Re: wince 5.0 cepc download problem

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

=?Utf-8?B?U2FuZ2Vs?= <Sangel@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
news:CD5957F7-67E2-466D-A1A1-8623B5DADC74@xxxxxxxxxxxxx:

> thanx 4 ur reply
> i had my problem solved now the problem i faced was cepc had intel
> ethernet controller and 5.0 has no ethernet driver support for it
> but can u help me now in this
> i am downloading the image but cant see anything on cepc i found
> that display adapter is also of intel and 5.0 again has no display
> driver for this what can i do now isn't there any common display
> driver which I can use now
>

You may try to run the vesatest utility to check if your display
adapter support VESA compatible video modes. If it does support some
video modes, you may add the VGA video driver and set one of the
supported modes using loadcepc command line.
If it doesn't support VESA modes, you need to write a driver (if the
board exposes a "flat" memory area for drawing you may be able to use
the VGAFlat driver as reference and change only the display
initialization code) or you need to understand if the graphic card is
compatible with other cards supported by CE.


--
Valter Minute
(the reply address of this message is invalid)
(l'indirizzo di reply di questo messaggio non è valido)
.

Relevant Pages

  • Re: Dynamic display resolution change in CE 6.0
    ... I have looked a bit at the RageXL driver, and there are some places where that driver does special handling for the case of changing the display resolution. ... I will try to add this support by intercepting changes to the display mode ), and then manually deleting and reallocating the primary surface. ... "Michel Verhagen (eMVP)" wrote: ...
    (microsoft.public.windowsce.platbuilder)
  • [PATCH/RFC 2.6.20-rc4 1/1] fbdev,mm: hecuba/E-Ink fbdev driver
    ... This patch adds support for the Hecuba/E-Ink display with deferred IO. ... This is the frame buffer device driver for the Intel-based Macintosh ...
    (Linux-Kernel)
  • Re: 30" monitor and what video card?
    ... So long as it has a dual-link DVI connector, it will support 30" ... What has me still scratching my head is that when I 'enable all display modes', ... even the ones not supported by your monitor' the NVidia display applet only ... But sans a a fixed driver, ...
    (comp.sys.ibm.pc.hardware.video)
  • Re: Problem with Intel 945GME and LVDS
    ... It seems that your button shuts down display settings and no init is done on ... The driver has been built with Intels IEGD driver kit 8.0, ... with support for both 855 and 945 chipsets. ... of the new 945gme chipset that only is used with embedded stuff, ...
    (microsoft.public.windowsxp.embedded)
  • [GIT]: Networking
    ... maintainer making a lot of changes to driver FOO. ... support for networking. ... iwl3945: Fix iwl3945 rate scaling. ... Fix build warning due to typo in %pI4 format changes. ...
    (Linux-Kernel)