Re: build -c from Mystery Solved

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Thank you. I will go further into the tutorials and before I hit loadcepc.exe
I will then try to follow Bryan's posting.

Paul
--
Paul A. Lowe
Sr Project Engineer
Eaton Electrical


"Paul G. Tobey [eMVP]" wrote:

> Yes, it sounds like you need to make sure that you've built the OS (Sysgen),
> at least once before trying to modify a single element. You might actually
> get to the point where you can load the OS from a hard disk with DOS
> (loadcepc.exe), before moving on to that posting.
>
> Paul T.
>
> "Paul A. Lowe" <PaulALowe@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:BC67E00B-29C5-4837-AC06-89E16923B902@xxxxxxxxxxxxxxxx
> > Oh, forgot to answer all your questions.
> > In step 1 of Bryans posting he advises a change in the
> > READ_BUFFER_LENGTH_MAX value in fat.h.
> > In step 2 he then says to rebuild the bootloader by running build -c in
> > the
> > WinCE500\Public\common\oak\csp\x86\biosloader\loader directory.
> >
> > This is where I am at.
> >
> > Paul
> > --
> > Paul A. Lowe
> > Sr Project Engineer
> > Eaton Electrical
> >
> >
> > "Bruce Eitman (eMVP)" wrote:
> >
> >> Have you fully built the platform at least once? Any other errors
> >> proceed
> >> that?
> >>
> >> --
> >> Bruce Eitman (eMVP)
> >> Senior Engineer
> >> beitman AT applieddata DOT net
> >>
> >> Applied Data Systems
> >> www.applieddata.net
> >> An ISO 9001:2000 Registered Company
> >> Microsoft WEP Gold-level Member
> >>
> >>
> >> "Paul A. Lowe" <PaulALowe@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >> news:C2DADCDF-0282-4475-A38F-7B3B085D4BE0@xxxxxxxxxxxxxxxx
> >> > Thank you Bruce.
> >> > I ran it from PB->BuildOS->Open release Directory.
> >> > Have an Nmake error. The command window shows:
> >> > BUILD: [01:0000000061:ERRORE] NMAKE : U1073: don't know how to make
> >> > 'C:\WINCE500\public\common\oak\lib\x86\debug\iniparse.lib'
> >> > BUILD: [01:0000000063:ERRORE] NMAKE.exe -i -c BUILDMSG=Stop. NOLINK=1
> >> > NOPASS0=1 failed -rc = 2
> >> >
> >> > What am I doing wrong?
> >> >
> >> > Paul
> >> >
> >> > --
> >> > Paul A. Lowe
> >> > Sr Project Engineer
> >> > Eaton Electrical
> >> >
> >> >
> >> > "Bruce Eitman (eMVP)" wrote:
> >> >
> >> >> You need some environment variables set correctly to do that. The
> >> >> easiest
> >> >> way would be to use the Platform Builder Build\Open Release... menu.
> >> >> This
> >> >> opens a window with the environment set up, but you will need to
> >> >> change
> >> >> directories to the directory that you want to build.
> >> >>
> >> >> --
> >> >> Bruce Eitman (eMVP)
> >> >> Senior Engineer
> >> >> beitman AT applieddata DOT net
> >> >>
> >> >> Applied Data Systems
> >> >> www.applieddata.net
> >> >> An ISO 9001:2000 Registered Company
> >> >> Microsoft WEP Gold-level Member
> >> >>
> >> >>
> >> >> "Paul A. Lowe" <PaulALowe@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >> >> news:08EBC17F-0439-4AFC-A6FC-7139E1268A6B@xxxxxxxxxxxxxxxx
> >> >> > Hi
> >> >> > New to WinCe.
> >> >> > Am trying to follow the instructions Bryan Everly posted in Mystery
> >> >> > Solved.
> >> >> > Problem I am having is step #2. I have tried to run the build -c
> >> >> > command
> >> >> > in
> >> >> > Command Prompt window and from the Run command off the Start bar.
> >> >> > Both
> >> >> > come
> >> >> > back telling me there is no program named build. I have searched
> >> >> > through
> >> >> > the
> >> >> > directories and found a build.exe and build.bat. Not sure if either
> >> >> > of
> >> >> > these
> >> >> > is correct and if so how to use the correct one. Could someone dumb
> >> >> > down
> >> >> > the
> >> >> > instructions so I can do this? Please???
> >> >> >
> >> >> > Paul
> >> >> > --
> >> >> > Paul A. Lowe
> >> >> > Sr Project Engineer
> >> >> > Eaton Electrical
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>
.

Relevant Pages

  • Re: SwingWorker.execute() does nothing
    ... Paul G Derbyshire of Ottawa Canada. ... This statement is neither about Java nor about anybody posting here, ... in this thread or in this entire newsgroup ... I am trying to convince you to stop making all kinds of stupid and off-topic posts to this newsgroup, and to take your dispute with Paul to a more appropriate forum. ...
    (comp.lang.java.programmer)
  • Re: MI5 freak out...
    ... nanny wrote: ... Paul, I did the next best thing: after you heard from weirdo's server, I ... If a user on Altopia is causing it, we may disable their posting ...
    (alt.med.fibromyalgia)
  • Re: FUCK THIS MOTHER FUCKING GROUP, GAWD DAMMIT
    ... He bases it on an>incident two years prior to his attack, during a time when there were>several people who were taunting me that they were going to "out" me and>they were soliciting others to write to my publisher and complain about>me. ... and as I say it was TWO YEARS prior to what Paul>did. ... I don't really think it was the posting of your name an address that bothered you all that much. ... >And here's another clue for you; Just because someone doesn't back down>when another person attacks them and threatens further dire>consequences, that doesn't justify the further dire consequences,>especially when it involves criminal activity. ...
    (alt.support.chronic-pain)
  • Re: OT: sock puppet and his bitch!
    ... >>> paul ... >>that obsessive gun nuts always exhibit. ... > Posting from the last bastion of freedom and democracy. ... > Proud Owner of LV, Paul Know less, John Boy Wheaton, Clod ...
    (alt.guitar.amps)
  • Re: Dllhost.exe Memory leaks
    ... Look Paul... ... "Paul Lynch" wrote in message ... >>or else I will start posting remarks about your suggestions. ... > But if you insist on posting suspect information (such as your ...
    (microsoft.public.inetserver.iis)