Re: tftp of image

Tech-Archive recommends: Speed Up your PC by fixing your registry

The Error message you got is because the TFTP.EXE could *not* open the
boot.bin in your local directory.
Make sure you have modified the file name fomr nk.bin to boot.bin and
execute the tftp in the folder that contain the boot.bin.

"ms" <ms@xxxxxxxxxxxxxxxxxxxxxxxxx> ¼¶¼g©ó¶l¥ó·s»D:OmgJLc3zFHA.3588@xxxxxxxxxxxxxxxxxxxxxxx
> Thanks, i've been following your post from 2004.
> I've just tried your suggestion and it comes back with
>
> tftp: can't read from local file boot.bin
>
> Using host name from ipconfig/all is the only host name that
> made something happen even though it did not work.
>
>
> "K. S. Huang" <ksh_AT_bsquare_DOT_com> wrote in message
> news:ekI3SEzzFHA.2880@xxxxxxxxxxxxxxxxxxxxxxx
>> Do you try to use the Ip address of your target device as the host
>> parameter??
>> I have some experience of mofying the EBoot that using port 69 as the
>> TFTP
>> server port, and it was working fine.
>> BTW, with some minor modification, you may also configure the EBoot as a
>> TFTP client.
>>
>> "ms" <ms@xxxxxxxxxxxxxxxxxxxxxxxxx>
> ¼¶¼g©ó¶l¥ó·s»D:u3DFtFwzFHA.2924@xxxxxxxxxxxxxxxxxxxxxxx
>> > Hi,
>> >
>> > I am trying to download nk.bin using tftp.exe in windows. I've changed
>> > ebsimp.c
>> > ie the EDBG_DOWNLOAD_PORT parameter to 69, in the file. Its all cloned
>> > in my bsp\platfrom directory. I've renamed nk.bin to boot.bin. The new
>> > Eboot
>> > is on the board, i've noticed PB can still download image with port set
> to
>> > 69.
>> > Anyway tftp is not working. I am using command line such as
>> >
>> > tftp -i gbst put boot.bin in release
>> > dir
>> > cmd shell
>> >
>> > when i switch on the board. All i get is Transfer successful 8706507
> bytes
>> > in 3 secs,
>> > 2902169 bytes/s which is wrong ie not downloading anything. Do i need
>> > to
>> > set
>> > up
>> > anything before using tftp. I got the host name gbst from typing
> ipconfig
>> > /all.
>> >
>> >
>>
>>
>
>


.

Relevant Pages

  • Re: tftp of image
    ... Do you try to use the Ip address of your target device as the host ... I have some experience of mofying the EBoot that using port 69 as the TFTP ...
    (microsoft.public.windowsce.platbuilder)
  • Re: tftp of image
    ... Using host name from ipconfig/all is the only host name that ... > I have some experience of mofying the EBoot that using port 69 as the TFTP ... >> I am trying to download nk.bin using tftp.exe in windows. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Services & Firewall port settings
    ... > Because this definition of port numbers allowed I/O is a basic security ... Pretty much all of the Windows ... that file that causes some insecurity is the line about tftp. ... I would use a third party firewall instead, ...
    (microsoft.public.security)
  • Re: Downloading nk.bin to Target device without PB?
    ... Anyone you like that can be set to port 980. ... because that's the filename the bootloader tftp server expects to be ... should use a tftp client on the host. ... download use a slightly modified TFTP protocol (it uses port 980 rather ...
    (microsoft.public.windowsce.platbuilder)
  • RE: TFTP Scanner recommendation requested
    ... that port open, it needs to be checked regardless if there is an ... Subject: TFTP Scanner recommendation requested ... looking for open udp/69 ports with tftp requests being made on each ... I know that msblast opens up that ...
    (Pen-Test)