Re: adding and tracing RealTek RTL8139

THis is my debug output on Com1

EBOOT:
----------
RTL8139Init():: BaseIO[0xD800] : MemOffset[0x1]
RTL8139Init():: TxBuff[0x19C000] - RxBuff[0x19D800] - LastRx[0x1AD7FF]
RTL8139Init:: MAC = 00-50-B7-F0-C5-07
RTL8139 ethdbg library: AutoNegotiate..
RTL8139:: RTL8139HWSetMCRegs():: Set all to 0x00
Returned MAC Address:00:50:B7:F0:C5:07
System ready!
Preparing for download...
OEMPreDownload  ucLoaderFlags is 0
Using device name: CEPC50439
Using static IP address: B800A8C0
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Locked Down Link 1
Src IP 192.168.0.184 Port 0400   Dest IP 192.168.0.10 Port 04E8
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x220000  Length=0x1408768


NK.BIN:
----------
..snip.

KITL: Leaving polling mode...
KITL Checking client registrations
+RegisterClientPart2: Id 0x00000000
KITL Timer thread started, (hTh: 0x05FDBF96, pTh: 0x85FD0800)
-RegisterClientPart2
+RegisterClientPart2: Id 0x00000001
-RegisterClientPart2
KITL Creating IST
KITL Interrupt thread started (hTh: 0x05FD0F9E, pTh: 0x85FCE800), using SYSINTR
25
Enabling adapter ints...
+RTL8139EnableInts()..
-RTL8139EnableInts()..
VBridge:: VB_INITIALIZED returns [1]
VBridge:: RESET_BUFFER received.
VBridge:: built on [Aug 2 2005] time [16:04:23]
VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes
Tx buffer [0xA168FE80] to [0xA1693E80].
Rx buffer [0xA1693EA0] to [0xA1697EA0].
RTL8139:: MulticastRegs set to : 0-0-0-0-0-0-0-0
RTL8139:: Set Ndis filter [0xB] -> [0x101E]
VBridge:: Current VMini packet filter = [0xB]
RTL8139:: MulticastRegs set to : 0-0-0-80-0-0-0-0


Now I can ping the target board,
but there is no ethernet device in control panel on the target.
What is wrong ?

TIA
.