Re: How TO configure ActiveSync for working via Ehernet(TCP/IP)

Thank Paul G. Tobey
Follow you suggestion , I had managed to start server with manual!
It's such a good convenience that take fewer time at starting server for
remote tools and debug.

I created a dialog program which can help me starting cemgrc server with the
ip and port settings, that make the connection so easy!

Thanks for your help!
regard


"Paul G. Tobey [eMVP]" wrote:

> If all you're doing is using debug and remote tools, forget about AS.
> Configure the Platform Manager entry for your platform for TCP/IP Transport
> and for Manual Server. Set the Fixed Port option on the TCP/IP Transport
> (and choose an unused port on your desktop machine which is not blocked by
> the firewall, etc.). When you attempt to connect to the device for
> debugging or with a remote tool, a dialog will be displayed on the PC giving
> you a set of parameters to run a program that should be on your device. If
> you've set the fixed port option, those parameters never change, so you can
> create a batch file or a shortcut on the device to do it and easily
> establish the connection.
>
> Again, forget about AS, if all you want to do is debug and remote tools.
> It's a waste of time.
>
> Paul T.
>
> "zhengjun" <zhengjun@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:7C183776-B9C3-494B-8066-415D99363060@xxxxxxxxxxxxxxxx
> > Thank you Paul G. Tobey and Gpeica Chen !
> > I use ActiveSync just to debug and use remote tools from EVC.
> > I have succeeded in implementing the Activesync over serial port. Now I
> > want to spare this serial port for normal use, while use the ethernet
> > controler for ctiveSync instead .
> > Shall I have to first create a partnership between the device and the
> > desktop machine over serial? After that I could synchronization though
> > ethernet !
> >
> > Just using ethernet for the communication channel for ActiveSync, is the
> > key
> > problem.
> > I'm fuzzy about how it detects the Sync signal, and which channel they use
> > for communication through the ethernet.
> > And I want to know whether the platform and MS ActiveSync 3.5 both surport
> > this capability, and the way how it implements the device-independent
> > connection.
> >
> >
> > Thanks!
> >
> > "Paul G. Tobey [eMVP]" wrote:
> >
> >> What are you trying to implement with this capability? I'll tell you
> >> immediately that, if you're just trying to use Ethernet to debug and use
> >> remote tools from eVC, you can forget about AS and just use the Manual
> >> Server type of communication. You can have that working in a few
> >> minutes,
> >> whereas AS over Ethernet is going to take a while.
> >>
> >> If you're planning to actually use AS for things like synchronization
> >> between a partner desktop machine and the device, installation of
> >> programs
> >> to the device, etc., then you need to first establish a partnership
> >> between
> >> the device and the desktop machine over serial or USB AS. Have you done
> >> that? Once you have the partnership, I'm a little fuzzy on the details,
> >> but
> >> you'll want to run repllog.exe /remote, rather than just letting
> >> repllog.exe
> >> run when the serial or USB connection is plugged in or running it
> >> manually
> >> with no parameters.
> >>
> >> Paul T.
> >>
> >> "zhengjun" <zhengjun@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >> news:FAE2F450-318D-4B68-B58D-520347399F66@xxxxxxxxxxxxxxxx
> >> > I'm developing embeded system on Wince4.2 .net
> >> > Now I want ActiveSync which work on pc, to connect wince via Ehternet !
> >> > Is there any details ?
> >> > How dos it work on tcp/ip!
> >> >
> >> > Thanks!
> >>
> >>
> >>
>
>
>
.

Relevant Pages

  • Re: URGENT - InvalidOperationException on UDP ReceiveFrom call in
    ... >>> server connects to the Windows CE device with a stream socket? ... Wireless Ethernet? ... >>> Paul T. ... processor, serial port, ethernet connector, display connector and one ...
    (microsoft.public.dotnet.framework.compactframework)
  • Re: how to host my own DNS for websites?
    ... I have everything about port 53 opened on my firewall but still when i check ... "Paul" wrote: ... On the other hand since I am not big hosting company and ... >> I boot my server from time to time, I really like the idea having my DNSes ...
    (microsoft.public.win2000.dns)
  • Re: Switching between Airport and wired Ethernet
    ... non-working Ethernet en0 port. ... I removed the Ethernet connection ... Maybe in "Mac OS X Update" this will be fixed. ... The "Server may not exist" message refers to an Ethernet server. ...
    (comp.sys.mac.system)
  • Re: WinCE 5.0 FTP server customization question...
    ... Paul --- ... Rebuilding the FTP server is definitely a possibility, ... registry-based way to change the port; ...
    (microsoft.public.windowsce.platbuilder)
  • Re: need help with the connection string
    ... > server are running on port 80). ... I'd like to read up on the subject of how to connect a web server to a SQL ... Paul ...
    (microsoft.public.access.dataaccess.pages)