TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card

From: "Jacky Ko" <jacky.ko@xxxxxxxxxxxxxxxx>
Date: Wed, 22 Jun 2005 17:21:15 +0800

Hi all,

I am developing Windows CE 5.0 on x86 Platform. I uses the TI PC Card driver
in Platform Builder for Ricoh 475II (one slot). This driver perform well
with ATADISK and NE2000 ethernet card. But only CISCO Aironet 350 can't
work, and I am sure I add CISCO driver into my image. I show some debug
message below.

If anyone is able to help I would greatly appreciate it.

Thanks,

Jacky

I found that it couldn't get PCMCIA register address, and stop at get
bfuncID
==DEBUG MESSAGE==
84123 PID:c3b9ffba TID:3a0dcd2 0x83a0da40:
CPCPcmciaCard::GetConfigureRegisterBase: Can't get PCMCIA register address.
return FAILS
84135 PID:c3b9ffba TID:c39f2802 0x83925cc4: GetCardCRC: CardGetFirstTuple
returned fails
84140 PID:c3b9ffba TID:c39f2802 0x83925cc4: PCCARD: DEBUGCHK failed in
file
E:\macallan\public\COMMON\oak\drivers\pccard\mdd\mdd_both\..\pcmciaen.cpp at
line 662

.

Follow-Ups:
- Re: TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
  - From: David Liao \(MS\)
- Re: TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
  - From: Paul G. Tobey [eMVP]

Prev by Date: Re: How to change the default Background Image?
Next by Date: Re: removing the 4K jump in eboot start up code?
Previous by thread: How to change the default Background Image?
Next by thread: Re: TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
Index(es):
- Date
- Thread

Relevant Pages

Re: PCCARD driver question
... beitman AT applieddata DOT net ... Applied Data Systems ... What I understand from this is that the device.exe first loads a driver ...
(microsoft.public.windowsce.embedded)
Re: PCCARD driver question
... I guess "CardGetNextTuple returned fails" is not so bad because it's only ... which client driver to load. ... When I look at the debugger output when inserting the card, ... Now when I put in a Flash PCCARD into the slot I get a window ...
(microsoft.public.windowsce.embedded)
Re: bad file(s)
... I think the problem is either a vider card driver. ... Or something to do with activex. ... I would try getting to control panel and removing the current video driver, it may mess up your screen settings but may get you out of the safe mode trap. ...
(microsoft.public.windows.vista.general)
Re: very confused about the pccard/pcmcia drivers in 5.0
... so CLIENT DRIVER = socket driver? ... > The new PC Card driver has a completely new interface. ... >> legacy one is called PCMCIA client driver ... >> there are new host driver architecture too. ...
(microsoft.public.windowsce.platbuilder)
SD Memory card problem
... OS is Windows CE 4.2. ... We met problem in SD card driver. ... both edge triggered mode, but while driver initial, it will set EINT18 to ...
(microsoft.public.windowsce.platbuilder)