Re: Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
- From: "Dean Ramsier" <ramsiernospam@xxxxxxxxxx>
- Date: Thu, 28 Jul 2005 09:11:20 -0400
You've implemented the hive registry, and it's apparently not been done
correctly for this device. First remove the hive registry component (make
sure you do a CLEAN sysgen after removing it) and get your device running.
After it's up to your satisfaction you can then try to get the hive
implemented. It's difficult enough to do anyway, and shouldn't be attempted
on the first pass at board bringup.
Note that you can probably just use the flat display driver, it will
probably work fine.
--
Dean Ramsier - eMVP
"Avi Shmidman" <AviShmidman@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6177BE6C-878C-428F-8FC4-3363B562B6F5@xxxxxxxxxxxxxxxx
> Hello All,
> Our target system is the TME PC104-P3 embedded computer. We have built a
> debug nk.bin which runs successfully on our standard PC. However, when we
> download it to the TME PC104-P3, something goes wrong. The bootloader
> succeeds in making the connection, the nk.bin is downloaded, and the
debugger
> connects. At that point, though, nothing more is displayed, and the kernel
> debugger indicates some errors (copied below). Now, in truth, I have not
yet
> found video drivers for the board (it uses the C&T 69030; TME does not
supply
> the drivers, and Asiliant does not have them on their website either -
anyone
> have any ideas?), but it seems to me that something more is going wrong.
> The output from the kernel debugger is as follows:
>
> The Kernel Debugger connection has been established (Target CPU is X86).
> Target name: CE Device
> Probe name: KdStub
> Binary Image should be loaded at 0x80220000 / Data relocated at 0x82277000
> Loaded symbols for
> 'C:\WINCE500\PBWORKSPACES\TEST2\RELDIR\CEPC_X86_DEBUG\NK.EXE'
> Loaded symbols for
> 'C:\WINCE500\PBWORKSPACES\TEST2\RELDIR\CEPC_X86_DEBUG\KD.DLL'
> Loaded symbols for
> 'C:\WINCE500\PBWORKSPACES\TEST2\RELDIR\CEPC_X86_DEBUG\OSAXST1.DLL'
> Loaded symbols for
> 'C:\WINCE500\PBWORKSPACES\TEST2\RELDIR\CEPC_X86_DEBUG\OSAXST0.DLL'
> Loaded symbols for
> 'C:\WINCE500\PBWORKSPACES\TEST2\RELDIR\CEPC_X86_DEBUG\HD.DLL'
> 4294767356 PID:3fdf002 TID:3fdf1de 0x83fdf030: first = 01590000, last =
> 02000000, SharedDllBase = 02160000
> 4294767358 PID:3fdf002 TID:3fdf1de 0x83fdf030: >>> Loading module
> coredll.dll at address 0x03F40000-0x03FF4000 (RW data at
> 0x01FFE000-0x01FFF765)
> Loaded symbols for
> 'C:\WINCE500\PBWORKSPACES\TEST2\RELDIR\CEPC_X86_DEBUG\COREDLL.DLL'
> 4294767372 PID:3fdf002 TID:3fdf1de 0x83fdf030: Did not find emulation code
> for x86... using floating point hardware.
> 4294767473 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: >>> Loading module
> coredll.dll at address 0x03F40000-0x03FF4000 (RW data at
> 0x01FFE000-0x01FFF765)
> 4294767487 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: >>> Loading module
> filesys.exe at address 0x04010000-0x04083000
> Loaded symbols for
> 'C:\WINCE500\PBWORKSPACES\TEST2\RELDIR\CEPC_X86_DEBUG\FILESYS.EXE'
> 4294767500 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: CertMod.dll not found,
> using old OEM Trust Model
> 4294767501 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FileSystem Starting -
> starting with clean file system
> 4294767503 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FS: initializing ROM/RAM
> file system
> 4294767503 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: SC_CreateAPIHandle:
pvData
> == NULL
> 4294767504 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FS: Registering file
system
> ROM, index 2, flags 0x00000031
> 4294767504 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FS: Mount complete (ROM,
> index 2, flags 0x00000031)
> 4294767506 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: >>> Loading module
> eventlog.dll at address 0x02FD0000-0x02FEB000 (RW data at
> 0x01E61000-0x01E618B4)
> Loaded symbols for
> 'C:\WINCE500\PBWORKSPACES\TEST2\RELDIR\CEPC_X86_DEBUG\EVENTLOG.DLL'
> 4294767519 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: EventLog:: EventLogInit()
> called
> 4294767520 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: OEMIoControl: Unsupported
> Code 0x101008c - device 0x0101 func 35
> 4294767521 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FSVOL: Opening existing
> volume
> 4294767522 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FSVOL: Volume heap
already
> initialized
> 4294767522 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FSREG: Mounted ROM
portion
> of boot registry
> 4294767523 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FSVOL: Creating clean
> virtual volume
> 4294767523 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FSVOL: Initializing
volume
> heap
> 4294767525 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FSREG: Mounted RAM
portion
> of boot registry
> 4294767526 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: PCIReg(key: , device:
0/0/0)
> 4294767527 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FS: Creating signal event
> SYSTEM/DevMgrApiSetReady
> 4294767528 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FS: Creating signal event
> SYSTEM/PowerManagerReady
> 4294767528 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FS: Creating signal event
> SYSTEM/GweApiSetReady
> 4294767529 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FS: Creating signal event
> ReleaseFSD
> 4294767529 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FSREG: Unable to read
value
> "Start DevMgr" under HKEY_LOCAL_MACHINE\init\BootVars
> 4294767530 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: FILESYS: NOT starting
> device manager to reach system hive.
> 4294767530 PID:e3fc8c1a TID:e3fc8bea 0x83fc8a3c: OEMIoControl: Unsupported
> Code 0x10100d4 - device 0x0101 func 53
>
>
>
>
.
- Follow-Ups:
- Re: Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
- From: Avi Shmidman
- Re: Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
- References:
- Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
- From: Avi Shmidman
- Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
- Prev by Date: FSSCTL_FLUSH_BUFFERS bug
- Next by Date: Re: Error with CreateProcess API
- Previous by thread: Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
- Next by thread: Re: Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
- Index(es):
Relevant Pages
|
|
