Re: tftp of image

Thanks, i've been following your post from 2004.
I've just tried your suggestion and it comes back with

tftp: can't read from local file boot.bin

Using host name from ipconfig/all is the only host name that
made something happen even though it did not work.


"K. S. Huang" <ksh_AT_bsquare_DOT_com> wrote in message
news:ekI3SEzzFHA.2880@xxxxxxxxxxxxxxxxxxxxxxx
> Do you try to use the Ip address of your target device as the host
> parameter??
> I have some experience of mofying the EBoot that using port 69 as the TFTP
> server port, and it was working fine.
> BTW, with some minor modification, you may also configure the EBoot as a
> TFTP client.
>
> "ms" <ms@xxxxxxxxxxxxxxxxxxxxxxxxx>
¼¶¼g©ó¶l¥ó·s»D:u3DFtFwzFHA.2924@xxxxxxxxxxxxxxxxxxxxxxx
> > Hi,
> >
> > I am trying to download nk.bin using tftp.exe in windows. I've changed
> > ebsimp.c
> > ie the EDBG_DOWNLOAD_PORT parameter to 69, in the file. Its all cloned
> > in my bsp\platfrom directory. I've renamed nk.bin to boot.bin. The new
> > Eboot
> > is on the board, i've noticed PB can still download image with port set
to
> > 69.
> > Anyway tftp is not working. I am using command line such as
> >
> > tftp -i gbst put boot.bin in release
> > dir
> > cmd shell
> >
> > when i switch on the board. All i get is Transfer successful 8706507
bytes
> > in 3 secs,
> > 2902169 bytes/s which is wrong ie not downloading anything. Do i need to
> > set
> > up
> > anything before using tftp. I got the host name gbst from typing
ipconfig
> > /all.
> >
> >
>
>


.

Relevant Pages

  • Re: Downloading nk.bin to Target device without PB?
    ... Anyone you like that can be set to port 980. ... because that's the filename the bootloader tftp server expects to be ... should use a tftp client on the host. ... download use a slightly modified TFTP protocol (it uses port 980 rather ...
    (microsoft.public.windowsce.platbuilder)
  • Re: tftp of image
    ... Do you try to use the Ip address of your target device as the host ... I have some experience of mofying the EBoot that using port 69 as the TFTP ...
    (microsoft.public.windowsce.platbuilder)
  • Re: tftp of image
    ... boot.bin in your local directory. ... execute the tftp in the folder that contain the boot.bin. ... > Using host name from ipconfig/all is the only host name that ... >> server port, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Weirdest ever TFTP problem!
    ... I have, out of sheer frustration, rebooted the TFTP ... server host, ... > A snoop started on the jumpstart server, when the host to be jumpstarted ...
    (comp.unix.solaris)
  • Re: CE5.0 Command line tools
    ... TFTP server on the host end... ... You really mean TFTP *client* on the host end, ... I know in CE4.0 it was possible to download an OS to a CEPC ...
    (microsoft.public.windowsce.platbuilder)
Loading