Re: include source code in another folder?

i've played with this for a while ago with no
result. seems it doesn't work this way.


"mobilevil" <mobilevil@xxxxxxxxxx> wrote in message
news:%23fhqIe4eFHA.3616@xxxxxxxxxxxxxxxxxxxxxxx
> ops using sources don't do any good too.
> maybe it's a bug
> "Bruce Eitman (eMVP)" <beitmannospam@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote
> in message news:e5OTeMyeFHA.3808@xxxxxxxxxxxxxxxxxxxxxxx
>>I believe that the problem is that ARM_SOURCES is expected to be in an ARM
>> folder. Use SOURCES instead.
>>
>> --
>> Bruce Eitman (eMVP)
>> Senior Engineer
>> beitman AT applieddata DOT net
>>
>> Applied Data Systems
>> www.applieddata.net
>> An ISO 9001:2000 Registered Company
>> Microsoft WEP Gold-level Member
>>
>>
>> "mobilevil" <mobilevil@xxxxxxxxxx> wrote in message
>> news:u778RLxeFHA.1504@xxxxxxxxxxxxxxxxxxxxxxx
>>> i tested both
>>> ..\..
>>> and
>>> ..\\..
>>> same.
>>> and this error message is pointing to the right path right file already.
>>> :
>> (
>>> BUILD: [00:0000000008:ERRORI] Bad directory prefix:
>>> C:\WINCE500\platform\mybsp\src\csp\xllp\source\xlli_lowlev_init.s.
>>>
>>> "Anthony Pellerin" <apellerin_nospam@xxxxxxxxxxxxxxxxxxxxxx> wrote in
>>> message news:eCgZdHxeFHA.228@xxxxxxxxxxxxxxxxxxxxxxx
>>> > What about using a relative path (..\..)
>>> > This should work better
>>> > --
>>> > ----------------------------------------------------------------
>>> > Anthony Pellerin
>>> > ADENEO (ADESET)
>>> > Windows Embedded Consultant
>>> > <apellerin AT adeneo DOT adetelgroup DOT com>
>>> > http://www.adeneo.adetelgroup.com
>>> > Tél : +33 (0)4.72.18.57.77
>>> > Fax : +33 (0)4.72.18.57.78
>>> > ----------------------------------------------------------------
>>> >
>>> >
>>> > "mobilevil" <mobilevil@xxxxxxxxxx> wrote in message
>>> > news:ep2BLKweFHA.2124@xxxxxxxxxxxxxxxxxxxxxxx
>>> >> is it possible to share a source code file between two SOURCES file?
>> the
>>> >> orginal bsp offer a lib and i want to make a lite version, without
>>> >> affecting others...
>>> >>
>>> >> in source file, i have the following line
>>> >> ARM_SOURCES=\
>>> >> $(_TARGETPLATROOT)\src\csp\xllp\source\xlli_lowlev_init.s
>>> >>
>>> >> build error.
>>> >> BUILD: [00:0000000008:ERRORI] Bad directory prefix:
>>> >> C:\WINCE500\platform\mybsp\src\csp\xllp\source\xlli_lowlev_init.s.
>>> >>
>>> >
>>> >
>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: Connect to PDA without ActiveSync
    ... Bruce Eitman (eMVP) ... beitman AT applieddata DOT net ... Applied Data Systems ...
    (microsoft.public.windowsce.platbuilder)
  • Re: USB Vendor ID
    ... beitman AT applieddata DOT net ... Applied Data Systems ... An ISO 9001:2000 Registered Company ...
    (microsoft.public.windowsce.platbuilder)
  • Re: i2c
    ... Bruce Eitman (eMVP) ... beitman AT applieddata DOT net ... Applied Data Systems ...
    (microsoft.public.windowsce.platbuilder)
  • Re: How to connect to PC using serial port by AS?
    ... >> Senior Engineer ... >> beitman AT applieddata DOT net ... >> Applied Data Systems ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Windows CE 3.0
    ... beitman AT applieddata DOT net ... Applied Data Systems ... Microsoft WEP Gold-level Member ...
    (microsoft.public.windowsce.platbuilder)