Re: Build and Sysgen

Thanks for the answers.
I am not sure what has been installed in the system. Please tell me how I
can tell if shared source was installed?

Paul
--
Paul A. Lowe
Sr Project Engineer
Eaton Electrical


"Chris Tacke, eMVP" wrote:

> I think the land mine is when you have shared source installed. If not,
> you're ok, but when it is present, everything goes south.
>
> --
> Chris Tacke
> Co-founder
> OpenNETCF.org
> Are you using the SDF? Let's do a case study.
> Email us at d c s @ o p e n n e t c f . c o m
> http://www.opennetcf.org/donate
>
>
> "Dean Ramsier" <ramsiernospam@xxxxxxxxxx> wrote in message
> news:OEcvF8zpFHA.1416@xxxxxxxxxxxxxxxxxxxxxxx
> > Some people have had problems where the Build and Sysgen ended up
> > corrupting
> > the build tree. Not sure exactly why, it happens sometimes and not
> > others.
> > If you haven't gotten unresolvable build / compile issues, then you don't
> > have to worry about a reinstall. However, don't do a build and sysgen
> > anymore, you're playing with fire.
> >
> > --
> > Dean Ramsier - eMVP
> >
> >
> > "Paul A. Lowe" <PaulALowe@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:66662230-5F6C-432C-99F6-A1B5E4D9E275@xxxxxxxxxxxxxxxx
> >> Working on CE 5 OS for and X86 VIA based product. Have been reading the
> >> newsgroups and noticed postings on Build and Sysgen option. If I read
> >> them
> >> correctly, IF you use Build and Sysgen then you must uninstall PB for CE5
> > and
> >> reinstall it. Is this true?
> >>
> >> Note: I have gone out to VIA and down loaded the BSP and driver files and
> >> installed them per VIA's instructions. After that I have built a minimal
> > X86
> >> CEPC OS and run Build and Sysgen. The reason I was reading on Build and
> >> Sysgen is I see a warning or two show up every now and then after I have
> > run
> >> Build and Sysgen.
> >>
> >> Paul
> >> --
> >> Paul A. Lowe
> >> Sr Project Engineer
> >> Eaton Electrical
> >
> >
>
>
>
.

Relevant Pages

  • Re: community projects ??
    ... Here's a page that mentions at least one of the community projects for ... Windows CE: ... Paul T. ... Is there a shared source repository for source? ...
    (microsoft.public.windowsce.embedded)
  • Re: How to Access Window Messages
    ... Paul G. Tobey [eMVP] ha scritto: ... I also test the IntPtr values and here you the results: ...
    (microsoft.public.windowsce.app.development)
  • Re: 5.0 much slower than 4.2
    ... Paul T. ... that would be to put it in the Platform folder corresponding to your BSP, ... "Bruce Eitman (eMVP)" wrote: ... beitman AT applieddata DOT net ...
    (microsoft.public.windowsce.platbuilder)
  • Re: 5.0 much slower than 4.2
    ... Paul T. ... that would be to put it in the Platform folder corresponding to your BSP, ... "Bruce Eitman (eMVP)" wrote: ... beitman AT applieddata DOT net ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Build and Sysgen
    ... Chris Tacke ... > have to worry about a reinstall. ... Have been reading the ... >> Paul A. Lowe ...
    (microsoft.public.windowsce.platbuilder)