RE: wince v5, PC104 SBC boot connection mgr to target via serial
- From: rschultz2112 <rschultz2112@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 14 Jul 2005 12:10:04 -0700
p.s. you still have to get the serial or eth communication working to use
the interactive debugger on your development machine. old timers already
know this, note is for newbies like me.
--
Rob.
"rschultz2112" wrote:
> I answered my own question.
>
> Rather than mess with the serial port to load the nk.bin; I tinkered with
> the loadcepc program from the boot floppy and then just copied the nk.bin to
> the local hard dirve, then just selected "load from local" on the menu.
> Viola, works perfect.
>
> I hope this helps someone.
> --
> Rob.
>
>
> "rschultz2112" wrote:
>
> > Hi
> >
> > This my first run at loading my target (pc104, single board computer) with a
> > WinCE OS. I'm using the boot floppy, CEPC connection manager on the target
> > device,
> >
> > On the target boot, I select the "Boot CE/PC (serial via sboot.bin)" option,
> > The target screen changes to "Jumping to 0x001358E4", and just sits there.
> >
> > Ok. So I start the Platform builder Download runtime image on my
> > development PC, (serial connection is good, tested with hyperterminal), and
> > its says "Waiting to recieve download request", and "Waiting for BOOTME from
> > CE Device". ?What is BOOTME?
> >
> > So of course I'm not doing something right. I built the OS using the Geode
> > x86 debug. The OS works in the emulator if that matters. Now trying to
> > download it to the target PC. Again the Target PC is a single board
> > computer, PC104, which is a pretty standard x86 PC in most respects.
> >
> > Thank you in advance for any pointers or advice you can share!
> > --
> > Rob.
.
- References:
- wince v5, PC104 SBC boot connection mgr to target via serial
- From: rschultz2112
- RE: wince v5, PC104 SBC boot connection mgr to target via serial
- From: rschultz2112
- wince v5, PC104 SBC boot connection mgr to target via serial
- Prev by Date: Re: where can i find free third-party drivers for wince net?
- Next by Date: Re: where can i find free third-party drivers for wince net?
- Previous by thread: RE: wince v5, PC104 SBC boot connection mgr to target via serial
- Next by thread: Re: where can i find free third-party drivers for wince net?
- Index(es):
Relevant Pages
|