Re: How to connect to PC using serial port by AS?
- From: "Bruce Eitman \(eMVP\)" <beitman.nospam@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 9 Dec 2005 08:32:39 -0500
Sorry about that, time for new glasses for me, it is an F3B207-x
http://www.belkin.com/config/Search/SearchResults.asp?var=stemming&stemming=true&var2=num_rows&num_rows=10&var2=query.message&error_query=Go+back+and+enter+some+words+to+search+for.&RowsPerPage=10&RestartFlow=t&prod_attrib=5&catID=1&search=f3b207
--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net
Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member
"wyghf" <wyghf@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:AB87052A-FA86-41AE-AE1C-8703F06F2BEE@xxxxxxxxxxxxxxxx
> Thanks.
> 1. I cannot find FSB207 in Belkin website. Even if we can find it,maybe
> its
> interface is not the same as ours.We made the cable by ourself according
> to
> MS help document.
> 2.I don't know. How to set up?
> 3.Yes,I've set it to allow serial cable.
> 4.Yes,I also did the way you told me.
>
> I've no choice but I write two programs to send/receive file between PC
> and
> my device.Both program works well.Unfortunatly,I cannot debug my device's
> program just like when I debug my .net compact framework program using the
> Pocket PC(Acer n10,Acer n50).
>
> "Bruce Eitman (eMVP)" wrote:
>
>> So it sounds like you have the software set up correctly on the device,
>> that
>> leaves:
>>
>> 1. The cable, I strongly recommend using a a Belkin FSB207-X where the X
>> represents length and isn't important. The cable is very often the
>> problem
>> as ActiveSync is very dependent on hardware handshaking therefore the
>> cable
>> has to be right. Once you have it working, you can switch to a cheaper
>> cable.
>> 2. Your serial driver, is it correct for handshaking?
>> 3. PC side ActiveSync, is it set up to handle serial ports?
>> 4. It doesn't hurt to set the PC side default serial port settings to
>> 19200, this would be done in My Computer\Manage
>>
>> --
>> Bruce Eitman (eMVP)
>> Senior Engineer
>> beitman AT applieddata DOT net
>>
>> Applied Data Systems
>> www.applieddata.net
>> An ISO 9001:2000 Registered Company
>> Microsoft WEP Gold-level Member
>>
>> "wyghf" <wyghf@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:90F5FCE6-7AA7-43E7-A423-491C6FE7E83C@xxxxxxxxxxxxxxxx
>> > We developed a wince device,but cannot use AS to connect PC.My
>> > enviroment
>> > is:
>> > Wince device: wince 4.1
>> > PC: win2003, AS 3.8
>> >
>> > I read almost all past posts and test.They cannot work.Using
>> > Hyperterminal
>> > to test,everything is OK.If I make a direct connection,the PC's
>> > hyperterminal
>> > will recive four CLIENT. If I make a modem connection,do as microsoft
>> > support
>> > troubleshooting,both sending and receving is ok.I also do a
>> > clean-boot,it
>> > still cannot connected to PC(wince device display connected,but the AS
>> > icon
>> > become green and continue animating,display connecting...).I also use
>> > AS
>> > 4.1,result is the same.
>> >
>> > In order to test ,I also write two serial programs( server runs in
>> > Wince
>> > device,client runs in PC),they work fine.So I think there is no problem
>> > in
>> > hardware.Anyone could give me some advices?
>> >
>> > Another question: I know that wince can be used as a RDP (remote
>> > Desktop
>> > Connection) client.Can it be used as a RDP server?
>> >
>> > Thanks in advance
>> > wyghf
>>
>>
>>
.
- References:
- Re: How to connect to PC using serial port by AS?
- From: Bruce Eitman \(eMVP\)
- Re: How to connect to PC using serial port by AS?
- Prev by Date: Re: Display problems in 5.0
- Next by Date: Re: Steppingstone and bootloader - part II
- Previous by thread: Re: How to connect to PC using serial port by AS?
- Next by thread: Re: How to connect to PC using serial port by AS?
- Index(es):
Relevant Pages
|
