Re: ATAPI Hard Disk AGAIN
- From: Ulrich Eckhardt <eckhardt@xxxxxxxxxxxxxx>
- Date: Tue, 22 Nov 2005 16:31:47 +0100
Dean Ramsier wrote:
> How is your hardware (board, not card) wired, PCMCIA or IDE?
It's a PCMCIA hardware interface. When I map an inserted card and select the
proper configuration I can access a set of ATA controller registers, but
that is rather software than hardware.
> They are
> totally different and require different drivers, although the same CF card
> can be implemented in either mode in system hardware.
>
> You need to know if you have the card wired as regular CF or True IDE,
> then copy the appropriate driver.
So it's the CF driver, I know for sure that I don't want to use True IDE or
rather can't, as it requires different wiring.
> I don't use the clone features of the tools (which change from release
> to release), I just copy and modify. Might not be the one that is
> advertised, but it is the one that works (always).
I'll remember that statement when things fail, thanks.
Uli
.
- References:
- ATAPI Hard Disk AGAIN
- From: Buzzard
- Re: ATAPI Hard Disk AGAIN
- From: Dean Ramsier
- Re: ATAPI Hard Disk AGAIN
- From: Ulrich Eckhardt
- Re: ATAPI Hard Disk AGAIN
- From: Dean Ramsier
- ATAPI Hard Disk AGAIN
- Prev by Date: Re: passing arguments from bootloader to kernel
- Next by Date: Re: OSDesign Tab vanishes
- Previous by thread: Re: ATAPI Hard Disk AGAIN
- Next by thread: How to build a platform with phone function?
- Index(es):
Relevant Pages
|
