FILESYS: Registry in place.
0x801abbe8: OEMIoControl: Unsupported Code 0x10100c4 - device 0x0101
func 49
0x801abbe8: FSREG: Unable to read value "RegistryFlags" under
HKEY_LOCAL_MACHINE\init\BootVars
0x801abbe8: FSREG: Unable to read value "NoDefaultUser" under
HKEY_LOCAL_MACHINE\init\BootVars
0x801abbe8: FSREG: Logging in default user.
0x801abbe8: SetCurrentUser: Logging out (nobody), logging in default
0x801abbe8: BuildPath: Documents and Settings
0x801abbe8: BuildPath: Documents and Settings\default
0x801abbe8: BuildPath: Documents and Settings\default\default
0x801abbe8: FSREG: Mounting ROM portion of user hive
0x801abbe8: FSVOL: Opening existing volume
0x801abbe8: FSVOL: Volume heap already initialized
0x801abbe8: Mounting user hive from Documents and
Settings\default\default\user.hv
0x801abbe8: FSREG: Mounting clean user hive
0x801abbe8: FSVOL: Creating new volume (size=49152 bytes)
0x801abbe8: FSVOL: Initializing volume heap
0x801abbe8: OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101
func 52
0x801abbe8: OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101
func 62
0x801abbe8: FSREG: Unable to read value "RegistryFlags" under
HKEY_LOCAL_MACHINE\init\BootVars
0x801abbe8: EventLog:: EventLogStart(szDestinationFolder=\windows\)
called
0x801abbe8: FSREG: Unable to read value "DBFlags" under
HKEY_LOCAL_MACHINE\init\BootVars
0x801abbe8: InitSharedHeap: 48300000 10000 c
0x801abbe8: InitSharedHeap: return 48300060
0x801abbe8: FS: Registering file system StoreMgr, index 3, flags
0x00000001
0x801aeb30: EventLog: EventLogWorkerThread() initiated
0x801aeb30: EventLog: System supports UTF8. EventLog will write log
files in this format.
0x801aeb30: EventLog: Begin loading up format and outputter extensions
0x801aeb30: EventLog: Done loading up format and outputter extensions.
0x801aeb30: EventLog: About to initialize eventLogger for <System>
0x801aeb30: EventLog: Initialized file log \windows\SystemLog.xml,
maxLog size = 32768
0x801aeb30: EventLog: EventLog <<System>> successfully initialized.
0x801aeb30: EventLog: Printing out initial EventLog startup messages to
EventLog log
0x801abbe8:
Initializing Database
0x801abbe8: DB:Validation: Name already exists DB_notify_events
0x801abbe8: DB:CeCreateDatabase failed
0x801abbe8: Filesystem initialized!
0x801abbe8: FILESYS: Waiting for kernel to be ready to launch apps
0x801ab800: InitMUI: DISABLED (-2145044240)
0x801abbe8: FS: Creating signal event SYSTEM/DevMgrApiSetReady
0x801abbe8: FS: Creating signal event SYSTEM/PowerManagerReady
0x801abbe8: FS: Creating signal event SYSTEM/GweApiSetReady
0x801abbe8: FS: Creating signal event system/events/notify/APIReady
0x801abbe8: FS: Creating signal event SYSTEM/ShellAPIReady
0x801abbe8: FILESYS: Launching apps
0x801abbe8: FILESYS: Launching device.exe
0x8014abcc: InitSharedHeap: 48300000 0 c
0x8014abcc: InitSharedHeap: return 48300060
0x8014abcc: *** DLL_PROCESS_ATTACH - Current Process: 0x42, ID:
0x80133002 ***
0x8014abcc: +InitDeviceFileSystems
0x8014abcc: FS: Registering file system $device, index 4, flags
0x00000001
0x8014abcc: FS: Registering file system $bus, index 5, flags 0x00000001
0x8014abcc: -InitDeviceFileSystems: status is 1
0x8014abcc: Ceddk!CalibrateStallCounter: Enter
0x8014abcc: Ceddk!CalibrateStallCounter: Could not find stall counter
0x8014abcc: Ceddk!BeginCalibration: min(1194) max(1326)
0x8014abcc: Ceddk!BeginCalibration: Elapsed is 1235
0x8014abcc: Ceddk!BeginCalibration: Delay is 53
0x8014abcc: DEVICE!DevloadInit
0x8014abcc: DEVICE!InitDevices: Root Key is Drivers\BuiltIn.
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\Prefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\Serial\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\Serial0\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\WaveDev\BusPrefix) returned 2
0x8014abcc: ICHAC97: Error, can't find AC'97 Controller
on ICH
0x8014abcc: ICHAC97: No ICH Device found!!
0x8014abcc: [ERROR] "PDD_AudioInitialize() FAILED"
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x00035880
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix WAV,
index 1, dll waveich4.dll, context 0x602e654
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JInitIG\BusPrefix) returned 2
0x8014abcc: JInitIG: Resolution 800 600
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JInitBM\BusPrefix) returned 2
0x8014abcc: JInitBM: Enabling PCI Busmastering
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JInitUSB\BusPrefix) returned 2
0x8014abcc: JInitUSB: USB BIOS Hand-Off
0x8014abcc: JInitUSB: USB BIOS Hand-Off UHCI
0x8014abcc: JInitUSB: USB BIOS Hand-Off UHCI
0x8014abcc: JInitUSB: USB BIOS Hand-Off EHCI
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\NDIS\BusPrefix) returned 2
0x8014abcc: CXPORT:dllentry ProcessAttach
0x8014abcc: CXPORT:+GetRegSettings
0x8014abcc: CXPORT:-GetRegSettings
0x8014abcc: CXPORT:InitBlockPool - Pool(16), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(32), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(48), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(64), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(96), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(128), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(256), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(356), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(476), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(512), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(1024), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(1600), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(2048), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(4096), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(8192), limit 20000 bytes
0x8014abcc: CXPORT:InitBlockPool - Pool(-1), limit 20000 bytes
0x8014abcc: NDIS: RebindAdaptersOnResume = 0
0x8014abcc: NDIS: PcmciaNeedsMapToScrap = 0
0x8014abcc: ## BRIDGE ## DriverEntry
0x8014abcc: ## BRIDGE ## BrdgReadRegDWord: DisableSTA failed.
0x8014abcc: ## BRIDGE ## BrdgReadRegDWord: MaxTableMemory failed.
0x8014abcc: ## BRIDGE ## Failed to read MaxTableMemory value: c0000001
0x8014abcc: ## BRIDGE ## Using DEFAULT maximum memory of 102400
0x8014abcc: ## BRIDGE ## Forwarding table cap set at 5120 entries (100K
of memory)
0x8014abcc: ## LOOKASIDE INITIALIZE ## [20] bytes, depth [0]
0x8014abcc: ## BRIDGE ## BrdgReadRegDWord: Priority256 failed.
0x8014abcc: MBRIDGE:: Worker thread priority set to [116]
0x87c8ac50: ## BRIDGE ## Spinning up a thread on processor 0
0x8014abcc: ## LOOKASIDE INITIALIZE ## [1514] bytes, depth [0]
0x8014abcc: ## LOOKASIDE INITIALIZE ## [28] bytes, depth [0]
0x8014abcc: ## BRIDGE ## BrdgReadRegDWord: MaxBufferMemory failed.
0x8014abcc: ## BRIDGE ## Failed to read MaxBufferMemory value: c0000001
0x8014abcc: ## BRIDGE ## Using DEFAULT maximum memory of 204800
0x8014abcc: ## BRIDGE ## max memory used = [204800]bytes.
0x8014abcc: ## BRIDGE ## BrdgReadRegDWord: SafetyMargin failed.
0x8014abcc: ## BRIDGE ## Failed to read SafetyMargin value: c0000001
0x8014abcc: ## BRIDGE ## Using DEFAULT safety margin of 10%
0x8014abcc: ## BRIDGE ## SafetyMargin = [10]%
0x8014abcc: ## BRIDGE ## BrdgReadRegDWord: FanOut failed.
0x8014abcc: ## BRIDGE ## Max memory usage of 204800 == 16 copy packets,
512 wrapper packets, 24224 copy-buffer space, 1/51 safe
ty packets
0x8014abcc: MBRIDGE:: Max mem[204800]:: FanOut[32]:: PerCopy
consumption [12686]:: Copy[16] - Wrapper[512] - Safety[1][51]0x801
4abcc: ==>NdisInitializeWrapper
0x8014abcc: <==NdisInitializeWrapper
0x8014abcc: ==>NdisIMRegisterLayeredMiniport: NdisWrapperHandle
00038F40
0x8014abcc: ==>ndisRegisterMiniportDriver: NdisWrapperHandle 00038F40
0x8014abcc: <==ndisRegisterMiniportDriver: MiniBlock 000310F0
0x8014abcc: <==NdisIMRegisterLayeredMiniport: MiniBlock 000310F0,
Status 0
0x8014abcc: ## BRIDGE ## Failed query size for value "ws": 03bb8af0
0x8014abcc: ## BRIDGE ## BrdgReadRegDWord: BridgeIndex failed.
0x8014abcc: ## BRIDGE ## RegisterDevice() successful..
0x8014abcc: NDIS:: CE_DeleteBusFriendlyNames() failed deleting
[HKLM\Comm\BusFriendlyNames]
0x8014abcc: DeviceFolder::LoadDevice!Enumerate Found deprecated load
instructions at (Drivers\BuiltIn\AFD). Driver cannot be un
loaded.
0x8014abcc: Can't load library ppp.dll
0x8014abcc: !AFD:AfdInitialize: Can't open Registry key Comm\AFD --
creating 'Stacks' entry
0x8014abcc: Read OrigName
0x8014abcc: TCPIP: dllentry()
0x8014abcc: TCPIP.Register()
0x8014abcc: *** New TcpStack ***
0x8014abcc: +IPInit()
0x8014abcc: +IPGetConfig
0x8014abcc: -IPGetConfig: Ret: 0x111DB0
0x8014abcc: Dhcp: dllentry() -2016851928
0x8014abcc: +DhcpRegister:
0x8014abcc: -DhcpRegister: Ret = 379c0
0x8014abcc: IPInit: registered w/ DHCP
0x8014abcc: NAT: DLL_PROCESS_ATTACH, hInst:0x87C60CCC
0x8014abcc: IPInit: Unable to Load IPSEC
0x8014abcc: IGMPDelInclList: AddrPtr=112890 NumDelSources=0
DelSourceList=0
0x8014abcc: -IPInit [SUCCESS]
0x8014abcc: +TCPGetConfigInfo
0x8014abcc: -TCPGetConfigInfo
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(TCPIP\IPDevice\BusPrefix) returned 2
0x8014abcc: +IPD_Init(602de18)
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(TCPIP\TCPDevice\BusPrefix) returned 2
0x8014abcc: +TCP_Init(602de18)
0x8014abcc: TCPIP.About to register
0x8014abcc: TCPIP6: dllmain()
0x8014abcc: TCPIP6:Register()
0x8014abcc: TCPIP6:DriverLoad()
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: FSREG: Invalid HKEY 0x00000000
0x8014abcc: CreateInterface(IF 1/00118A20):
\DEVICE\TCPIP6_{6bd113cc-5ec2-7638-b953-0b889da72014} -> 0
0x8014abcc: CreateNTE(IF 1/00118A20, Addr fe80::1) -> NTE 00118680
0x8014abcc: CreateNTE(IF 1/00118A20, Addr ::1) -> NTE 00118DB0
0x8014abcc: TCPIP.Register()
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(TCPIP\IPDevice\BusPrefix) returned 2
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix IPD,
index 0, dll tcpstk.dll, context 0x3f8a5c9
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(TCPIP\TCPDevice\BusPrefix) returned 2
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix TCP,
index 0, dll tcpstk.dll, context 0x3f8a5c9
0x8014abcc: TCPIP.About to register
0x8014abcc: CreateInterface(IF 2/00118FF0):
\DEVICE\TCPIP6_{48fce3fc-ec30-e50e-f1a7-71172aeee3ae} -> 0
0x8014abcc: CreateInterface(IF 3/00119250):
\DEVICE\TCPIP6_{a995346e-9f3e-2edb-47d1-9cc7ba01cd73} -> 0
0x8014abcc: CreateInterface(IF 4/00119450):
\DEVICE\TCPIP6_{bade68b3-9fc9-5e9e-6285-d4f8e3e476dd} -> 0
0x8014abcc: MIPV6: Could not open registry key... skipping
0x87bd4e00: LanPnPEvent(00000000) - binds complete
0x8014abcc: LanInit: registered with NDIS 5.
0x8014abcc: *InitTCB: SetIdleTimerReset
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(TCPIP6\IPDevice\BusPrefix) returned 2
0x8014abcc: +IP6_Init(602de24)
0x8014abcc: TCPIP6:About to register
0x8014abcc: !AFD: Unable to load library 'irdastk.dll'
0x8014abcc: !AFD: Unable to load library 'btd.dll'
0x87bd7dd0: SetInterfaceLinkStatus(IF 3) -> connected
0x8014abcc: RdrMain: DLL_PROCESS_ATTACH, hInst:0x87BBE8FC
0x87c88b28: *v6TCBTimeout: ClearIdleTimerReset
0x87c88b28: TCBTimeout: setting v6TCBTimerOn to 0
0x87c88b28: TCBTimeout: NOT Restarting v6TCBTimer
0x8014abcc: +RDR:Redir helper func: Ctxt:0x0, OpCode:1
0x8014abcc: +RDR:InitRedir
0x87bd7dd0: ReconnectInterface(IF 3)
0x87bd7dd0: SetInterfaceLinkStatus(IF 2) -> connected
0x87bd7dd0: ReconnectInterface(IF 2)
0x87bd7dd0: TunnelAddAddress(127.0.0.1) IF 00119250 connected?
0x87bd7dd0: TunnelAddAddress(127.0.0.1) IF 00118FF0 connected?
0x8014abcc: InitRedirConfig:
0x8014abcc: ClearTxtPwd: FALSE
0x8014abcc: ServerTimeoutMs: 10000
0x8014abcc: FindCacheMaxSize: 8192
0x8014abcc: ResourceExpiryInt: 600
0x8014abcc: RecvBufSize: 9000
0x8014abcc: RecvThreadPrio256: 251
0x8014abcc: RegisterFSRoot: TRUE
0x8014abcc: SECUR32: Loading package DLL: 'schannel.dll'.
0x8014abcc: SECUR32: Loading package DLL: 'ntlmssp.dll'.
0x8014abcc: SECUR32: Loading package DLL: 'kerberos.dll'.
0x8014abcc: SECUR32: Loading package DLL: 'spnego.dll'.
0x8014abcc: SECUR32: Package [1] loaded -- 'Microsoft Unified Security
Protocol Provider'
0x8014abcc: SECUR32: Package [2] loaded -- 'Microsoft TLS 1.0'
0x8014abcc: SECUR32: Package [3] loaded -- 'Microsoft SSL 3.0'
0x8014abcc: SECUR32: Package [4] loaded -- 'Microsoft SSL 2.0'
0x8014abcc: SECUR32: Package [5] loaded -- 'NTLM'
0x8014abcc: SECUR32: Package [6] loaded -- 'Kerberos'
0x8014abcc: SECUR32: Package [7] loaded -- 'Negotiate'
0x8014abcc: SECUR32: Locating package 'Negotiate' ...0x8014abcc: found
(0x0004AA40).
0x8014abcc: Found Kerberos package
0x8014abcc: +RDR:InitNetBIOS
0x8014abcc: NETBIOS: NB_NET_NOTIFY for callback at address
0x37f4a500x8014abcc: Browser initialized
0x8014abcc: +RDR:FSAPIInit
0x8014abcc: FS: Registering file system Network, index 1, flags
0x00000000
0x8014abcc: -RDR:FSAPIInit
0x8014abcc: +RDR_Init
0x8014abcc: -RDR:InitRedir, initialization successful
0x8014abcc: IPNat Register
0x8014abcc: +NAT_Init
0x8014abcc: ## LOOKASIDE INITIALIZE ## [280] bytes, depth [20]
0x87b82938: IPDispatchDeviceControl returned Status 103
0x8014abcc: ## LOOKASIDE INITIALIZE ## [56] bytes, depth [10]
0x8014abcc: ## LOOKASIDE INITIALIZE ## [48] bytes, depth [10]
0x8014abcc: ## LOOKASIDE INITIALIZE ## [64] bytes, depth [10]
0x8014abcc: NatLoadEditors: Couldn't open key Comm\IPNat
0x8014abcc: NAT Reserved Port Range 1025..3000
0x8014abcc: IPNat initialization successful
0x8014abcc: Ws2Instl dllentry() -2017943792
0x8014abcc: Ws2Instl:IsStackInstalled - LoadLibrary(irdastk) failed 126
0x8014abcc: Ws2Instl:IsStackInstalled - LoadLibrary(btd) failed 126
0x8014abcc: Dhcp: dllentry() -2017995600
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(TCPIP6\DHCPV6L\BusPrefix) returned 2
0x8014abcc: +DP6_Init(602de04)
0x8014abcc: *TCPIP:ReadyToGo
0x8014abcc: +ARPInit()
0x8014abcc: -ARPInit [0]
0x8014abcc: TCPIP6:ReadyToGo
0x8014abcc: !AFD: Unable to load library 'irdastk.dll'
0x8014abcc: !AFD: Unable to load library 'btd.dll'
0x8014abcc: !AFD: Unable to GetProcAddress of ReadyToGo in
'Netbios'
0x8014abcc: !AFD: Unable to GetProcAddress of ReadyToGo in
'Redir'
0x8014abcc: !AFD: Unable to GetProcAddress of ReadyToGo in
'Dhcp'
0x8014abcc: !AFD: Unable to GetProcAddress of ReadyToGo in
'IPNat'
0x8014abcc: !AFD: Unable to GetProcAddress of ReadyToGo in
'Ws2Instl'
0x8014abcc: AFD: Initialization Complete
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JAtapi\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JAtapi\Device0\BusPrefix) returned 2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JAtapi\Device1\BusPrefix) returned 2
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x00057980
0x80154e08: Loading partition driver mspart.dll hModule=87B5EB5C
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix DSK,
index 2, dll jatapi.dll, context 0x602dd10
0x80154e08: Driver mspart.dll loaded
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JAtapi\Device2\BusPrefix) returned 2
0x80154e08: Opened the store hStore=000B2B90
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x00057bf0
0x80154e08: NumSec=125440 BytesPerSec=512 FreeSec=256
BiggestCreatable=256
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix DSK,
index 2, dll jatapi.dll, context 0x602dd10
0x80154e08: Partition OL3050E_CF NumSectors=125152
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\JAtapi\Device3\BusPrefix) returned 2
0x80154e08: MSPART!PD_OpenPartition: dwStoreId=000B2B90,
PartName=OL3050E_CF
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x00057e60
0x80154e08: FSD_MountDisk: mounting volumes for hDsk=000B4050
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix DSK,
index 2, dll jatapi.dll, context 0x602dd10
0x80154e08: FATFS!MountDisk: BPB_HiddenSectors(32) != 0
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\ipv6hlp\BusPrefix) returned 2
0x80154e08: FATFS!OpenVolume: access time updates disabled
0x8014abcc: IH6:: V6H_Init()..
0x80154e08: FATFS!OpenVolume: event logging enabled
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Prefix) returned 2
0x80154e08: FATFS!OpenVolume: automatic scanning disabled
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\BusPrefix) returned 2
0x80154e08: FATFS!OpenVolume: write verify disabled
0x8014abcc: Warning: No Match template is found for following PCI
Device
0x80154e08: FATFS!OpenVolume: extra FAT on format disabled
0x8014abcc:
-------------------------------------------------------------------------------
0x80154e08: FATFS!OpenVolume: force write through enabled
0x8014abcc: Bus/Device/Function = 0/0/0, Host / PCI Bridge
0x80154e08: FATFS!OpenVolume: Codepage = 1
0x8014abcc: VendorID = 0x8086, DeviceID = 0x1130, Command = 0x0106,
Status = 0x2090
0x80154e08: FATFS!OpenVolume: Number of path cache entries = 50
0x8014abcc: RevisionID = 0x04, ProgIf = 0x00, SubClass = 0x00,
BaseClass = 0x06
0x80154e08: FATFS!InitVolume: driver disagrees with BPB (BPB
CHS=488:8:32)
0x8014abcc: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType =
0x00, BIST = 0x00
0x80154e08: CreateCache: Successful. Cache Size: 61 KB, Start: 1, End:
244.
0x8014abcc: BaseAddresses:
0x80154e08: CreateCache: Successful. Cache Size: 122 KB, Start: 245,
End: 125151.
0x8014abcc: 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000
0x80154e08: FATFS!InitVolume: FAT version: 16
0x8014abcc: CIS = 0x00000000, SubVendorID = 0xFFFF, SubSystemID =
0xFFFF
0x80154e08: FATFS!InitVolume: Cluster Size (Sectors): 4
0x8014abcc: ROMBaseAddress = 0x00000000
0x80154e08: FATFS!InitVolume: TFAT enabled: FALSE
0x8014abcc: InterruptLine = 0x00, InterruptPin = 0x00, MinGrant =
0x00, MaxLatency = 0x00
0x80154e08: FS: Registering file system Storage Card, index 0, flags
0x00000002
0x8014abcc:
-------------------------------------------------------------------------------
0x80154e08: FS: Mount complete (Storage Card, index 0, flags
0x00000002)
0x8014abcc: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key
was found for placed device 0/0/0.
0x8014abcc: PCIBUS!PCICfgCheckBARs: Problems can result if the
device is being used while configuring PCIbus.
0x8014abcc: Warning: No Match template is found for following PCI
Device
0x8014abcc:
-------------------------------------------------------------------------------
0x8014abcc: Bus/Device/Function = 0/2/0, VGA Compatible Display Adapter
0x8014abcc: VendorID = 0x8086, DeviceID = 0x1132, Command = 0x0007,
Status = 0x02B0
0x8014abcc: RevisionID = 0x04, ProgIf = 0x00, SubClass = 0x00,
BaseClass = 0x03
0x8014abcc: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType =
0x00, BIST = 0x00
0x8014abcc: BaseAddresses:
0x8014abcc: 0xF8000008 0xF4000000 0x00000000 0x00000000
0x00000000 0x00000000
0x8014abcc: CIS = 0x00000000, SubVendorID = 0x8086, SubSystemID =
0x0815
0x8014abcc: ROMBaseAddress = 0x00000000
0x8014abcc: InterruptLine = 0x09, InterruptPin = 0x01, MinGrant =
0x00, MaxLatency = 0x00
0x8014abcc:
-------------------------------------------------------------------------------
0x8014abcc: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key
was found for placed device 0/2/0.
0x8014abcc: PCIBUS!PCICfgCheckBARs: Problems can result if the
device is being used while configuring PCIbus.
0x8014abcc: Warning: No Match template is found for following PCI
Device
0x8014abcc:
-------------------------------------------------------------------------------
0x8014abcc: Bus/Device/Function = 1/3/0, Other Network Controller
0x8014abcc: VendorID = 0x1853, DeviceID = 0x2400, Command = 0x0006,
Status = 0x0200
0x8014abcc: RevisionID = 0x00, ProgIf = 0x00, SubClass = 0x80,
BaseClass = 0x02
0x8014abcc: CacheLineSize = 0x00, LatencyTimer = 0x84, HeaderType =
0x00, BIST = 0x00
0x8014abcc: BaseAddresses:
0x8014abcc: 0xF4101000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000
0x8014abcc: CIS = 0x00000000, SubVendorID = 0x0000, SubSystemID =
0x0000
0x8014abcc: ROMBaseAddress = 0x00000000
0x8014abcc: InterruptLine = 0x09, InterruptPin = 0x01, MinGrant =
0x10, MaxLatency = 0x08
0x8014abcc:
-------------------------------------------------------------------------------
0x8014abcc: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key
was found for placed device 1/3/0.
0x8014abcc: PCIBUS!PCICfgCheckBARs: Problems can result if the
device is being used while configuring PCIbus.
0x8014abcc: Warning: No Match template is found for following PCI
Device
0x8014abcc:
-------------------------------------------------------------------------------
0x8014abcc: Bus/Device/Function = 0/31/0, PCI / ISA Bridge
0x8014abcc: VendorID = 0x8086, DeviceID = 0x24C0, Command = 0x000F,
Status = 0x0280
0x8014abcc: RevisionID = 0x02, ProgIf = 0x00, SubClass = 0x01,
BaseClass = 0x06
0x8014abcc: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType =
0x80, BIST = 0x00
0x8014abcc: BaseAddresses:
0x8014abcc: 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000
0x8014abcc: CIS = 0x00000000, SubVendorID = 0x0000, SubSystemID =
0x0000
0x8014abcc: ROMBaseAddress = 0x00000000
0x8014abcc: InterruptLine = 0x00, InterruptPin = 0x00, MinGrant =
0x00, MaxLatency = 0x00
0x8014abcc:
-------------------------------------------------------------------------------
0x8014abcc: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key
was found for placed device 0/31/0.
0x8014abcc: PCIBUS!PCICfgCheckBARs: Problems can result if the
device is being used while configuring PCIbus.
0x8014abcc: ATAPI DLL_PROCESS_ATTACH
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(0)
0x8014abcc: ATAPI:PCIConfig!ConfigRsrc+(Bus 0, Device 31, Function 1)
0x8014abcc: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/1): Offset 0x10, Type
I/O, Size 0x8
0x8014abcc: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/1): Offset 0x14, Type
I/O, Size 0x4
0x8014abcc: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/1): Offset 0x18, Type
I/O, Size 0x8
0x8014abcc: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/1): Offset 0x1c, Type
I/O, Size 0x4
0x8014abcc: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/1): Offset 0x20, Type
I/O, Size 0x10
0x8014abcc: ATAPI:PCIConfig!ConfigRsrc: BAR(0/31/1): Offset 0x24, Type
Memory, Size 0x400
0x8014abcc: ATAPI:PCIConfig!ConfigRsrc-
0x8014abcc: Warning: No Match template is found for following PCI
Device
0x8014abcc:
-------------------------------------------------------------------------------
0x8014abcc: Bus/Device/Function = 0/31/3, Unknown Device Type
0x8014abcc: VendorID = 0x8086, DeviceID = 0x24C3, Command = 0x0001,
Status = 0x0280
0x8014abcc: RevisionID = 0x02, ProgIf = 0x00, SubClass = 0x05,
BaseClass = 0x0C
0x8014abcc: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType =
0x00, BIST = 0x00
0x8014abcc: BaseAddresses:
0x8014abcc: 0x00000000 0x00000000 0x00000000 0x00000000
0x00002401 0x00000000
0x8014abcc: CIS = 0x00000000, SubVendorID = 0x1059, SubSystemID =
0x4011
0x8014abcc: ROMBaseAddress = 0x00000000
0x8014abcc: InterruptLine = 0xFF, InterruptPin = 0x02, MinGrant =
0x00, MaxLatency = 0x00
0x8014abcc:
-------------------------------------------------------------------------------
0x8014abcc: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key
was found for placed device 0/31/3.
0x8014abcc: PCIBUS!PCICfgCheckBARs: Problems can result if the
device is being used while configuring PCIbus.
0x8014abcc: PCIBUS!PCICfgAllocMemSpace: Failed to place Device
resource: Bus 0, Device 2, Function 0
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(1)
0x8014abcc: PCIBUS!PCICfgAllocIoSpace: Failed to place Bridge resource:
Bus 0, Device 30, Function 0
0x8014abcc: PCIBUS!PCICfgAllocIoSpace: Failed to place Device resource:
Bus 0, Device 29, Function 0
0x8014abcc: PCIBUS!PCICfgAllocIoSpace: Failed to place Device resource:
Bus 0, Device 29, Function 1
0x8014abcc: PCIBUS!PCICfgAllocIoSpace: Failed to place Device resource:
Bus 0, Device 31, Function 3
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(1)
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(1)
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(1)
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(1)
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(1)
0x8014abcc: ATAPI DLL_PROCESS_DETACH
0x8014abcc:
PCIBUS::OpenNonExistInstanceKey(Drivers\BuiltIn\PCI\Instance\UHCI1)
returned open exist.continue search
0x8014abcc: ATAPI DLL_PROCESS_ATTACH
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(2)
0x8014abcc: ATAPI:PCIConfig!ConfigSize+(Bus 0, Device 31, Function 1)
0x8014abcc: ATAPI:PCIConfig!ConfigSize-
0x8014abcc: ATAPI DLL_PROCESS_DETACH
0x8014abcc: ATAPI DLL_PROCESS_ATTACH
0x8014abcc: ATAPI:PCIConfig!DeviceConfig+(3)
0x8014abcc: ATAPI DLL_PROCESS_DETACH
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\UHCI2\BusPrefix) returned
2
0x8014abcc: HCD driver DLL attach
0x8014abcc: HCD!HCD_Init
0x8014abcc: UHCD: Read config from registry: Base Address: 0x1C00,
Length: 0x20, I/O Port: YES, SysIntr: 0x12, Interface Type:
5, Bus Number: 0
0x8014abcc: UHCD: ioPhysicalBase 0x1C00, IoSpace 0x1
0x8014abcc: UHCD: ioPortBase 0x1C00, portBase 0x1C00
0x8014abcc: Updated eptr->e32_vsize to = 00002000
0x8014abcc: UHCD: Installed ISR handler, Dll = 'giisr.dll', Handler =
'ISRHandler', Irq = 11
0x8014abcc: DMA buffer passed in from PDD
0x8014abcc: CPhysMem Total Alloc Region PhysAddr = 0x04F47000,
VirtAddr = 0x00320000, size = 65536
0x8014abcc: CPhysMem Special Alloc Region PhysAddr = 0x04F47000,
VirtAddr = 0x00320000, size = 4096
0x8014abcc: CPhysMem HighPri Alloc Region PhysAddr = 0x04F48000,
VirtAddr = 0x00321000, size = 16384
0x8014abcc: CPhysMem Normal Alloc Region PhysAddr = 0x04F4C000,
VirtAddr = 0x00325000, size = 45056
0x8014abcc: +CHW::CHW base=0x1c00, intr=0x12
0x8014abcc: +CUhcd::Initialize. Entry
0x8014abcc: +CDeviceGlobal::Initialize
0x8014abcc: USBD: DLL attach
0x8014abcc: +USBD:HcdAttach, hcd: 0x5B130
0x8014abcc: -CDevice::Initialize, success!
0x8014abcc: +CHW::Initialize
0x8014abcc: !!!Warning!!! Setting resume/suspend/reset bits of USBCMD
0x8014abcc: -CHW::Initialize, success!
0x8014abcc: +CUHCIFrame::Initialize
0x8014abcc: -CUHCIFrame::Initialize. Success!
0x8014abcc: +CHW::EnterOperationalState
0x8014abcc: -CHW::EnterOperationalState
0x8014abcc: -CUhcd::Initialize. Success!!
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\UHCI1\BusPrefix) returned
2
0x8014abcc: HCD!HCD_Init
0x8014abcc: UHCD: Read config from registry: Base Address: 0x1800,
Length: 0x20, I/O Port: YES, SysIntr: 0x10, Interface Type:
5, Bus Number: 0
0x8014abcc: UHCD: ioPhysicalBase 0x1800, IoSpace 0x1
0x8014abcc: UHCD: ioPortBase 0x1800, portBase 0x1800
0x8014abcc: UHCD: Installed ISR handler, Dll = 'giisr.dll', Handler =
'ISRHandler', Irq = 9
0x8014abcc: DMA buffer passed in from PDD
0x8014abcc: CPhysMem Total Alloc Region PhysAddr = 0x04F57000,
VirtAddr = 0x00360000, size = 65536
0x8014abcc: CPhysMem Special Alloc Region PhysAddr = 0x04F57000,
VirtAddr = 0x00360000, size = 4096
0x87b00ddc: !!!Warning!!! Setting resume/suspend/reset bits of USBCMD
0x8014abcc: CPhysMem HighPri Alloc Region PhysAddr = 0x04F58000,
VirtAddr = 0x00361000, size = 16384
0x8014abcc: CPhysMem Normal Alloc Region PhysAddr = 0x04F5C000,
VirtAddr = 0x00365000, size = 45056
0x8014abcc: +CHW::CHW base=0x1800, intr=0x10
0x8014abcc: +CUhcd::Initialize. Entry
0x8014abcc: +CDeviceGlobal::Initialize
0x8014abcc: +USBD:HcdAttach, hcd: 0x5CA50
0x8014abcc: -CDevice::Initialize, success!
0x8014abcc: +CHW::Initialize
0x8014abcc: !!!Warning!!! Setting resume/suspend/reset bits of USBCMD
0x8014abcc: -CHW::Initialize, success!
0x8014abcc: +CUHCIFrame::Initialize
0x8014abcc: -CUHCIFrame::Initialize. Success!
0x8014abcc: +CHW::EnterOperationalState
0x8014abcc: -CHW::EnterOperationalState
0x8014abcc: -CUhcd::Initialize. Success!!
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\ALI14531\BusPrefix)
returned 2
0x8014abcc: ATAPI DLL_PROCESS_ATTACH
0x8014abcc: Atapi!DumpRegKey> Drivers\Active\08
0x8014abcc: Hnd = 0005B560
0x8014abcc: Name = IDE2:
0x8014abcc: Key = Drivers\BuiltIn\PCI\Instance\ALI14531
0x8014abcc: BusParent = 00057CE0
0x8014abcc: InterfaceType = 00000005
0x8014abcc: BusName = PCI_0_31_1
0x8014abcc: Atapi!DumpRegKey> Drivers\BuiltIn\PCI\Instance\ALI14531
0x8014abcc: IoLen :
0x8014abcc: 8
0x8014abcc: 4
0x8014abcc: 8
0x8014abcc: 4
0x8014abcc: 10
0x8014abcc: IoBase :
0x87af9d6c: !!!Warning!!! Setting resume/suspend/reset bits of USBCMD
0x8014abcc: a010
0x8014abcc: a020
0x8014abcc: a018
0x8014abcc: a024
0x8014abcc: a000
0x8014abcc: MemLen = 00000400
0x8014abcc: MemBase = 80000000
0x8014abcc: FunctionNumber = 00000001
0x8014abcc: DeviceNumber = 0000001F
0x8014abcc: BusNumber = 00000000
0x8014abcc: InterfaceType = 00000005
0x8014abcc: SubSystemID = 00004011
0x8014abcc: SubVendorID = 00001059
0x8014abcc: RevisionID = 00000002
0x8014abcc: DeviceID = 000024CB
0x8014abcc: VendorID = 00008086
0x8014abcc: ProgIF = 0000008A
0x8014abcc: RegisterStride = 00000001
0x8014abcc: StatusPollCyclePause = 00000005
0x8014abcc: StatusPollsPerCycle = 00000020
0x87b6e800: IPv6Hlp:: +++ OnChangeInterfaceInfo +++
0x8014abcc: StatusPollCycles = 00000100
0x8014abcc: SoftResetTimeout = 00000003
0x8014abcc: DMAAlignment = 00000004
0x8014abcc: SysIntr = 00000000
0x8014abcc: Irq = 0000000E
0x8014abcc: Legacy = 00000001
0x8014abcc: ConfigEntry = GenericConfig
0x8014abcc: SubClass = 00000001
0x8014abcc: Class = 00000001
0x8014abcc: Order = 00000002
0x8014abcc: Dll = atapi.dll
0x8014abcc: Prefix = IDE
0x8014abcc: IClass :
0x8014abcc:
{CDDC3621-3512-4b3f-BB6F-B4DD5E061795}
0x8014abcc: SpawnFunction = CreatePCIHDCD
0x8014abcc: InstanceIndex = 00000001
0x8014abcc: Atapi!IDE_Init> Start of IDE/ATA device enumeration
0x8014abcc: Atapi!IDE_Init> Enumerated IDE/ATA device
Drivers\BuiltIn\PCI\Instance\ALI14531\Device3
0x8014abcc: Atapi!IDE_Init> Enumerated IDE/ATA device
Drivers\BuiltIn\PCI\Instance\ALI14531\Device2
0x8014abcc: Atapi!IDE_Init> Enumerated IDE/ATA device
Drivers\BuiltIn\PCI\Instance\ALI14531\Device1
0x8014abcc: Atapi!IDE_Init> Enumerated IDE/ATA device
Drivers\BuiltIn\PCI\Instance\ALI14531\Device0
0x8014abcc: Atapi!IDE_Init> End of IDE/ATA device enumeration
0x8014abcc: Atapi!IDE_Init> Activating IDE/ATA device
Drivers\BuiltIn\PCI\Instance\ALI14531\Device0
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\ALI14531\Device0\BusPrefix)
returned 2
0x8014abcc: Atapi!DumpRegKey> Drivers\Active\09
0x8014abcc: Hnd = 0004CF20
0x8014abcc: Name = DSK2:
0x8014abcc: Key =
Drivers\BuiltIn\PCI\Instance\ALI14531\Device0
0x8014abcc: Atapi!DumpRegKey>
Drivers\BuiltIn\PCI\Instance\ALI14531\Device0
0x8014abcc: Port = 0005DEE0
0x8014abcc: TransferMode = 000000FF
0x8014abcc: DeviceId = 00000000
0x8014abcc: LookAhead = 00000001
0x8014abcc: WriteCache = 00000001
0x8014abcc: DrqDataBlockSize = 00000200
0x8014abcc: DoubleBufferSize = 00010000
0x8014abcc: DMA = 00000002
0x8014abcc: InterruptDriven = 00000001
0x87b6e800: IPv6hlp:: --- OnChangeInterfaceInfo ---
0x87b5e9b0: AFD:ResolveName !No IPv4 Interfaces
0x87b5e9b0: AFD:ResolveName !No IPv6 Interfaces
0x87b5e9b0: !No Interfaces
0x87b5e9b0: Ipv6Hlp:: 0x87b5e9b0: GetAddrInfoW for
[6to4.ipv6.microsoft.com.] returned [10050]0x8014abcc:
Dll =
atapi.dll
0x8014abcc: Prefix = DSK
0x8014abcc: IClass :
0x8014abcc:
{A4E7EDDA-E575-4252-9D6B-4195D48BB865}
0x8014abcc: Atapi!CPCIDisk::CPCIDisk> device count(1)
0x8014abcc: Atapi!CDisk::ResetController> Device is busy; 3 seconds
remaining
0x8014abcc: Atapi!CDisk::ResetController> Device is busy; 2 seconds
remaining
0x8014abcc: Atapi!CDisk::ResetController> Device is busy; 1 seconds
remaining
0x8014abcc: Atapi!CDisk::ResetController> Timeout
0x8014abcc: Atapi!CDisk::Init> Failed to initialize device
0x8014abcc: Atapi!CPCIDisk::~CPCIDisk> device count(0)
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x0004cf20
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix DSK,
index 2, dll atapi.dll, context 0x602d030
0x8014abcc: Atapi!IDE_Init> Activating IDE/ATA device
Drivers\BuiltIn\PCI\Instance\ALI14531\Device1
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\ALI14531\Device1\BusPrefix)
returned 2
0x8014abcc: Atapi!DumpRegKey> Drivers\Active\10
0x8014abcc: Hnd = 0004CF20
0x8014abcc: Name = DSK2:
0x8014abcc: Key =
Drivers\BuiltIn\PCI\Instance\ALI14531\Device1
0x8014abcc: Atapi!DumpRegKey>
Drivers\BuiltIn\PCI\Instance\ALI14531\Device1
0x8014abcc: Port = 0005DEE0
0x8014abcc: TransferMode = 000000FF
0x8014abcc: DeviceId = 00000001
0x8014abcc: LookAhead = 00000001
0x8014abcc: WriteCache = 00000001
0x8014abcc: DrqDataBlockSize = 00000200
0x8014abcc: DoubleBufferSize = 00010000
0x8014abcc: DMA = 00000002
0x8014abcc: InterruptDriven = 00000001
0x8014abcc: Dll = atapi.dll
0x8014abcc: Prefix = DSK
0x8014abcc: IClass :
0x8014abcc:
{A4E7EDDA-E575-4252-9D6B-4195D48BB865}
0x8014abcc: Atapi!CPCIDisk::CPCIDisk> device count(1)
0x8014abcc: Atapi!CDisk::IsDevicePresent> Device 1 is not present;
Error register(0xff)
0x8014abcc: Atapi!CDisk::InitController> Device did not respond to
identify
0x8014abcc: Atapi!CDisk::Init> Failed to initialize device
0x8014abcc: Atapi!CPCIDisk::~CPCIDisk> device count(0)
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x0004cf20
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix DSK,
index 2, dll atapi.dll, context 0x602d030
0x8014abcc: Atapi!IDE_Init> Activating IDE/ATA device
Drivers\BuiltIn\PCI\Instance\ALI14531\Device2
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\ALI14531\Device2\BusPrefix)
returned 2
0x8014abcc: Atapi!DumpRegKey> Drivers\Active\11
0x8014abcc: Hnd = 0004CF20
0x8014abcc: Name = DSK2:
0x8014abcc: Key =
Drivers\BuiltIn\PCI\Instance\ALI14531\Device2
0x8014abcc: Atapi!DumpRegKey>
Drivers\BuiltIn\PCI\Instance\ALI14531\Device2
0x8014abcc: Port = 0005DF50
0x8014abcc: DeviceId = 00000000
0x8014abcc: TransferMode = 000000FF
0x8014abcc: LookAhead = 00000001
0x8014abcc: WriteCache = 00000001
0x8014abcc: DrqDataBlockSize = 00000200
0x8014abcc: DoubleBufferSize = 00010000
0x8014abcc: DMA = 00000002
0x8014abcc: InterruptDriven = 00000001
0x8014abcc: Dll = atapi.dll
0x8014abcc: Prefix = DSK
0x8014abcc: IClass :
0x8014abcc:
{A4E7EDDA-E575-4252-9D6B-4195D48BB865}
0x8014abcc: Atapi!CPCIDisk::CPCIDisk> device count(1)
0x8014abcc: Atapi!CDisk::ResetController> Device is busy; 3 seconds
remaining
0x8014abcc: Atapi!CDisk::ResetController> Device is busy; 2 seconds
remaining
0x8014abcc: Atapi!CDisk::ResetController> Device is busy; 1 seconds
remaining
0x8014abcc: Atapi!CDisk::ResetController> Timeout
0x8014abcc: Atapi!CDisk::Init> Failed to initialize device
0x8014abcc: Atapi!CPCIDisk::~CPCIDisk> device count(0)
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x0004cf20
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix DSK,
index 2, dll atapi.dll, context 0x602d030
0x8014abcc: Atapi!IDE_Init> Activating IDE/ATA device
Drivers\BuiltIn\PCI\Instance\ALI14531\Device3
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\ALI14531\Device3\BusPrefix)
returned 2
0x8014abcc: Atapi!DumpRegKey> Drivers\Active\12
0x8014abcc: Hnd = 0004CF20
0x8014abcc: Name = DSK2:
0x8014abcc: Key =
Drivers\BuiltIn\PCI\Instance\ALI14531\Device3
0x8014abcc: Atapi!DumpRegKey>
Drivers\BuiltIn\PCI\Instance\ALI14531\Device3
0x8014abcc: Port = 0005DF50
0x8014abcc: DeviceId = 00000001
0x8014abcc: TransferMode = 000000FF
0x8014abcc: LookAhead = 00000001
0x8014abcc: WriteCache = 00000001
0x8014abcc: DrqDataBlockSize = 00000200
0x8014abcc: DoubleBufferSize = 00010000
0x8014abcc: DMA = 00000002
0x8014abcc: InterruptDriven = 00000001
0x8014abcc: Dll = atapi.dll
0x8014abcc: Prefix = DSK
0x8014abcc: IClass :
0x8014abcc:
{A4E7EDDA-E575-4252-9D6B-4195D48BB865}
0x8014abcc: Atapi!CPCIDisk::CPCIDisk> device count(1)
0x8014abcc: Atapi!CDisk::IsDevicePresent> Device 1 is not present;
Error register(0xff)
0x8014abcc: Atapi!CDisk::InitController> Device did not respond to
identify
0x8014abcc: Atapi!CDisk::Init> Failed to initialize device
0x8014abcc: Atapi!CPCIDisk::~CPCIDisk> device count(0)
0x8014abcc: DEVICE!LaunchDevice: Init() failed for device 0x0004cf20
0x8014abcc: DEVICE!I_ActivateDeviceEx: couldn't activate: prefix DSK,
index 2, dll atapi.dll, context 0x602d030
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\ehci1\BusPrefix) returned
2
0x8014abcc: HCD driver DLL attach
0x8014abcc: EHCD!HCD_Init
0x8014abcc: EHCD: Read config from registry: Base Address: 0xF4080000,
Length: 0x400, I/O Port: NO, SysIntr: 0x18, Interface Ty
pe: 5, Bus Number: 0
0x8014abcc: EHCD: ioPhysicalBase 0xF4080000, IoSpace 0x0
0x8014abcc: EHCD: ioPortBase 0x310000, portBase 0xF4080000
0x8014abcc: EHCD: Installed ISR handler, Dll = 'giisr.dll', Handler =
'ISRHandler', Irq = 10
0x8014abcc: DMA buffer passed in from PDD
0x8014abcc: CPhysMem Total Alloc Region PhysAddr = 0x04F67000,
VirtAddr = 0x003F0000, size = 131072
0x8014abcc: CPhysMem Special Alloc Region PhysAddr = 0x04F67000,
VirtAddr = 0x003F0000, size = 4096
0x8014abcc: CPhysMem HighPri Alloc Region PhysAddr = 0x04F68000,
VirtAddr = 0x003F1000, size = 32768
0x8014abcc: CPhysMem Normal Alloc Region PhysAddr = 0x04F70000,
VirtAddr = 0x003F9000, size = 94208
0x8014abcc: +CHW::CHW base=0x310000, intr=0x18
0x8014abcc: +CEhcd::Initialize. Entry
0x8014abcc: +CDeviceGlobal::Initialize
0x8014abcc: +USBD:HcdAttach, hcd: 0x59BC0
0x8014abcc: -CDevice::Initialize, success!
0x8014abcc: +CHW::Initialize
0x8014abcc: -CHW::Initialize, success!
0x8014abcc: +CHW::EnterOperationalState
0x8014abcc: -CHW::EnterOperationalState
0x8014abcc: -CEhcd::Initialize. Success!!
0x8014abcc: DeviceFolder::LoadDevice!Enumerate Found deprecated load
instructions at (Drivers\BuiltIn\PCI\Instance\E100CE1). Dr
iver cannot be unloaded.
0x8014abcc: ==>NdisInitializeWrapper
0x8014abcc: <==NdisInitializeWrapper
0x8014abcc: ==>NdisMRegisterMiniport: NdisWrapperHandle 0005E120
0x8014abcc: ==>ndisRegisterMiniportDriver: NdisWrapperHandle 0005E120
0x8014abcc: <==ndisRegisterMiniportDriver: MiniBlock 003C4CE0
0x8014abcc: NdisMRegisterMiniport: MiniBlock 003C4CE0
0x8014abcc: <==NdisMRegisterMiniport: MiniBlock 003C4CE0, Status 0
0x8014abcc:
0x8014abcc: ndisMInitializeAdapter: Miniport 003C4E40, 0x8014abcc:
==>ndisQueueMiniportOnDriver: Miniport 003C4E40, MiniBlock 0
03C4CE0
0x8014abcc: <==ndisQueueMiniportOnDriver: Miniport 003C4E40, MiniBlock
003C4CE0, rc 1
0x8014abcc: ==>NdisMSetAttributesEx: Miniport 003C4E40
0x8014abcc: ==>NdisMMapIoSpace
0x8014abcc: ==>NdisMRegisterAdapterShutdownHandler: Miniport 003C4E40
0x8014abcc: <==NdisMRegisterAdapterShutdownHandler: Miniport 003C4E40
0x8014abcc: NDIS: Adapter PCI\E100CE1 - NOT using OPTIMIZED RX handler
0x8014abcc: +OpenIFConfigEx(Comm\PCI\E100CE1\Parms\TCPIP Handle
0x602CF78)
0x8014abcc: +OpenIFConfig(Comm\PCI\E100CE1\Parms\TCPIP Handle
0x602CF78)
0x8014abcc: Opened registry info for Comm\PCI\E100CE1\Parms\TCPIP
0x8014abcc: -OpenIFConfig(Comm\PCI\E100CE1\Parms\TCPIP *Handle
0x602CF78, BOOL Ret: 1)
0x8014abcc: -OpenIFConfigEx(Comm\PCI\E100CE1\Parms\TCPIP *Handle
0x602CF78, BOOL Ret: 1)
0x8014abcc: *CloseIFConfig(Handle 0xB5450)
0x8014abcc: +OpenIFConfig(Comm\PCI\E100CE1\Parms\TCPIP Handle
0x602CF00)
0x8014abcc: Opened registry info for Comm\PCI\E100CE1\Parms\TCPIP
0x8014abcc: -OpenIFConfig(Comm\PCI\E100CE1\Parms\TCPIP *Handle
0x602CF00, BOOL Ret: 1)
0x8014abcc: +GetGeneralIFConfig(ConfigInfo 0x602CE94 Handle 0xB5450)
0x8014abcc: GetGeneralIFConfig:Unable to read DefaultGateway
value!
0x8014abcc: GetGeneralIFConfig:Unable to read DNS value!
0x8014abcc: GetGeneralIFConfig:Unable to read WINS value!
0x8014abcc: GetGeneralIFConfig:Unable to read UseZeroBroadcast
value!
All-nets broadcasts will be addressed to 255.255.255.255
0x8014abcc: -GetGeneralIFConfig(ConfigInfo 0x602CE94 Handle 0xB5450
Ret: TRUE)
0x8014abcc: +GetIFAddrList(NumAddr* 0x602CE60 Handle 0xB5450)
0x8014abcc: *IPAddNTE: calling ARPDynRegister
0x8014abcc: NDIS: Adapter PCI\E100CE1 - NOT using OPTIMIZED RX handler
0x8014abcc: *CloseIFConfig(Handle 0xB5450)
0x8014abcc: +OpenIFConfig(Comm\PCI\E100CE1\Parms\TCPIP Handle
0x602CD28)
0x8014abcc: Opened registry info for Comm\PCI\E100CE1\Parms\TCPIP
0x8014abcc: -OpenIFConfig(Comm\PCI\E100CE1\Parms\TCPIP *Handle
0x602CD28, BOOL Ret: 1)
0x8014abcc: *CloseIFConfig(Handle 0xB5450)
0x8014abcc: DHCP:: $$$ NewDhcpInfo: 0x3cbba0
0x8014abcc: -RequestDHCPAddr: Context 2
0x8014abcc: +IPNotifyClientsIPEvent
0x87bd4e00: NotifyChange: Setting Event 87AEC3AA
0x8014abcc: IPNotifyClientsIPEvent: PendingIPGetIPEventRequest
4ad50
0x8014abcc: IPNotifyClientsIPEvent: SetEvent
0x8014abcc: -IPAddInterface [SUCCESS]
0x8014abcc: CreateInterface(IF 5/0012F880):
\DEVICE\TCPIP6_{25c10a30-6fc8-8ac9-cf97-857cee1fa926} -> 0
0x8014abcc: CreateNTE(IF 5/0012F880, Addr fe80::2e0:4bff:fe0b:6a6a) ->
NTE 0012FB40
0x87b5e9b0: SynchronizeMulticastAddresses(IF 0012F880) 0 + 2 + 0
0x8014abcc: *v6CreatInterface: setting v6IPTimerOn to 1
0x87af38a8: IPv6Hlp:: +++ OnChangeInterfaceInfo +++
0x87b82938: ************DHCP MEDIA STATUS************
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\efilter.c at line 1711
0x8014abcc: NDIS: Adapter PCI\E100CE1 - NOT using OPTIMIZED RX handler
0x87b82938: SeqNo: 1
0x8014abcc: IPv6 LanReceive: Interface down
0x87ada800: DEBUG_BREAK @039c2a6f Ignored.
0x87b82938: MediaStatus: 11026
0x8014abcc: DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\PCI-PCI-BRIDGE1\DllName)
returned 2
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\efilter.c at line 2186
0x87b82938: Context: 2 - 2
0x8014abcc: DEVICE!I_ActivateDeviceEx: can't find all required
activation values in 'Drivers\BuiltIn\PCI\Instance\PCI-PCI-BRIDG
E1'
0x87ada800: DEBUG_BREAK @039c342e Ignored.
0x87b82938: AdapterName: PCI\E100CE1
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\sendm.c at line 1007
0x801abbe8: FILESYS: SignalStarted loop = 1
0x87b82938: Media Status is: IP_BIND_ADAPTER
0x87ada800: DEBUG_BREAK @039dbbff Ignored.
0x801abbe8: FILESYS: Launching gwes.exe
0x87b82938: IPDispatchDeviceControl returned Status 103
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\efilter.c at line 1711
0x87ada800: DEBUG_BREAK @039c2a6f Ignored.
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\efilter.c at line 2186
0x87ada800: DEBUG_BREAK @039c342e Ignored.
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\sendm.c at line 1007
0x87ada800: DEBUG_BREAK @039dbbff Ignored.
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\efilter.c at line 1711
0x87ada800: DEBUG_BREAK @039c2a6f Ignored.
0x87af0b00: SetDhcpConfig: set IPAddr 7FE681AA
0x87af0b00: SetDhcpConfig: set LeaseObtained 1c5ff18 8bf05a90
0x87af0b00: SetDhcpConfig: T1 708 T2 c4e Lease e10
0x87af0b00: +AfdAddInterface(Adapter PCI\E100CE1 Nte 0x12E280 Context
2, Flags 0 IPAddr 7FE681AA cDns 2 cWins 2)
0x87af0b00: -AfdAddInterface: fRet: 1
0x87af0b00: LanaUp: (NB) pLana 3CCC20 (1) up Addr 7FE681AA Mask
FFFFFF Bcast FFE681AA
0x87af0b00: IPNat received net up indication, Index:2,
Adapter:<PCI\E100CE1>, IP: 170.129.230.127 MTU=1500
0x87af0b00: IPNat: Address translation Disabled, DHCP allocator:
Disabled, DNS proxy: Disabled, Firewall: Disabled
0x87af0b00: IGMPDelInclList: AddrPtr=130050 NumDelSources=0
DelSourceList=0
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\efilter.c at line 2186
0x87ada800: DEBUG_BREAK @039c342e Ignored.
0x87ad4d08: InitSharedHeap: 48300000 0 c
0x87af38a8: CreateNTE(IF 3/00119250, Addr 2002:aa81:e67f::aa81:e67f) ->
NTE 00130B90
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\sendm.c at line 1007
0x87ad4d08: InitSharedHeap: return 48300060
0x87af38a8: CreateNTE(IF 2/00118FF0, Addr fe80::5efe:170.129.230.127)
-> NTE 00132120
0x87ada800: DEBUG_BREAK @039dbbff Ignored.
0x87ad4d08: Ceddk!CalibrateStallCounter: Enter
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\sendm.c at line 1007
0x87ad4d08: Ceddk!CalibrateStallCounter: Stall counter loaded from
registry(53)
0x87ada800: DEBUG_BREAK @039dbbff Ignored.
0x87ad4d08: System Default HKL value set to 00000409
0x87ada800: Unknown: DEBUGCHK failed in file
E:\macallan\private\winceos\COMM\ndis51\sys\.\sendm.c at line 1007
0x87ad4d08: Grow Gdi handle table from 0 to 64
0x87ada800: DEBUG_BREAK @039dbbff Ignored.
0x87ad4d08: LogFontFromRegistry(SYSTEM\GDI\SysFnt), lfHeight =
-120x87ada800: Unknown: DEBUGCHK failed in file E:\macallan\priv
ate\winceos\COMM\ndis51\sys\.\sendm.c at line 1007
0x87ada800: DEBUG_BREAK @039dbbff Ignored.
[...]

.

Relevant Pages

  • CF Flash driver is loaded for hive-based registry, hangs anyway
    ... A already put all neccessary Registry Keys ... inside the appropriate comments (see the post "Ho to run CF driver before ... 0x83fe9000: FSREG: Invalid HKEY 0x00000000 ...
    (microsoft.public.windowsce.platbuilder)
  • Re: HowTo: Unregister a DLL/Control when the File no longer Exists
    ... Tony Proctor wrote: ... recorded in the registry. ... However, matching them up without the original DLL ... The main project references one of the DLLs, ...
    (microsoft.public.vb.general.discussion)
  • WINCE600, Hive Reg, Private Code Error
    ... 6678 PID:400002 TID:680002 FSVOL: Volume heap already initialized ... 6678 PID:400002 TID:680002 FSREG: Mounted ROM portion of boot ... Registered "Storage Card" at index 4 ...
    (microsoft.public.windowsce.platbuilder)
  • Re: How do I load a third party driver in Windows CE 6.0
    ... I had a look at the link to the documentation you sent a link to and I ... I would get a dll to load. ... What do I have to do in the registry to get my dll to ... then myusbdevicedriver.dll will get loaded when I attach my USB device. ...
    (microsoft.public.windowsce.embedded)
  • Problem HIVE based registry WINCE 6.0
    ... I have some trouble with the registry hive. ... FSVOL: Volume heap already initialized ... FSREG: Mounted ROM portion of boot registry ... FS: Creating signal event SYSTEM/DevMgrApiSetReady ...
    (microsoft.public.windowsce.platbuilder)