Re: activesync not connecting over serial

I tried it both ways. I only saw the "CLIENT" signal when I attached to it via Hyperterminal without using the null cable. WHen I used the null cable, I saw nothing in hyperterminal.

T

<ctacke/> wrote: 
You're using a null-modem cable to connect?

-Chris


"Thomas Spellman" <no@xxxxxxxxx> wrote in message news:%23fG76JRrFHA.1168@xxxxxxxxxxxxxxxxxxxxxxx

Hi all,

I've included the ActiveSync catalog item into the platform image, and when I run repllog.exe on the device via the "target->run programs" menu of PB, I see a "CLIENT" message sent out repeatedly via the COM1 serial port, but when I have my host computer connected to that serial port, and I run the "get connected" utility of ActiveSync, it doesn't make the connection. I'm using ActiveSync 3.8.0 on the workstation and CE 5.0 on the device.

What's wrong?

T 



.

Relevant Pages

  • Re: what does "DeviceArrayIndex" registry value for? and ActiveSyn
    ... Bruce.Eitman AT EuroTech DOT com ... ActiveSync. ... If my serial connection is only with RX, TX and GND, anyway to use ... I'm setting a serial port and there's a registry value as below. ...
    (microsoft.public.windowsce.embedded)
  • Re: USB Function Driver ERROR !
    ... The Activesync connection is using a virtual serial port over the physical ... USB connection. ...
    (microsoft.public.windowsce.embedded)
  • Re: ActiveSync components to include in image ?
    ... It must have some sort of local connection option, ... To add support for ActiveSync in PB, you simply open the Platform Manager ... It must must use serial port. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: what does "DeviceArrayIndex" registry value for? and ActiveSyn
    ... If my serial connection is only with RX, TX and GND, anyway to use ActiveSync? ... hardware information was given, one entry per port. ... I could open a serial port and read/write; ...
    (microsoft.public.windowsce.embedded)
  • Re: Make serial data available over TCP
    ... > port to the fifo. ... > connection is made would read from the fifo and write to the network ... Run this program with stdin redirected from the serial port. ... You also need to decide what to do if a client is too slow to keep up. ...
    (comp.unix.programmer)
Loading