Re: AT91RM9200EK Image downloading not possible

Thats it. Thanks!


"Anthony Pellerin" <apellerin_nospam@xxxxxxxxxxxxxxxxxxxxxx> escribió en el
mensaje news:%23Qtkx9L1FHA.2880@xxxxxxxxxxxxxxxxxxxxxxx
> Maybe you should check your connectivity options in Platform Builder
> (target->connectivity options->core service settings) and make sure PB
> will try to download the image (set to always)
> HTH
>
> --
> ----------------------------------------------------------------
> Anthony Pellerin
> ADENEO (ADESET)
> Windows Embedded Consultant
> <apellerin AT adeneo DOT adetelgroup DOT com>
> http://www.adeneo.adetelgroup.com
> Tél : +33 (0)4.72.18.57.77
> Fax : +33 (0)4.72.18.57.78
> ----------------------------------------------------------------
>
>
> "Arcturus" <noreply> wrote in message
> news:435659f3$0$27856$afc38c87@xxxxxxxxxxxxxxxxxx
>>
>> Hi,
>>
>> I'm not able to download the image on the AT91RM9200EK: the board reboots
>> just before the tranfer starts as described in next trace:
>>
>>
>> ATMEL LOADER VER 1.02 Jul 20 2004 17:10:43
>> *--------------------------------------*
>> DataFlash:AT45DB642
>> Nb pages: 8192
>> Page Size: 1056
>> Size= 8650752 bytes
>> Logical address: 0xC0000000
>> *--------------------------------------*
>> 1: Download Dataflash [addr]
>> 2: Read Dataflash [addr]
>> 3: Start BOOT [C0004000 => 20000000]
>> *--------------------------------------*
>> Enter: Load CE-BOOT from dataflash[c0004000] to SDRAM[20000000]
>> Set PLLA to 180Mhz and Master clock to 60Mhz and start EBOOTþInit Debug
>> Serial OK!
>>
>> Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built
>> Nov 24 2004 10:12:18
>> Microsoft Windows CE Ethernet Bootloader 1.0 for AT91RM9200EK board (May
>> 23 2005 : 11:17:55)
>> Copyright (c) 2001 Microsoft Corporation
>> Portions copyright (c) 2004 Adeset SAS - Atmel Corporation
>> Integration and development performed by Adeset SAS
>>
>> Bus Speed 59897 kHz
>> CPU Speed 179692 kHz
>>
>>
>> Performing POST...Successful
>> Nand Density = 0x38 Device sdf status=0xBC
>>
>> Nand Density = 0x38 Device sdf status=0xBC
>>
>> Nand Density = 0x38 Device sdf status=0xBC
>>
>> Nand Density = 0x38 Device sdf status=0xBC
>>
>> RAW_Init : Initialisation Done ...
>>
>>
>>
>> Press any key to break into configuration menu 5 ...
>> Press any key to break into configuration menu 4 ...
>> Press any key to break into configuration menu 3 ...
>> Press any key to break into configuration menu 2 ...
>> Press any key to break into configuration menu 1 ...
>>
>> g_BldrSettings.nFlags =1.
>> Boot Args @ 0x20048800
>> +EDBG:AT91Init
>> EDBG:AT91Init low level init for bootloader
>> ***AT91_net: set MII for 100BaseTX and Full Duplex
>> ***Basic Emac Init : ethernet at 0xFFFBC000 Base100-Full
>> (hwaddr = DE:DE:03:02:01:00)
>> EDBG:AT91Init using I/O range at 0xFFFBC000
>> AT91_EmacReadPhy n°1! OK
>> AT91_EmacReadPhy n°2! OK
>> EDBG:AT91Init Reading MAC address 0x00000100 0x00000302 0x0000DEDE
>> -EDBG:AT91Init
>> INFO: Debug Ethernet MAC Address:00:01:02:03:DE:DE
>> System ready!
>> Preparing for download...
>> CreateDeviceName
>> UpperDWORD = 0x00000102
>> INFO: Using device name: 'AT91EK57054'
>> InitDHCP():: Calling ProcessDHCP()
>> ProcessDHCP()::DHCP_INIT
>> Got Response from DHCP server, IP address: 192.168.0.212
>>
>> ProcessDHCP()::DHCP IP Address Resolved as 192.168.0.212, netmask:
>> 255.255.255.0
>> Lease time: 86400 seconds
>> Got Response from DHCP server, IP address: 192.168.0.212
>> No ARP response in 2 seconds, assuming ownership of 192.168.0.212
>> +EbootSendBootmeAndWaitForTftp
>> Sent BOOTME to 255.255.255.255
>> Got EDBG_CMD_JUMPIMG
>> Got EDBG_CMD_CONFIG, flags:0x00000000
>> -EbootSendBootmeAndWaitForTftp
>> g_BldrSettings.nFlags 1
>> SpinForever...
>>
>> -I- AT91F_LowLevelInit(): Debug channel initialized
>> ESC[2J
>>
>>
>> Thanks for your help.
>>
>
>


.

Relevant Pages

  • AT91RM9200EK Image downloading not possible
    ... I'm not able to download the image on the AT91RM9200EK: ... Press any key to break into configuration menu 5 ... ... Got Response from DHCP server, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Internet Explorer Ignoring supportedRuntime Directive
    ... even if you specify a different value in the application configuration ... Native image will not be probed in LoadFrom context. ... LOG: Attempting download of new URL http://navilinkd2/assemblies/Main.dll. ... The web server may be configured to ...
    (microsoft.public.dotnet.framework.clr)
  • ANN: matplotlib-0.91.2 - a python graphics package
    ... A new release of matplotlib is posted to the sourceforge download ... better configuration - Darren Dale has provided support for a site.cfg ... record array support - New functions for loading, ...
    (comp.lang.python)
  • Re: AT91RM9200EK Image downloading not possible
    ... Windows Embedded Consultant ... <apellerin AT adeneo DOT adetelgroup DOT com> ... > I'm not able to download the image on the AT91RM9200EK: ... > Press any key to break into configuration menu 5 ... ...
    (microsoft.public.windowsce.platbuilder)
  • Re: _X11TransSocketUNIXConnect ... Sell me on Linux
    ... > around 2000 and it was a secondhand machine even then. ... > circular position of having to download the means of downloading. ... Ask for a Knoppix CD on your local LUG's mailing list, ... > choice by one of the configuration programs but not the other. ...
    (comp.os.linux.x)