Unable to setup the desktop computer for NDIS performance test
- From: "maiya" <vickyec_2000@xxxxxxxxx>
- Date: Fri, 29 Jul 2005 13:19:10 +0530
Hi All,
I am trying to install the MS_NDP protocol driver on the supporting desktop
computer(windows 2000)
and it is getting installed successfully too.
after running the command
tux -o -d perf_ndis -c "-ndisd -nounbind \Device\{<GUID>}"
i have noted the bind name of the network interface whose display name
matches the device name displayed in Network Connections
of Control Panel.
Display Name : Broadcom NetXtreme Gigabit Ethernet for hp
Bind Name : \Device\{B9AE70C0-1582-410F-931A-ACC7863A6323}
now when i run the command
tux -o -d perf_ndis -c
"-ndisd -nounbind\Device\{B9AE70C0-1582-410F-931A-ACC7863A6323}"
i get error with code 50 as mentioned below.
ShellProc(SPM_LOAD_DLL, ...) called
Command Line:
"-ndisd -nounbind\Device\{B9AE70C0-1582-410F-931A-ACC7863A6323}".S
hellProc(SPM_REGISTER, ...) called
ShellProc(SPM_START_SCRIPT, ...) called
ShellProc(SPM_BEGIN_GROUP, ...) called
ShellProc(SPM_BEGIN_TEST, ...) called
perf_ndis ERROR: Failed unbind protocols from
adapter -nounbind\Device\{B9AE70C0
-1582-410F-931A-ACC7863A6323} with code 50
perf_ndis ERROR: Failed bind protocols to
adapter -nounbind\Device\{B9AE70C0-158
2-410F-931A-ACC7863A6323} with code 50
ShellProc(SPM_END_TEST, ...) called
ShellProc(SPM_END_GROUP, ...) called
ShellProc(SPM_UNLOAD_DLL, ...) called
can anyone tell me how to resolve this issue.
Thanks in advance,
maiya
.
- Prev by Date: losing ACK!! Is it a problem???(TFTP: Desktop losing ACK, block number = 1467, Ack again)
- Next by Date: CE 4.2 BT-Stack
- Previous by thread: losing ACK!! Is it a problem???(TFTP: Desktop losing ACK, block number = 1467, Ack again)
- Next by thread: CE 4.2 BT-Stack
- Index(es):
Relevant Pages
|
|
