Re: Driver loading problem

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Hi

When I add more debug messages, I'm getting the following debug messages.
OEMInitDebugSerial using UART1

Windows CE Kernel for ARM (Thumb Enabled) Built on May 3 2005 at 14:03:39

ProcessorType=02d0 Revision=6

sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9d8c

OEMInit ++

OEMInit --

Booting Windows CE version 4.20 for (ARM)

&pTOC = 800c23dc, pTOC = 80990968, pTOC->ulRamFree = 809ca000, MemForPT =
00000000

Old or invalid version stamp in kernel structures - starting clean!

Configuring: Primary pages: 13033, Secondary pages: 0, Filesystem pages =
6516

Booting kernel with clean memory configuration:

Memory Sections:

[0] : start: 809cb000, extension: 00004000, length: 032e9000

Sp=ffffc7cc

ARMInit done.

Windows CE KernelInit

Updated eptr->e32_vsize to = 00092000

Scheduling the first thread.

0x83cb7024: KernelInit2: pCurThread=83cb7024 hCurThread=03cb7262
hCurProc=03cb7002, KernelInit = 800d9360

0x83cb7024: Detecting VFP...0x83cb7024: VFP Not Found!

0x83cb7024: first = 01fa0000, last = 02000000, SharedDllBase = 03850000

0x83ca5644: FileSystem Starting - starting with clean file system

Any help is appreciated

Anand

"Steve Maillet (eMVP)" <nospam1@xxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:O%23ZzUFC0FHA.2348@xxxxxxxxxxxxxxxxxxxxxxx
> Forget about symbols for GWES. What does the debug serial/kitl output
> show?
>
> --
> Steve Maillet
> EmbeddedFusion
> www.EmbeddedFusion.com
> smaillet at EmbeddedFusion dot com
>
>


.

Relevant Pages

  • Re: Debugging nk.bin..
    ... mean what are the functions that are called one by one after kernel start... ... In my bsp i predicted the flow to be like this... ... I am actually in the process of migrating 4.2 bsp to 5.0. ... debug messages on the PB. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: [patch 0/3] dynamic_printk: new feature
    ... How about not just debug messages but setting a loglevel for each module ... kernel messages emitted beneath the loglevel value ... Replace the unconditional printk() messages with printkmessages that are ...
    (Linux-Kernel)
  • Re: How to enable DEBUGMSG in Windows ce 6.0 kernel
    ... My unit boots, it's the kernel that hangs, as you can see from the log I ... 0x7FFFFFFF FIXUPVAR ... lines to the config.bib has no effect to the debug messages that are shown ... +OEMInit: OALCacheGlobalsInit ...
    (microsoft.public.windowsce.platbuilder)
  • Re: i18n for kernel 2.7.x?
    ... why not internationalization of kernel. ... > that the kernel could display error or debug messages in different ... bad a concept in Text Editors as it is in women. ... send the line "unsubscribe linux-kernel" in ...
    (Linux-Kernel)