Remote Tools not connecting
- From: "Benoît Bousquet" <bbousquet@xxxxxxxxxxxxxxxx>
- Date: Tue, 9 Aug 2005 11:34:18 -0400
Greetings.
Using PB 4.2. Current setup:
- development PC with 2 network cards (one to main company network, the
other connected to target PC with a crossover cable, using address
192.168.10.1)
- target PC with 1 network card (192.168.10.2 set on the boot floppy,
connected to development PC with crossover cable)
I built a pretty basic CEPC/Mobile Handheld image, have configured the PB
remote connection as Ethernet for both Download and Kernel Transport, and my
target PC downloads and boots the image successfully - I also get a ton of
traces, as it should be.
So far, all is good. However, I can't seem to be able to connect to the
target PC with ANY of the remote tools. I'm somewhat confused as to the
steps required. I tried (I believe) all the combinations in the remote
tools' connection panels, to no avail.
I have a NULL cable (serial) lying around if it can actually help.
--
-----
Benoît Bousquet
(e-mail address is invalid)
.
- Follow-Ups:
- Re: Remote Tools not connecting
- From: Dean Ramsier
- Re: Remote Tools not connecting
- Prev by Date: Converting CEDB to EDB format
- Next by Date: tiny kernel startup crash
- Previous by thread: Converting CEDB to EDB format
- Next by thread: Re: Remote Tools not connecting
- Index(es):
Relevant Pages
|
