Can I access the specific address in SD card ?
Hi:
Under the help of WINCE500,can I write a driver or a application based
on DDK or SDK in PDA to access any one chip of the flash in the SD card if
there are at least two chips of flash?
.
Relevant Pages
- Re: Squawk and Talk easy question
... I am trying to troubleshoot the squawk and talk sound ... with this sound board, and I'm not sure about the intial flash, and ... Fakers Guide: No first flash means a bad U6, ... The U1 chip now tests the first PIA U7. ... (rec.games.pinball) - Re: Recovering Data from Flash Disk
... Take a soldering iorn and unsolder the flash on both units, ... flash chip you want to recover onto the new flash drive's board. ... I hope it is only the controller chip that is ... burnt, and not the flash chip itself. ... (sci.electronics.repair) - Strange BIOS behavior
... to 1.08 was necessary before I could flash to 1.16. ... The first flash ... that bios chip was dead. ... to reprogram the chip I stumbled on a method that seemed a good one. ... (alt.comp.periphs.mainboard.asus) - Re: Question about strange flash problem
... I'm seeing a strange bug with a flash chip. ... It's an FPGA based system with flash and SRAM sharing the bus. ... way of programming are the in-system CFI routines. ... (comp.arch.embedded) - Re: Looking for suggestions for processor/module/sbc with ethernet
... > everything on one chip or module, we will be supplying our own motherboard ... used for programming. ... flash when you are looking at this size. ... different for manufacturers who are expert flash manufacturers who added a ... (comp.arch.embedded) |
|