microsoft.public.windowsce.platbuilder

• Thread Index

---

• Re: FTP listing unreadable ?
  • From: Bryan Bassett
• Re: Downloading Image To ARMINTGRATOR board
  • From: Sean Bowles [MS]
• USB Host power management
  • From: Rams
• Re: Unsupported Code message
  • From: Steve
• Re: C++ virtual function compiler issue
  • From: Steve Maillet \(eMVP\)
• Re: C++ virtual function compiler issue
  • From: Paul G. Tobey [eMVP]
• C++ virtual function compiler issue
  • From: DarthDev
• Re: removing unneeded code ?
  • From: Dean Ramsier
• Re: Unsupported Code message
  • From: Joseph Garibaldi
• Re: Converting register val to IRQ no
  • From: Voidcoder
• Re: Converting register val to IRQ no
  • From: Voidcoder
• Re: Remote Admin / Configuration
  • From: casner
• Re: Battery Driver PDD implementation
  • From: Voidcoder
• Re: Win CE 5.0 CEPC and Ali M5273 USB 2.0 Host Controller
  • From: Valter Minute
• Re: Reminder Windows CE .NET chat today
  • From: Voidcoder
• Re: Cisco Aironet 350
  • From: Bruce Eitman \(eMVP\)
• Re: Remote Admin / Configuration
  • From: John Spaith [MS]
• Re: impossible CE SDK installation
  • From: Paul G. Tobey [eMVP]
• Re: Cisco Aironet 350
  • From: Paul G. Tobey [eMVP]
• Re: device SDK not available in VS2003
  • From: Paul G. Tobey [eMVP]
• Re: Mass storage drive vanishing
  • From: Steve Maillet \(eMVP\)
• RDP sound performance (WinCE5.0)
  • From: mfr
• Re: Hive Based Registry Backup
  • From: Me
• Mass storage drive vanishing
  • From: Rams
• Re: Win CE 5.0 CEPC and Ali M5273 USB 2.0 Host Controller
  • From: Potolo
• Re: removing unneeded code ?
  • From: mobilevil
• Re: losing ACK!! Is it a problem???(TFTP: Desktop losing ACK, block number = 1467, Ack again)
  • From: mobilevil
• Hive Based Registry Backup
  • From: ooK
• Unsupported Code message
  • From: Steve
• Re: Converting register val to IRQ no
  • From: ms
• Re: removing unneeded code ?
  • From: Dean Ramsier
• Re: removing unneeded code ?
  • From: mobilevil
• USB Host Mass storage issue
  • From: embguy
• Cisco Aironet 350
  • From: Tweeeek
• Re: losing ACK!! Is it a problem???(TFTP: Desktop losing ACK, block number = 1467, Ack again)
  • From: Darshan_om
• Re: removing unneeded code ?
  • From: Dean Ramsier
• device SDK not available in VS2003
  • From: Midge
• Re: losing ACK!! Is it a problem???(TFTP: Desktop losing ACK, block number = 1467, Ack again)
  • From: Mike Slot
• Re: Win CE 5.0 CEPC and Ali M5273 USB 2.0 Host Controller
  • From: Valter Minute
• Re: losing ACK!! Is it a problem???(TFTP: Desktop losing ACK, block number = 1467, Ack again)
  • From: mobilevil
• Re: removing unneeded code ?
  • From: mobilevil
• Win CE 5.0 CEPC and Ali M5273 USB 2.0 Host Controller
  • From: Potolo
• Geode Resolution 800x480.
  • From: junho.yoon
• Re: Reminder Windows CE .NET chat today
  • From: Shutruk Nahunte
• removing unneeded code ?
  • From: mobilevil
• CE 4.2 BT-Stack
  • From: Bernd
• Unable to setup the desktop computer for NDIS performance test
  • From: maiya
• losing ACK!! Is it a problem???(TFTP: Desktop losing ACK, block number = 1467, Ack again)
  • From: Darshan_om
• losing ACK!! Is it a problem???(TFTP: Desktop losing ACK, block number = 1467, Ack again)
  • From: Darshan_om
• Re: impossible CE SDK installation
  • From: Shutruk Nahunte
• Re: about real-time
  • From: Maverick
• [BUG] SAPI 5.0 of Windows CE 5.0
  • From: Y.D. Won
• Re: Kernal Debug enabled cannot boot up CEPC
  • From: Steve Maillet \(eMVP\)
• Re: Kernal Debug enabled cannot boot up CEPC
  • From: JayC
• Re: console io
  • From: Voidcoder
• console io
  • From: Voidcoder
• CSR vendor-specific commands over BCSP transport
  • From: Josh Karabin
• Re: about real-time
  • From: Mike Slot
• Remote Admin / Configuration
  • From: casner
• PB5.0 Internal error during ParseCommandLine
  • From: Mike Slot
• Converting register val to IRQ no
  • From: ms
• Re: NOR flash
  • From: Mo
• Battery Driver PDD implementation
  • From: buckyllama
• Re: impossible CE SDK installation
  • From: Paul G. Tobey [eMVP]
• Re: impossible CE SDK installation
  • From: Shutruk Nahunte
• Re: Reminder Windows CE .NET chat today
  • From: Shutruk Nahunte
• Memory map file limit in VM
  • From: JF Morin
• Re: XScale BSP in platform builder
  • From: Paul G. Tobey [eMVP]
• Re: ARM compiler bug?
  • From: Danny
• RE: ARM compiler bug?
  • From: anonymous
• Re: Geode Display corruption
  • From: Albert
• Re: CEC File with Platform Builder 5
  • From: Chris Tacke, eMVP
• XScale BSP in platform builder
  • From: easy2love
• What should be loaded first BTSCOSND(bluetooth audio driver) or BTD.dll bluetooth stack.
  • From: Darshan_om
• Re: Kernal Debug enabled cannot boot up CEPC
  • From: Steve Maillet \(eMVP\)
• Re: How to change the relation of building OS in WinCE 5.0?
  • From: Steve Maillet \(eMVP\)
• Re: CEC File with Platform Builder 5
  • From: Steve Maillet \(eMVP\)
• Re: XScale sleep mode
  • From: AJM42
• Re: XScale sleep mode
  • From: AJM42
• ARM compiler bug?
  • From: Danny
• Re: Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
  • From: Avi Shmidman
• Re: right click menu ( no context menu for stylus ) problem? help !
  • From: Dean Ramsier
• Re: How to change the relation of building OS in WinCE 5.0?
  • From: Dean Ramsier
• Re: extract file from nk.bin / nb0
  • From: Dean Ramsier
• Re: Error with CreateProcess API
  • From: Zhongwei Wang
• Re: Error with CreateProcess API
  • From: Bruce Eitman \(eMVP\)
• Re: Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
  • From: Dean Ramsier
• FSSCTL_FLUSH_BUFFERS bug
  • From: anonymous
• Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
  • From: Avi Shmidman
• RE: Geode Display corruption
  • From: junho.yoon
• Re: extract file from nk.bin / nb0
  • From: Danny
• Re: CEC File with Platform Builder 5
  • From: Valter Minute
• Kernal Debug enabled cannot boot up CEPC
  • From: JayC
• Platform Builder does not start download when using sboot.bin
  • From: JohnJ
• CEC File with Platform Builder 5
  • From: Stefano
• Re: right click menu( no contextmenu for stylus ) problem?
  • From: Peter K.
• Downloading Image To ARMINTGRATOR board
  • From: Darshan_om
• RE: CETK IR Port Test
  • From: "Fernando Gonzalez [MS]"
• Geode Display corruption
  • From: Albert
• extract file from nk.bin / nb0
  • From: Danny
• Error with CreateProcess API
  • From: liawsw
• Re: bootme with 5.0
  • From: K. S. Huang
• Re: How to change the relation of building OS in WinCE 5.0?
  • From: Yu
• right click menu ( no context menu for stylus ) problem? help !
  • From: airen
• How chage imgfs compression type "LZX" to "XPR".
  • From: Jun Meng
• Re: about real-time
  • From: Steve Maillet \(eMVP\)
• about real-time
  • From: Maverick
• right click menu( no contextmenu for stylus ) problem?
  • From: airen
• Re: How to add a virtual WAV driver ?
  • From: Steve Maillet \(eMVP\)
• RE: Issues with Blutooth-netwok Component
  • From: Greg Scott [MS]
• Re: mui_sz loading performance
  • From: anonymous
• Re: How to add a virtual WAV driver ?
  • From: Lefthand
• Re: Error message is showed by media player
  • From: bird
• Re: Reminder Windows CE .NET chat today
  • From: Paul G. Tobey [eMVP]
• Re: impossible CE SDK installation
  • From: Paul G. Tobey [eMVP]
• Re: Reminder Windows CE .NET chat today
  • From: Chris Tacke, eMVP
• Re: impossible CE SDK installation
  • From: Shutruk Nahunte
• Re: impossible CE SDK installation
  • From: Paul G. Tobey [eMVP]
• Re: impossible CE SDK installation
  • From: Shutruk Nahunte
• Re: impossible CE SDK installation
  • From: Paul G. Tobey [eMVP]
• Re: Reminder Windows CE .NET chat today
  • From: Shutruk Nahunte
• Re: NOR flash
  • From: Bruce Eitman \(eMVP\)
• Re: Issue when changing IP address from Static to DHCP
  • From: Paul G. Tobey [eMVP]
• Re: impossible CE SDK installation
  • From: Shutruk Nahunte
• Re: How to include cmd and type command
  • From: John Spaith [MS]
• Re: Error message is showed by media player
  • From: Paul G. Tobey [eMVP]
• Re: impossible CE SDK installation
  • From: Paul G. Tobey [eMVP]
• Re: Reminder Windows CE .NET chat today
  • From: Shutruk Nahunte
• Re: NOR flash
  • From: Mo
• Re: Reminder Windows CE .NET chat today
  • From: Michael AMSELLEM
• Re: USBFN storage device
  • From: Mike Engel
• Re: impossible CE SDK installation
  • From: Shutruk Nahunte
• Re: How to include cmd and type command
  • From: Bruce Eitman \(eMVP\)
• Re: Reminder Windows CE .NET chat today
  • From: Shutruk Nahunte
• Re: USBFN storage device
  • From: Charles Peterson
• Re: USBFN storage device
  • From: Mike Engel
• Re: CPU Support package issue
  • From: Dean Ramsier
• Re: Manual startup sever with TCP/IP
  • From: Dean Ramsier
• Re: CETK IR Port Test
  • From: Dean Ramsier
• Re: CETK doubt
  • From: Dean Ramsier
• Re: How to include cmd and type command
  • From: Dean Ramsier
• Re: USBFN storage device
  • From: Dean Ramsier
• bootme
  • From: keshav
• Re: USBFN storage device
  • From: Mike Engel
• Re: PCL Printing in WinCE5
  • From: Michael AMSELLEM
• Keyboard driver error (sorry for the unintentional cross post)
  • From: Bill T
• How to include cmd and type command
  • From: Rams
• Re: NOR flash
  • From: Bruce Eitman \(eMVP\)
• bootme with 5.0
  • From: keshav
• Re: Difference b/w CSP Drivers and BSP Drivers
  • From: Steve Maillet \(eMVP\)
• Re: How to change the relation of building OS in WinCE 5.0?
  • From: Steve Maillet \(eMVP\)
• what to be implemented for power management in USB drivers
  • From: em_er
• CETK doubt
  • From: san
• CETK IR Port Test
  • From: san
• windows media player in wince 5.0 streaming error message
  • From: maiya
• How to change the relation of building OS in WinCE 5.0?
  • From: Yu
• Printing Ascii text
  • From: Rams
• Re: Manual startup sever with TCP/IP
  • From: ms
• Re: How to backup platform builder settings
  • From: wrx03ppp
• Re: Deploy from VS2005 to Windows CE 5
  • From: Stefano
• Re: Deploy from VS2005 to Windows CE 5
  • From: Stefano
• Re: impossible CE SDK installation
  • From: Shutruk Nahunte
• Problem with ActiveSync Partnership using 2 LAN connections
  • From: Peter K.
• Re: mui_sz loading performance
  • From: Peter K.
• Difference b/w CSP Drivers and BSP Drivers
  • From: soorya
• Re: Missing tools to install SDK (PB5.0)
  • From: Shutruk Nahunte
• Re: CPU Support package issue
  • From: Steve Maillet \(eMVP\)
• CPU Support package issue
  • From: Johns
• Active Sync connection with WinCE device
  • From: Manish
• Re: touch screen Calibration problem?help please!
  • From: Steve Maillet \(eMVP\)
• Re: touch screen Calibration problem?help please!
  • From: airen
• Re: Issue when changing IP address from Static to DHCP
  • From: Michael--J
• Error message is showed by media player
  • From: bird
• Re: NOR flash
  • From: Mo
• RE: impossible CE SDK installation
  • From: chuckl
• Re: Missing tools to install SDK (PB5.0)
  • From: Steve Maillet \(eMVP\)
• impossible CE SDK installation
  • From: Shutruk Nahunte
• Re: Missing tools to install SDK (PB5.0)
  • From: Shutruk Nahunte
• Re: Partitioning a Storage Volume isn't working
  • From: Jimbo
• Re: What consume memory on startup?
  • From: samlee
• Re: NOR flash
  • From: Bruce Eitman \(eMVP\)
• Re: Changing a BSP dependency
  • From: Steve Maillet \(eMVP\)
• Re: NOR flash
  • From: Mo
• Re: stupid arm asm question
  • From: mobilevil
• Re: Missing tools to install SDK (PB5.0)
  • From: Steve Maillet \(eMVP\)
• RE: Deploy from VS2005 to Windows CE 5
  • From: PrestonVW
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Voidcoder
• Re: PC/PDA USB transmission question ?
  • From: David Liao \(MS\)
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Voidcoder
• Re: Changing a BSP dependency
  • From: Shutruk Nahunte
• Re: PC/PDA USB transmission question ?
  • From: Voidcoder
• Re: How to backup platform builder settings
  • From: Dean Ramsier
• Re: Missing tools to install SDK (PB5.0)
  • From: Shutruk Nahunte
• Re: Missing tools to install SDK (PB5.0)
  • From: Paul G. Tobey [eMVP]
• Re: Missing tools to install SDK (PB5.0)
  • From: Shutruk Nahunte
• Re: Issue when changing IP address from Static to DHCP
  • From: Paul G. Tobey [eMVP]
• Re: SA1110 vs PXA255
  • From: Chris Tacke, eMVP
• Re: Missing tools to install SDK (PB5.0)
  • From: Paul G. Tobey [eMVP]
• Re: SA1110 vs PXA255
  • From: Tweeeek
• Re: Changing a BSP dependency
  • From: Mike Engel
• Re: Changing a BSP dependency
  • From: Shutruk Nahunte
• Re: Changing a BSP dependency
  • From: Shutruk Nahunte
• Re: Changing a BSP dependency
  • From: Steve Maillet \(eMVP\)
• Re: How to backup platform builder settings
  • From: Steve Maillet \(eMVP\)
• Re: How to backup platform builder settings
  • From: wrx03ppp
• Re: platform builder for bootloader
  • From: Bruce Eitman \(eMVP\)
• Re: Changing a BSP dependency
  • From: Mike Engel
• Re: SA1110 vs PXA255
  • From: Bruce Eitman \(eMVP\)
• Re: Re:How to include CSP
  • From: Steve Maillet \(eMVP\)
• Re: SA1110 vs PXA255
  • From: Steve Maillet \(eMVP\)
• Re: platform builder for bootloader
  • From: Steve Maillet \(eMVP\)
• Re: platform builder for bootloader
  • From: Shutruk Nahunte
• Re: Changing a BSP dependency
  • From: Shutruk Nahunte
• Re: What consume memory on startup?
  • From: JF Morin
• Re: Wince protect resources
  • From: Mike Engel
• SA1110 vs PXA255
  • From: Tweeeek
• platform builder for bootloader
  • From: keshav
• Re: Wince protect resources
  • From: Dean Ramsier
• Re: Re:How to include CSP
  • From: Dean Ramsier
• Re: Wince protect resources
  • From: Mike Engel
• Re: Info needed about CSP
  • From: Dean Ramsier
• Re: Stream driver Power management
  • From: Dean Ramsier
• Re: Wince protect resources
  • From: Dean Ramsier
• Re: How to backup platform builder settings
  • From: Dean Ramsier
• Deploy from VS2005 to Windows CE 5
  • From: Stefano
• Re: Changing a BSP dependency
  • From: Mike Engel
• Re: How to backup platform builder settings
  • From: Bruce Eitman \(eMVP\)
• How to backup platform builder settings
  • From: wrx03ppp
• Changing a BSP dependency
  • From: Shutruk Nahunte
• Issues with Blutooth-netwok Component
  • From: Darshan_om
• problem in downlading HLBASE image to ARMINTEGRATOR board
  • From: Darshan_om
• Re: touch screen Calibration problem?help please!
  • From: Mike Engel
• touch screen Calibration problem?help please!
  • From: airen
• Re: How to move application project from PB4.2 to PB5.0?
  • From: yuchang
• Wince protect resources
  • From: Mike Engel
• Re: How to move application project from PB4.2 to PB5.0?
  • From: Mike Engel
• Re: PXA255 USB device controller GetStatus
  • From: Martin Meuli
• Re: Stream driver Power management
  • From: Marc
• Re: Issue when changing IP address from Static to DHCP
  • From: Michael--J
• How to add a virtual WAV driver ?
  • From: Lefthand
• Info needed about CSP
  • From: Johns
• Missing tools to install SDK (PB5.0)
  • From: Shutruk Nahunte
• Re: Issue when changing IP address from Static to DHCP
  • From: Michael--J
• Re: Issue when changing IP address from Static to DHCP
  • From: Michael--J
• Re:How to include CSP
  • From: Johns
• Re: stupid arm asm question
  • From: Shutruk Nahunte
• Re: stupid arm asm question
  • From: mobilevil
• Re: BSP problem
  • From: <ctacke/>
• Re: In my Build All process, It can not generate .dio file! why?
  • From: Steve Maillet \(eMVP\)
• BSP problem
  • From: ukas
• Re: PC/PDA USB transmission question ?
  • From: 阿隆西
• Re: In my Build All process, It can not generate .dio file! why?
  • From: magneto2005
• Re: PC/PDA USB transmission question ?
  • From: David Liao \(MS\)
• Re: PXA255 USB device controller GetStatus
  • From: David Liao \(MS\)
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Voidcoder
• Re: Cannot license run-time image
  • From: Paul G. Tobey [eMVP]
• ietheme.dll
  • From: Chris Dixon
• Cannot license run-time image
  • From: chuckl
• Re: What consume memory on startup?
  • From: Zhongwei Wang
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Voidcoder
• Re: What consume memory on startup?
  • From: Steve Maillet \(eMVP\)
• What consume memory on startup?
  • From: JF Morin
• Re: NOR flash
  • From: Mo
• Re: NOR flash
  • From: Steve Maillet \(eMVP\)
• Re: stupid arm asm question
  • From: Voidcoder
• NOR flash
  • From: Mo
• Re: Hive based Registry System bootup hangs
  • From: Dave Findlay
• Re: No RTTI in SDK?
  • From: Dave Findlay
• Re: Manual startup sever with TCP/IP
  • From: Paul G. Tobey [eMVP]
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Voidcoder
• Re: Manual startup sever with TCP/IP
  • From: ms
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Dean Ramsier
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Voidcoder
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Steve Maillet \(eMVP\)
• Re: Howto connect WinCE5 to a WinXP lan
  • From: Paul G. Tobey [eMVP]
• Re: PC connection without file converters?
  • From: Paul G. Tobey [eMVP]
• Re: stupid arm asm question
  • From: Steve Maillet \(eMVP\)
• Re: Stream driver Power management
  • From: Steve Maillet \(eMVP\)
• Re: Howto implement catalog feature dependency?
  • From: Steve Maillet \(eMVP\)
• Re: registry
  • From: Steve Maillet \(eMVP\)
• Re: registry
  • From: samlee
• Re: stupid arm asm question
  • From: Steve Maillet \(eMVP\)
• Re: Xscale...Ping Problem
  • From: Tweeeek
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Steve Maillet \(eMVP\)
• Re: How to include a CSP
  • From: Steve Maillet \(eMVP\)
• Xscale...Ping Problem
  • From: Tweeeek
• Re: How to include a CSP
  • From: Martin Meuli
• PXA255 USB device controller GetStatus
  • From: Martin Meuli
• How to include a CSP
  • From: Johns
• Re: Partitioning a Storage Volume isn't working
  • From: Ten
• registry
  • From: yamanalp
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Ajaya Babu
• Re: Stream driver Power management
  • From: Marc
• Re: Howto implement catalog feature dependency?
  • From: Olivier Bloch
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Ajaya Babu
• Re: stupid arm asm question
  • From: mobilevil
• Re: stupid arm asm question
  • From: mobilevil
• Re: stupid arm asm question
  • From: Shutruk Nahunte
• Re: stupid arm asm question
  • From: mobilevil
• Re: stupid arm asm question
  • From: Shutruk Nahunte
• stupid arm asm question
  • From: mobilevil
• Re: Question on CEC File ( Need defconfig equalent )??
  • From: Ajaya Babu
• CE 5.0 Make New Connection problem in release, workaround
  • From: gn
• Howto connect WinCE5 to a WinXP lan
  • From: Shutruk Nahunte
• Re: Slow Explorer in Windows CE 5.0
  • From: Peter K.
• Re: In my Build All process, It can not generate .dio file! why?
  • From: Bruce Eitman \(eMVP\)
• Question on CEC File ( Need defconfig equalent )??
  • From: Ajaya Babu
• Re: M-Systems ATAPI Device
  • From: Jone
• In my Build All process, It can not generate .dio file! why?
  • From: Jone
• problem with my packet IME
  • From: Microsoft.public.windowsce.embedded.vc
• Re: How to move application project from PB4.2 to PB5.0?
  • From: yuchang
• Re: partial debug and retail image build
  • From: Steve Maillet \(eMVP\)
• Re: partial debug and retail image build
  • From: <ctacke/>
• Re: Manual startup sever with TCP/IP
  • From: remco
• Re: Manual startup sever with TCP/IP
  • From: Steve Maillet \(eMVP\)
• partial debug and retail image build
  • From: writetothiru
• Re: Manual startup sever with TCP/IP
  • From: ms
• Re: WinCE & Acer travelMate c100
  • From: omer
• Re: Manual startup sever with TCP/IP
  • From: remco
• Manual startup sever with TCP/IP
  • From: ms
• Re: How to download Windows CE in PXA255
  • From: kavin
• PC/PDA USB transmission question ?
  • From: 阿隆西
• Re: WinCE & Acer travelMate c100
  • From: Steve Maillet \(eMVP\)
• Re: Howto implement catalog feature dependency?
  • From: Steve Maillet \(eMVP\)
• Re: No RTTI in SDK?
  • From: Michael J. Salamone
• PC connection without file converters?
  • From: Pavel A.
• Re: No RTTI in SDK?
  • From: Voidcoder
• Re: USBFN storage device
  • From: Voidcoder
• Re: No RTTI in SDK?
  • From: Dave Findlay
• Re: assembly in Platform Builder
  • From: angryswede
• Re: assembly in Platform Builder
  • From: Dean Ramsier
• Re: force SNMP restart
  • From: Paul G. Tobey [eMVP]
• Re: Enabling/disabling ethernet on the fly
  • From: Paul G. Tobey [eMVP]
• Re: Partitioning a Storage Volume isn't working
  • From: Jimbo
• Re: Problem about debug eboot on Smdk2410
  • From: Voidcoder
• force SNMP restart
  • From: Morix
• Re: assembly in Platform Builder
  • From: angryswede
• Re: Create bootable CF with application
  • From: Ten
• Re: No RTTI in SDK?
  • From: Michael J. Salamone
• Re: PCL Printing in WinCE5
  • From: Olivier Bloch
• PCL Printing in WinCE5
  • From: JoeB
• Re: Howto implement catalog feature dependency?
  • From: Olivier Bloch
• No RTTI in SDK?
  • From: Dave Findlay
• Re: assembly in Platform Builder
  • From: Dean Ramsier
• Re: Enabling/disabling ethernet on the fly
  • From: Bill T
• Re: which bib files to configure
  • From: Dean Ramsier
• Re: USBFN storage device
  • From: Dean Ramsier
• Re: USBFN storage device
  • From: Mike Engel
• Repllog without dialog
  • From: Javky
• Re: USB Function Mass Storage Client Driver
  • From: Mike Engel
• Re: How to move application project from PB4.2 to PB5.0?
  • From: Mike Engel
• USBFN storage device
  • From: Mike Engel
• Re: PB 4.2 image + optical mouse : hangs after screensaver ends. PM ?
  • From: rusakov2
• Re: which bib files to configure
  • From: prasi
• Can I write data into specific block of SD card on Wince500 platform?
  • From: xuhaoz
• Problem about debug eboot on Smdk2410
  • From: etitan
• Re: Repollog.exe Parameters ?
  • From: 阿隆西
• Re: Display BMP on .NET form for WinCE 5.0
  • From: Voidcoder
• Re: OS image will not load driver.
  • From: Steve Maillet \(eMVP\)
• Re: SDRAM on CE 5.0
  • From: Voidcoder
• Re: BUG? do SCAN and DEFRAG corrupt a TFAT partition with Hive-based registry
  • From: Steve Maillet \(eMVP\)
• Re: Why is CreatePartition() using bytes based on value of snNumSectors?
  • From: Jimbo
• Re: Why is CreatePartition() using bytes based on value of snNumSectors?
  • From: Andrew Rogers [MSFT]
• Re: SDRAM on CE 5.0
  • From: Steve Maillet \(eMVP\)
• Re: Why does CreatePartition() fail when szPartitionName is ""?
  • From: Andrew Rogers [MSFT]
• Re: CEPC 4.1 Persist Default Network Username and Password
  • From: Steve Maillet \(eMVP\)
• Re: SDRAM on CE 5.0
  • From: Mark
• Re: assembly in Platform Builder
  • From: angryswede
• Re: PB 4.2 image + optical mouse : hangs after screensaver ends. PM ?
  • From: samlee
• Re: Howto implement catalog feature dependency?
  • From: Voidcoder
• Re: SDRAM on CE 5.0
  • From: Bruce Eitman \(eMVP\)
• Re: Repollog.exe Parameters ?
  • From: Bruce Eitman \(eMVP\)
• Re: Howto implement catalog feature dependency?
  • From: Voidcoder
• Re: SDRAM on CE 5.0
  • From: Mark
• re: ADOCE
  • From: Sue Loh [MS]
• Re: assembly in Platform Builder
  • From: Dean Ramsier
• Re: SDRAM on CE 5.0
  • From: Dean Ramsier
• Re: Repollog.exe Parameters ?
  • From: Paul G. Tobey [eMVP]
• Re: Issue when changing IP address from Static to DHCP
  • From: Paul G. Tobey [eMVP]
• Re: Howto implement catalog feature dependency?
  • From: Voidcoder
• Re: ADOCE
  • From: Chris Tacke, eMVP
• Re: Device Driver programming
  • From: Chris Tacke, eMVP
• Re: Create bootable CF with application
  • From: Jimbo
• Re: Device Driver programming
  • From: Bruce Eitman \(eMVP\)
• Re: Bug in ControlPanel\Backlight tab
  • From: Bruce Eitman \(eMVP\)
• Re: Newbie embedded Visual C++ question
  • From: Bruce Eitman \(eMVP\)
• Re: Howto implement catalog feature dependency?
  • From: Voidcoder
• Re: Display BMP on .NET form for WinCE 5.0
  • From: BEP
• Re: assembly in Platform Builder
  • From: angryswede
• issue is coming when migrate the OS design from WinCE 4.2 to WinCE
  • From: Bobie
• mui_sz loading performance
  • From: anonymous
• Display BMP on .NET form for WinCE 5.0
  • From: BEP
• Newbie embedded Visual C++ question
  • From: Emmanuel Viollet
• Re: SDRAM on CE 5.0
  • From: Mark
• Re: SDRAM on CE 5.0
  • From: Dean Ramsier
• Re: CEPC 4.1 Persist Default Network Username and Password
  • From: Howard Swope
• Device Driver programming
  • From: Veerasivakumar
• Re: Direct Sound on CE 5.0
  • From: Enrico Richter
• Re: CreateFile() Smartphone 2002 and 2003
  • From: Thomas Carton
• Re: Howto implement catalog feature dependency?
  • From: Olivier Bloch
• CreateFile() Smartphone 2002 and 2003
  • From: Thomas Carton
• ADOCE
  • From: jerry
• ADOCE
  • From: jerry
• Re: CE5.0 USB driver, the relationship of PDD and MDD
  • From: Michael AMSELLEM
• Re: Howto implement catalog feature dependency?
  • From: Olivier Bloch
• Re: assembly in Platform Builder
  • From: K. S. Huang
• Re: How to download image via command line tool?
  • From: K. S. Huang
• Re: Flash filesystem
  • From: mobilevil
• Re: how to show cursor when using touch screen
  • From: Maverick
• CE5.0 USB driver, the relationship of PDD and MDD
  • From: 阿隆西
• Re: Howto implement catalog feature dependency?
  • From: sajid
• Re: which bib files to configure
  • From: Steve Maillet \(eMVP\)
• Issue when changing IP address from Static to DHCP
  • From: Michael--J
• Re: CEPC 4.1 Persist Default Network Username and Password
  • From: Steve Maillet \(eMVP\)
• Re: Create bootable CF with application
  • From: Steve Maillet \(eMVP\)
• Re: Direct Sound on CE 5.0
  • From: Steve Maillet \(eMVP\)
• Re: PreXxxx.bat, PostXxxx.bat and CE.BIB
  • From: Steve Maillet \(eMVP\)
• Re: Using Boost in Windows CE 5 (PlatformBuilder) ?
  • From: Steve Maillet \(eMVP\)
• Re: SDRAM on CE 5.0
  • From: K. S. Huang
• Re: Repollog.exe Parameters ?
  • From: 阿隆西
• ActivateDevice error in USB driver
  • From: Clyde
• Re: assembly in Platform Builder
  • From: bsqr_TSAT
• Re: Multiple catalog features, one binary
  • From: Voidcoder
• Howto implement catalog feature dependency?
  • From: Voidcoder
• Re: assembly in Platform Builder
  • From: angryswede
• Re: Bug in ControlPanel\Backlight tab
  • From: Voidcoder
• Re: assembly in Platform Builder
  • From: Chris Tacke, eMVP
• Re: Bug in ControlPanel\Backlight tab
  • From: Keaven Pineau
• Re: assembly in Platform Builder
  • From: Jimbo
• Re: Create bootable CF with application
  • From: Jimbo
• assembly in Platform Builder
  • From: angryswede
• Re: Bug in ControlPanel\Backlight tab
  • From: Keaven Pineau
• Re: How does power management discover battery state changes?
  • From: Zhongwei Wang
• Multiple catalog features, one binary
  • From: Voidcoder
• Re: PB5.0 SDK export problem
  • From: gozer61
• How does power management discover battery state changes?
  • From: buckyllama
• CEPC 4.1 Persist Default Network Username and Password
  • From: Howard Swope
• Re: Driver development without Platform Builder
  • From: Voidcoder
• Re: PreXxxx.bat, PostXxxx.bat and CE.BIB
  • From: Chris Tacke, eMVP
• Re: second bank of flash
  • From: Voidcoder
• Re: Partitioning a Storage Volume isn't working
  • From: Ten
• Re: Direct Sound on CE 5.0
  • From: Enrico Richter
• Re: want to develop my WinCE OS
  • From: Voidcoder
• Re: Question about FileSystem
  • From: Ten
• Re: Driver development without Platform Builder
  • From: Stanley He
• which bib files to configure
  • From: prasi
• Re: Flat Panel Resolution
  • From: Jimbo
• Re: Repollog.exe Parameters ?
  • From: Paul G. Tobey [eMVP]
• Re: want to develop my WinCE OS
  • From: Paul G. Tobey [eMVP]
• Re: Direct Sound on CE 5.0
  • From: Jimbo
• Partitioning a Storage Volume isn't working
  • From: Jimbo
• Re: Power Manager do not call my driver
  • From: Anthony Pellerin
• Re: Howto implement catalog feature dependency?
  • From: andreolkovisky
• AC97 Multiple Codecs
  • From: jrwince
• Re: Why is GetStoreInfo() returning nonsensical values?
  • From: Jimbo
• Re: Platform builder on XP pro x64
  • From: Stanley He
• Re: Bug in ControlPanel\Backlight tab
  • From: Keaven Pineau
• Re: Power Manager do not call my driver
  • From: Keaven Pineau
• Re: How can I use share interrupt?
  • From: jerry
• Re: Why does CreatePartition() fail when szPartitionName is ""?
  • From: Jimbo
• Re: diskonchip at wince5.0
  • From: jerry
• Re: Create bootable CF with application
  • From: Jimbo
• Re: second bank of flash
  • From: Mo
• Re: Using Boost in Windows CE 5 (PlatformBuilder) ?
  • From: Stanley He
• How to download image via command line tool?
  • From: Ole Will
• Flat Panel Resolution
  • From: Steve
• Direct Sound on CE 5.0
  • From: Enrico Richter
• Re: SDRAM on CE 5.0
  • From: Mark
• USB Power ON/OFF Issue !
  • From: Yu
• SDK install problem
  • From: ms
• Re: QFE installation error
  • From: Magnux
• Re: Multiple catalog features, one binary
  • From: Olivier Bloch
• CE500 Mainstone II BSP - EBOOT/FlashErase bug
  • From: Magnux
• Re: Flash filesystem
  • From: turnsek
• Repollog.exe Parameters ?
  • From: 阿隆西
• Re: Multiple catalog features, one binary
  • From: Olivier Bloch
• How to move application project from PB4.2 to PB5.0?
  • From: yuchang
• Re: Why is GetStoreInfo() returning nonsensical values?
  • From: rusakov2
• RE: how to show cursor when using touch screen
  • From: sabya
• IDE Driver problem
  • From: sabya
• How to configure STUART for Serial Communication
  • From: Peter
• Re: Flash filesystem
  • From: mobilevil
• PB 4.2 image + optical mouse : hangs after screensaver ends. PM ?
  • From: rusakov2
• Re: How can I use share interrupt?
  • From: Valter Minute
• Driver development without Platform Builder
  • From: magjoe
• How to capture the audio from an incoming call in VOIP Phone
  • From: winfresh
• Re: Power Manager do not call my driver
  • From: Anthony Pellerin
• Re: want to develop my WinCE OS
  • From: Steve Maillet \(eMVP\)
• want to develop my WinCE OS
  • From: abc
• Re: Using Boost in Windows CE 5 (PlatformBuilder) ?
  • From: Steve Maillet \(eMVP\)
• Re: Platform builder on XP pro x64
  • From: Steve Maillet \(eMVP\)
• Re: Create bootable CF with application
  • From: Steve Maillet \(eMVP\)
• Re: SDRAM on CE 5.0
  • From: K. S. Huang
• Re: Why does CreatePartition() fail when szPartitionName is ""?
  • From: K. S. Huang
• Re: How can I use share interrupt?
  • From: jerry
• Re: Slow Explorer in Windows CE 5.0
  • From: Gowhawk
• Re: Hive-based Registry and PM(Power Manage module)
  • From: Gowhawk
• Re: How to send a SD command to a SD interface in the Wince420 platform
  • From: xuhaoz
• Re: Why is GetStoreInfo() returning nonsensical values?
  • From: Paul G. Tobey [eMVP]
• Re: Create bootable CF with application
  • From: Jimbo
• Re: download os to device without PB
  • From: arssa2020
• Re: Storage Memory dilemma
  • From: Michael--J
• Re: modify bin
  • From: mamaich
• Re: PreXxxx.bat, PostXxxx.bat and CE.BIB
  • From: Steve Maillet \(eMVP\)
• Re: Is it possible to invert left-right sense of mouse in CE.Net?
  • From: Steve Maillet \(eMVP\)
• Re: Create bootable CF with application
  • From: Steve Maillet \(eMVP\)
• second bank of flash
  • From: Mo
• Re: CESYS and Int 13H
  • From: Steve Maillet \(eMVP\)
• Re: CE License Key Uitlity
  • From: Steve Maillet \(eMVP\)
• Why is CreatePartition() using bytes based on value of snNumSectors?
  • From: Jimbo
• Re: Why is GetStoreInfo() returning nonsensical values?
  • From: Jimbo
• Why does CreatePartition() fail when szPartitionName is ""?
  • From: Jimbo
• Bug in ControlPanel\Backlight tab
  • From: Keaven Pineau
• SDRAM on CE 5.0
  • From: Mark
• Power Manager do not call my driver
  • From: Keaven Pineau
• Re: The backlight cpl applet
  • From: Keaven Pineau
• Re: Loading serial driver for STUART
  • From: Voidcoder
• CE License Key Uitlity
  • From: Bill T
• Re: Enabling/disabling ethernet on the fly
  • From: Bill T
• Re: Platform builder on XP pro x64
  • From: Jason Spence
• Why is GetStoreInfo() returning nonsensical values?
  • From: Jimbo
• Re: Enabling/disabling ethernet on the fly
  • From: Paul G. Tobey
• Re: Platform builder on XP pro x64
  • From: Stanley He
• Any chance for 64 bit file IO on wince 5.0?
  • From: Voidcoder
• Using Boost in Windows CE 5 (PlatformBuilder) ?
  • From: Stanley He
• PreXxxx.bat, PostXxxx.bat and CE.BIB
  • From: Chris Tacke, eMVP
• Re: IPSM Corruption
  • From: sean
• Re: Why does OpenStore(TEXT("\\Hard Disk")) fail?
  • From: Jimbo
• Re: Hive-based Registry and PM(Power Manage module)
  • From: Sue Loh [MS]
• Enabling/disabling ethernet on the fly
  • From: Bill T
• RE: bluetooth stack up in CE 4.1
  • From: anonymous
• Re: Hive-based Registry and PM(Power Manage module)
  • From: Danny
• Re: How to send a SD command to a SD interface in the Wince420 platform
  • From: Dean Ramsier
• Re: Loading serial driver for STUART
  • From: Peter
• Re: Storage Memory dilemma
  • From: Dean Ramsier
• Re: Why does OpenStore(TEXT("\\Hard Disk")) fail?
  • From: Bruce Eitman \(eMVP\)
• Re: Any chance for 64 bit file IO on wince 5.0?
  • From: Michael J. Salamone
• RE: Loading serial driver for STUART
  • From: turnsek
• RE: Loading serial driver for STUART
  • From: turnsek
• RE: Loading serial driver for STUART
  • From: Peter
• Re: PB 5.0 vs. EVC++ 4.0 re: Storage Manager
  • From: Anthony Pellerin
• [Q]: Emulator with hive
  • From: sajid
• RE: Loading serial driver for STUART
  • From: turnsek
• Re: How does NDIS IST and ISR work ?
  • From: "Soemin Tjong [MSFT]"
• Loading serial driver for STUART
  • From: Peter
• Re: how to show cursor when using touch screen
  • From: reinsch
• Re: WinCEPB42-041231-Product-Update-Rollup-ARMV4.msi Installing Problems
  • From: fmartuzzi
• Re: rdmsr outside the kernel
  • From: reinsch
• Re: How can I use share interrupt?
  • From: Valter Minute
• Internal message buffer overflow!!!
  • From: yuchang
• Re: WinCEPB42-041231-Product-Update-Rollup-ARMV4.msi Installing Problems
  • From: Valter Minute
• Re: PXA 270 Display Drivers!
  • From: Valter Minute
• WinCEPB42-041231-Product-Update-Rollup-ARMV4.msi Installing Problems
  • From: fmartuzzi
• how to show cursor when using touch screen
  • From: Maverick
• How can I use share interrupt?
  • From: jerry
• Re: Flash filesystem
  • From: turnsek
• Re: TFAT stability
  • From: turnsek
• Re: TFAT stability
  • From: Mark Moeller
• M-Systems ATAPI Device
  • From: Sushma
• CESYS and Int 13H
  • From: Jimbo
• PXA 270 Display Drivers!
  • From: Jesse Xiao
• Re: cannot use TRY and Catch
  • From: Maverick
• Platform builder on XP pro x64
  • From: Jason Spence
• Storage Memory dilemma
  • From: Michael--J
• Re: Flash filesystem
  • From: mobilevil
• Re: download os to device without PB
  • From: mobilevil
• Re: How to send a SD command to a SD interface in the Wince420 platform
  • From: xuhaoz
• Re: Why does OpenStore(TEXT("\\Hard Disk")) fail?
  • From: Jimbo
• Re: Why does OpenStore(TEXT("\\Hard Disk")) fail?
  • From: Ariane Billings
• Re: Why does OpenStore(TEXT("\\Hard Disk")) fail?
  • From: Jimbo
• RE: Why does OpenStore(TEXT("\\Hard Disk")) fail?
  • From: Ariane Billings
• Re: Create bootable CF with application
  • From: Jimbo
• Why does OpenStore(TEXT("\\Hard Disk")) fail?
  • From: Jimbo
• Re: Is it possible to invert left-right sense of mouse in CE.Net?
  • From: Paul G. Tobey [eMVP]
• Re: How to send a SD command to a SD interface in the Wince420 platform
  • From: Dean Ramsier
• Re: How to acquire the driver information from wince420 ?
  • From: Dean Ramsier
• re: Slow Explorer in Windows CE 5.0
  • From: Sue Loh [MS]
• Re: PB 5.0 vs. EVC++ 4.0 re: Storage Manager
  • From: Jimbo
• Re: Windows CE Virtual memory
  • From: Sue Loh [MS]
• PB 5.0 vs. EVC++ 4.0 re: Storage Manager
  • From: Jimbo
• Re: download os to device without PB
  • From: Dave Heil \(exMVP\)
• Re: How to download Windows CE in PXA255
  • From: Voidcoder
• Re: error present in sysgen process(blddmeo clean -q for magnito)
  • From: Bruce Eitman \(eMVP\)
• Re: diskonchip at wince5.0
  • From: Bruce Eitman \(eMVP\)
• Re: download os to device without PB
  • From: arssa2020
• Re: capture all mouse events
  • From: Voidcoder
• Re: download os to device without PB
  • From: Voidcoder
• Re: SNMP Extension Agent - Set request problem
  • From: Morix
• Slow Explorer in Windows CE 5.0
  • From: Peter K.
• SNMP Extension Agent - Set request problem
  • From: Morix
• USB-ethernet adapter for CE.Net?
  • From: 5thWheel
• Re: Is it possible to invert left-right sense of mouse in CE.Net?
  • From: 5thWheel
• Re: Windows CE Virtual memory
  • From: Michael J. Salamone
• Re: FTP listing unreadable ?
  • From: Emmanuel Viollet
• Windows CE Virtual memory
  • From: Mohin
• capture all mouse events
  • From: jerry
• How to download Windows CE in PXA255
  • From: dev
• Re: Flash filesystem
  • From: turnsek
• How to send a SD command to a SD interface in the Wince420 platform
  • From: xuhaoz
• I want to add "cpl Application" to Control Panel In Thin Client.
  • From: junho.yoon
• Re: Hive-based Registry and PM(Power Manage module)
  • From: Gowhawk
• diskonchip at wince5.0
  • From: jerry
• Re: virtual UART driver
  • From: Steve Maillet \(eMVP\)
• WSPStringToAddress problem in LSP
  • From: ganesan
• Re: How to acquire the driver information from wince420 ?
  • From: xuhaoz
• Re: How to acquire the driver information from wince420 ?
  • From: xuhaoz
• virtual UART driver
  • From: visi
• re: Question about FileSystem
  • From: Susan Loh [MS]
• Re: Hive-based Registry and PM(Power Manage module)
  • From: Sue Loh [MS]
• Re: rdmsr outside the kernel
  • From: Sue Loh [MS]
• Re: cannot use TRY and Catch
  • From: Sue Loh [MS]
• Re: download os to device without PB
  • From: mobilevil
• error present in sysgen process(blddmeo clean -q for magnito)
  • From: Jun Meng
• Re: Off-topic: using WinXP to prep CF for WinCE
  • From: Steve Maillet \(eMVP\)
• Re: Off-topic: using WinXP to prep CF for WinCE
  • From: Jimbo
• bluetooth stack up in CE 4.1
  • From: anonymous
• Re: How to acquire the driver information from wince420 ?
  • From: Dean Ramsier
• Re: CE boot from Compact Flash: FAT16 vs. FAT32
  • From: Steve Maillet \(eMVP\)
• Re: How to acquire the driver information from wince420 ?
  • From: Steve Maillet \(eMVP\)
• CE boot from Compact Flash: FAT16 vs. FAT32
  • From: Jimbo
• Re: Off-topic: using WinXP to prep CF for WinCE
  • From: Steve Maillet \(eMVP\)
• download os to device without PB
  • From: arssa2020
• Off-topic: using WinXP to prep CF for WinCE
  • From: Jimbo
• Re: IssueBulkTransfer problem
  • From: Kory Herzinger
• Re: Flash filesystem
  • From: Bruce Eitman \(eMVP\)
• Re: install / add RAS server
  • From: Paul G. Tobey [eMVP]
• Re: install / add RAS server
  • From: Marc
• Re: install / add RAS server
  • From: Paul G. Tobey [eMVP]
• Re: Is it possible to invert left-right sense of mouse in CE.Net?
  • From: Paul G. Tobey [eMVP]
• Re: USB Function Mass Storage Client Driver
  • From: Germano Kern
• Is it possible to invert left-right sense of mouse in CE.Net?
  • From: 5thWheel
• Re: Flash filesystem
  • From: Bruce Eitman \(eMVP\)
• Re: Can I use the same window to be both a desktop and a taskbar ?
  • From: Charles Peterson
• Re: Flash filesystem
  • From: turnsek
• Re: How to acquire the driver information from wince420 ?
  • From: xuhaoz
• Re: Flash filesystem
  • From: Bruce Eitman \(eMVP\)
• Re: How to acquire the driver information from wince420 ?
  • From: Dean Ramsier
• Re: Flash filesystem
  • From: Bruce Eitman \(eMVP\)
• Re: Flash filesystem
  • From: Bruce Eitman \(eMVP\)
• USB Webcam driver in Windows Embedded Challange
  • From: Adrian
• Re: install / add RAS server
  • From: Marc
• Re: Control Panel Exception in WinCE 5.0
  • From: Hans
• Re: DHCP, DNS and IPCONFIG on CE 5.0 - Solution
  • From: mfr
• Re: install / add RAS server
  • From: Marc
• Re: Flash filesystem
  • From: turnsek
• How to acquire the driver information from wince420 ?
  • From: xuhaoz
• Re: what does this mean?
  • From: Steve Maillet \(eMVP\)
• Re: rdmsr outside the kernel
  • From: reinsch
• Re: rdmsr outside the kernel
  • From: Isaac Chen
• RE: Stream driver Power management
  • From: Patryk Kaminski [MSFT]
• Re: Flash filesystem
  • From: mobilevil
• Re: PXA270 Power I2C access on CE5.0 hangs system
  • From: mobilevil
• Re: QFE installation error
  • From: hehe
• Re: rdmsr outside the kernel
  • From: K. S. Huang
• WebView on 4.2
  • From: Paul G. Tobey [eMVP]
• IssueBulkTransfer problem
  • From: Kory Herzinger
• Re: Flash filesystem
  • From: Zhongwei Wang
• Re: install / add RAS server
  • From: Mike Slot
• Re: interrupt relocation
  • From: Dean Ramsier
• PXA270 Power I2C access on CE5.0 hangs system
  • From: Mark
• RE: How to generate browse information in PB5.0?
  • From: adam karbasi
• RE: Can I use the same window to be both a desktop and a taskbar ?
  • From: adam karbasi
• Re: where can i find free third-party drivers for wince net?
  • From: adam karbasi
• RE: wince v5, PC104 SBC boot connection mgr to target via serial
  • From: rschultz2112
• Re: where can i find free third-party drivers for wince net?
  • From: Bruce Eitman \(eMVP\)
• RE: wince v5, PC104 SBC boot connection mgr to target via serial
  • From: rschultz2112
• Re: what does this mean?
  • From: Voidcoder
• Re: PB5.0 SDK export problem
  • From: Christopher Le [MS]
• Re: Flash filesystem
  • From: Bruce Eitman \(eMVP\)
• Re: Want to know how-to work with Remote Tools in PB
  • From: Clyde
• Re: Displaying Asian fonts
  • From: Gary Daniels [MS]
• Re: cannot use TRY and Catch
  • From: Voidcoder
• Re: interrupt relocation
  • From: Voidcoder
• Re: Flash filesystem
  • From: Zhongwei Wang
• Re: what does this mean?
  • From: Voidcoder
• Re: modify bin
  • From: Marc
• wince v5, PC104 SBC boot connection mgr to target via serial
  • From: rschultz2112
• Re: modify bin
  • From: Paul G. Tobey [eMVP]
• Re: Hive registry flushes automatically
  • From: hansr
• Can I use the same window to be both a desktop and a taskbar ?
  • From: Dariusz Czarnecki
• RE: Flash filesystem
  • From: turnsek
• Re: Hive-based Registry and PM(Power Manage module)
  • From: gowhawk@xxxxxxxxx
• Re: modify bin
  • From: Marc
• Re: Flash filesystem
  • From: Bruce Eitman \(eMVP\)
• Re: modify bin
  • From: remco
• rdmsr outside the kernel
  • From: reinsch
• Re: Displaying Asian fonts
  • From: reinsch
• RE: Flash filesystem
  • From: Ken Christensen
• Re: Hive-based Registry and PM(Power Manage module)
  • From: Bruce Eitman \(eMVP\)
• Re: modify bin
  • From: Bruce Eitman \(eMVP\)
• Re: install / add RAS server
  • From: Marc
• IE sample exception in WinCE 5.0
  • From: Hans
• Control Panel Exception in WinCE 5.0
  • From: Hans
• Re: CE 4.2 Bluetooth configuration
  • From: Bernd
• USB Function Mass Storage Client Driver
  • From: Stin
• modify bin
  • From: Marc
• Re: install / add RAS server
  • From: Marc
• Is there any sample or resource for MAMM?
  • From: rollingstone
• Hive-based Registry and PM(Power Manage module)
  • From: Gowhawk
• Re: what does this mean?
  • From: xuhaoz
• Re: How does NDIS IST and ISR work ?
  • From: darshan . tapdia
• interrupt relocation
  • From: keshav
• interrupt relocation
  • From: keshav
• Question about FileSystem
  • From: xuhaoz
• Re: ActiveSync vs Remote tools
  • From: John
• cannot use TRY and Catch
  • From: Maverick
• Re: what does this mean?
  • From: xuhaoz
• Re: ActiveSync vs Remote tools
  • From: John
• Re: Want to know how-to work with Remote Tools in PB
  • From: Clyde
• Re: Platform builder, sysgen, and lockups...
  • From: Voidcoder
• Kernel Debuger problem, Please Help
  • From: Charles Wang
• Re: FTP listing unreadable ?
  • From: Steve Maillet \(eMVP\)
• Re: How does NDIS IST and ISR work ?
  • From: Steve Maillet \(eMVP\)
• Re: Displaying Asian fonts
  • From: Paul G. Tobey [eMVP]
• Re: Stream driver Power management
  • From: Voidcoder
• Re: Reading difference with reading from HDD and Main Memory ?? for DRM
  • From: Voidcoder
• Re: what does this mean?
  • From: Voidcoder
• Passing authentication info to EAP-PEAP via RasEapGetIdentity
  • From: Michael
• Re: PB5.0 SDK export problem
  • From: Derek Gallaher
• Re: OS image will not load driver.
  • From: jvasquez
• Re: Trying to SYSGEN with Windows CE 5.0's Platform Builder
  • From: Phil Brimblecombe
• Re: IPSM Corruption
  • From: turnsek
• Flash filesystem
  • From: turnsek
• Re: Platform builder, sysgen, and lockups...
  • From: Emmanuel Viollet
• USB Host Controller Driver Test CETK issues
  • From: Bubba
• Re: Displaying Asian fonts
  • From: Zhongwei Wang
• Re: Trying to SYSGEN with Windows CE 5.0's Platform Builder
  • From: Reggie Counts
• Re: Modify cesysgen.bat behaviour in CE5.0
  • From: Leif O
• Re: Stream driver Power management
  • From: Marc
• Re: Stream driver Power management
  • From: Marc
• Re: Stream driver Power management
  • From: Marc
• Re: IPSM Corruption
  • From: Germano Kern
• Re: Stream driver Power management
  • From: Marc
• Re: How does NDIS IST and ISR work ?
  • From: darshan . tapdia
• Re: Can't create a File in xxx_Init, why?
  • From: xuhaoz
• Re: Why is the startup time of windows ce 5.0 so long?
  • From: Olivier BLOCH
• Re: Can't create a File in xxx_Init, why?
  • From: Olivier BLOCH
• Re: OS image will not load driver.
  • From: Olivier BLOCH
• Reading difference with reading from HDD and Main Memory ?? for DRM
  • From: Bluehare
• FTP listing unreadable ?
  • From: Emmanuel Viollet
• How to refresh the data on USB hard disk?
  • From: Jack
• Re: pxa270 resume from sleep (mainstone II)
  • From: fmelandri
• Sometimes ActiveSync is failed by USB !!
  • From: Yu
• Why we require Two ISRs(GIISR & Miniport ISR) in NDIS?
  • From: darshan . tapdia
• Displaying Asian fonts
  • From: reinsch
• Re: wince.bat and boot loader docs
  • From: Bruce Eitman \(eMVP\)
• Re: What's the difference between TARGETLIBS and SOURCELIBS in sources file?
  • From: Bruce Eitman \(eMVP\)
• What's the difference between TARGETLIBS and SOURCELIBS in sources file?
  • From: Wang Yeqing
• Re: Can't create a File in xxx_Init, why?
  • From: xuhaoz
• Re: what does this mean?
  • From: xuhaoz
• Re: Modify cesysgen.bat behaviour in CE5.0
  • From: Steve Maillet \(eMVP\)
• Re: Trying to SYSGEN with Windows CE 5.0's Platform Builder
  • From: Steve Maillet \(eMVP\)
• Re: wince.bat and boot loader docs
  • From: Steve Maillet \(eMVP\)
• RE: CE 4.2 Bluetooth configuration
  • From: Greg Scott [MS]
• Re: doesn't boot after enable Kernel debugger
  • From: li
• Re: doesn't boot after enable Kernel debugger
  • From: li
• Re: wince.bat and boot loader docs
  • From: Jason Spence
• Re: doesn't boot after enable Kernel debugger
  • From: Paul G. Tobey [eMVP]
• Re: doesn't boot after enable Kernel debugger
  • From: li
• Re: doesn't boot after enable Kernel debugger
  • From: li
• Re: doesn't boot after enable Kernel debugger
  • From: Paul G. Tobey [eMVP]
• Re: CF Storage Card Question (4.2 .Net / Sandgate)
  • From: Dale Ziebarth
• Re: doesn't boot after enable Kernel debugger
  • From: li
• Re: bootloader
  • From: Reggie Counts
• Re: Trying to SYSGEN with Windows CE 5.0's Platform Builder
  • From: Reggie Counts
• Re: doesn't boot after enable Kernel debugger
  • From: li
• Re: wince.bat and boot loader docs
  • From: Dean Ramsier
• Re: doesn't boot after enable Kernel debugger
  • From: Paul G. Tobey [eMVP]
• Re: Stream driver Power management
  • From: Voidcoder
• Re: doesn't boot after enable Kernel debugger
  • From: li
• Re: Build Errors reported - yet none found!!
  • From: Voidcoder
• Re: doesn't boot after enable Kernel debugger
  • From: Paul G. Tobey [eMVP]
• doesn't boot after enable Kernel debugger
  • From: li
• Memory hungry HTML
  • From: Mike Slot
• Re: install / add RAS server
  • From: Mike Slot
• Re: OS image will not load driver.
  • From: jvasquez
• Re: how to get a full path
  • From: Ariane Billings
• Re: PB5.0 SDK export problem
  • From: Christopher Le [MS]
• Re: what does this mean?
  • From: Voidcoder
• Re: Adding new BSP for an existing workspace
  • From: Paul G. Tobey [eMVP]
• Platform builder, sysgen, and lockups...
  • From: Emmanuel Viollet
• Re: i82551er and KITL
  • From: Emmanuel Viollet
• Re: wince.bat and boot loader docs
  • From: Jason Spence
• Re: OS image will not load driver.
  • From: jvasquez
• Re: wince.bat and boot loader docs
  • From: Dean Ramsier
• Re: OS image will not load driver.
  • From: Olivier BLOCH
• Re: OS image will not load driver.
  • From: jvasquez
• Adding new BSP for an existing workspace
  • From: paulo . pinheiro
• install / add RAS server
  • From: Marc
• CE 4.2 Bluetooth configuration
  • From: BSO
• Re: Modify cesysgen.bat behaviour in CE5.0
  • From: Andrew Schweitzer
• Re: Build Errors reported - yet none found!!
  • From: Enrico Richter
• Re: Build Errors reported - yet none found!!
  • From: Stewart Clark
• Re: Can't create a File in xxx_Init, why?
  • From: Olivier BLOCH
• Re: OS image will not load driver.
  • From: Olivier BLOCH
• Re: wince.bat and boot loader docs
  • From: Jason Spence
• Re: QFE installation error
  • From: Magnux
• Re: How many API's
  • From: Tweeeek
• UHCI Host controller driver incompatibility with Visual Studio debugging?
  • From: Michael Lofgren
• USB Device Detected but load failed , Intel 915g CEPC WinCE 5.0
  • From: Manish Jaggi
• Stream driver Power management
  • From: Marc
• Modify cesysgen.bat behaviour in CE5.0
  • From: Leif O
• Re: USB to Serial device driver for CE.NET 4.2
  • From: Michael Lofgren
• Re: TFAT stability
  • From: turnsek
• Re: TFAT stability
  • From: turnsek
• Re: how to build the ship version.
  • From: Yannick Chamming's [eMVP]
• how to build the ship version.
  • From: airen
• Load distribution among NIC's( which driver model to follow)
  • From: sonu
• wince.bat and boot loader docs
  • From: Jason Spence
• Re: TFAT stability
  • From: MADSAM
• Re: what does this mean?
  • From: <ctacke/>
• Re: pxa270 resume from sleep (mainstone II)
  • From: Suzanne
• what does this mean?
  • From: xuhaoz
• Re: WinCE & Acer travelMate c100
  • From: Aaron Lawrence
• Re: How many API's
  • From: Aaron Lawrence
• Re: ActiveSync vs Remote tools
  • From: Aaron Lawrence
• Re: Can't create a File in xxx_Init, why?
  • From: xuhaoz
• Re: OS image will not load driver.
  • From: Steve Maillet \(eMVP\)
• Re: how to get a full path
  • From: Gary
• Re: OS image will not load driver.
  • From: jvasquez
• Re: OS image will not load driver.
  • From: Steve Maillet \(eMVP\)
• Re: How does NDIS IST and ISR work ?
  • From: Steve Maillet \(eMVP\)
• Re: Trying to SYSGEN with Windows CE 5.0's Platform Builder
  • From: Steve Maillet \(eMVP\)
• Re: TFAT stability
  • From: Steve Maillet \(eMVP\)
• Re: RTL8139 & SysIntr
  • From: Steve Maillet \(eMVP\)
• Re: pxa270 resume from sleep (mainstone II)
  • From: Steve Maillet \(eMVP\)
• Re: where is wininet.lib coming from?
  • From: Paul G. Tobey [eMVP]
• Re: OS image will not load driver.
  • From: jvasquez
• Re: where is wininet.lib coming from?
  • From: J Garcia
• Backlight Driver
  • From: Keaven Pineau
• Re: OS image will not load driver.
  • From: jvasquez
• Re: platfrm builder for windows mobile-5
  • From: Bruce Eitman \(eMVP\)
• Re: pxa270 resume from sleep (mainstone II)
  • From: Voidcoder
• Re: Trying to SYSGEN with Windows CE 5.0's Platform Builder
  • From: Reggie Counts
• Re: IPSM Corruption
  • From: sean
• Re: ActiveSync vs Remote tools
  • From: Paul G. Tobey [eMVP]
• Hub in CEPC
  • From: Lancey
• Re: QFE installation error
  • From: Magnux
• How to implement screen saver functionality - turn off LCD backlight after predefined user inactivity time
  • From: Dariusz Czarnecki
• CF Card "Socket" and windows ce.net 4.2
  • From: Luca
• Build Errors reported - yet none found!!
  • From: Stewart Clark
• RTL8139 & SysIntr
  • From: Zhastaph
• Re: PB5.0 SDK export problem
  • From: Derek Gallaher
• Re: how to get a full path
  • From: anonymous
• How does NDIS IST and ISR work ?
  • From: darshan . tapdia
• Anyone have experience with NetEngine NP51R
  • From: Richard L Rosenheim
• Re: Connect or disconnect from network
  • From: noe
• Re: Can't create a File in xxx_Init, why?
  • From: Olivier BLOCH
• Re: CF Storage Card Question (4.2 .Net / Sandgate)
  • From: Andrew Worsley
• platfrm builder for windows mobile-5
  • From: pragya
• Re: TFAT stability
  • From: MADSAM
• Re: eboot.nb0 (DNW and nand flash)
  • From: xuhaoz
• Re: BUG? do SCAN and DEFRAG corrupt a TFAT partition with Hive-based registry
  • From: MADSAM
• Re: pxa270 resume from sleep (mainstone II)
  • From: fmelandri
• Re: pxa270 resume from sleep (mainstone II)
  • From: fmelandri
• Re: eboot.nb0 (DNW and nand flash)
  • From: Olivier BLOCH
• TransferMode Registrykey
  • From: Peter K.
• Re: OS image will not load driver.
  • From: Olivier BLOCH
• Re: TFAT stability
  • From: turnsek
• WinCE & Acer travelMate c100
  • From: omer
• Re: Can't create a File in xxx_Init, why?
  • From: xuhaoz
• ActiveSync vs Remote tools
  • From: John
• hard disk can not always be recognized on windows ce net 4.2 and x86 platform
  • From: qcq