Re: System Hangs with Hive Registry - Only when flash card present at boot

Can you give us your debug message when system hangs?

<sean@xxxxxxx>
??????:1118872317.683450.245950@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> We have recently integrated IPSM 3.8 and hive registry (stored using
> IPSM) into our pxa270, CE 5.0 board. Everything works perfect except
> when the unit is booted with a compact flash card present. The unit
> boots all the way, but nothing is usable (ie, cannot execute an
> application, although explorer comes up and the mouse still works).
> I've tried loading the PCMCIA driver in the first boot phase to no
> avail. If I remove the hive registry component from the build,
> everything works fine again, so this is not an IPSM problem. Another
> note... CF ethernet cards work just fine at boot, its only CF storage
> cards that have problems. Lastly, if I boot the unit without a CF
> storage card present, I can insert one after the unit is booted and
> everything works fine. I have put retails msg's in the ATA Disk
> driver, and it looks like it is functioning properly... is device.exe
> or filesys.exe hanging? I can't use the remote tools to analyze the
> problem because Active Sync doesn't work (nor does anything else) when
> the flash card is present during boot. Any ideas?
>
> Sean
>


.

Relevant Pages

  • Re: System Hangs with Hive Registry - Only when flash card present at boot
    ... > We have recently integrated IPSM 3.8 and hive registry (stored ... > using IPSM) into our pxa270, ... > fine at boot, its only CF storage cards that have problems. ... > Lastly, if I boot the unit without a CF storage card present, I ...
    (microsoft.public.windowsce.platbuilder)
  • RE: Do I need to recompile my standard kernel to enable ipfw?
    ... Installation Disc Won't Boot ... FBSD-friendly UPS for home needs ... ath pccard ok on 6.1 600mhz laptop, ...
    (freebsd-questions)
  • Re: When it Rains, it Pours ....
    ... >> choice of options i.e. boot from CD, from hard drive, from floppy ... >> 'PCMCIA card' and other places. ... Exactly how one boots from 'network' ... read the first sector from the first hard disk drive into RAM, ...
    (comp.dcom.telecom)
  • Re: MCP2 on Intel 945 Mobo advice?
    ... You might try setting that and see if you can get a solitary IRQ assigned to the SBLive so that the other devices will go off and find a different IRQ. ... From other OS/2 work before, with the whole thing 'working', but with all the IRQ's the way 'it works', I thought that I would try the option during the boot run to let it examine hardware. ... So I tried Veit Kannegieser's PCIIRQ.ARJ 'force' IRQ suite off his web site both to cross research this with the PCI sniff tests as well as possibly 'fix' the IRQ for at least the SBLive 5.1 PCI add-in card. ...
    (comp.os.os2.setup.misc)
  • Re: Start up problem
    ... well my problem is the same i got a new card and i get ... >Assuming your system is set to boot from the CD-ROM ... >CD in the drive and perform a repair install as outlined ... >will then search for previous versions of Windows. ...
    (microsoft.public.windowsxp.accessibility)