Re: System Hangs with Hive Registry - Only when flash card present at boot

I can't build a debug image, as I do not have enough flash to hold a
large debug image. MountasBootable is only set for the IPSM, nothing
else. We only have 1 pcmcia slot, so cannot debug this problem besides
inserting retailmsg's anywhere in the code. I developed a workaround
of delaying the PCMCIA driver from loading by putting a 2 second sleep
in the code, however, this causes its own problems and would like to
avoid this. I'm curious if there is another driver that I should have
loaded before the PCMCIA driver...

.

Relevant Pages

  • Re: CE 4.2 Passive Kitl
    ... Does KITL need a separate NIC ... separate driver ... Debug Ethernet drivers are much simpler than NDIS miniports (the 'noble' ... there should be no problem to build a functionnal Debug image. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: CE 4.2 Passive Kitl
    ... KITL does not necessarily require a separate NIC, ... separate driver ... Debug Ethernet drivers are much simpler than NDIS miniports (the 'noble' ... Debug image including the Platform Manager feature as well as the Ethernet ...
    (microsoft.public.windowsce.platbuilder)
  • Re: PCMCIA Card
    ... I have included the support for PCMCIA and the registry entry shows the ... When I plug a PCMCIA CF card in the PCMCIA slot WinCE 5.0 does not detect ... The CF card is FAT formatted. ... When I run a debug image and direct the out put messages to the serial port, ...
    (microsoft.public.windowsce.platbuilder)