microsoft.public.windowsce.platbuilder

• Thread Index

---

• KITL with Kernel Stack on ARM
  • From: Chris Edgington
• Re: real time communication problem
  • From: Amr Helmy
• Re: real time communication problem
  • From: Chris Tacke, eMVP
• Re: SDK question
  • From: Paul G. Tobey [eMVP]
• Re: How I download kernel on parallel port?
  • From: Steve Maillet \(eMVP\)
• Re: real time communication problem
  • From: Bruce Eitman \(eMVP\)
• Re: Mapping physical memory into Application space
  • From: Steve Maillet \(eMVP\)
• real time communication problem
  • From: Amr Helmy
• Re: Mapping physical memory into Application space
  • From: Zhongwei Wang
• Re: How to write special characters in platform.bib ?
  • From: Bruce Eitman \(eMVP\)
• SDK question
  • From: Tweeeek
• RE: IDispatchProxy and [out] parameters
  • From: Werner
• how can I use the D-link 530 card to link platbuilder?
  • From: taipeiasp
• RE: NDIS DPC/ISR running in same thread in CE 5.0
  • From: anonymous
• How I download kernel on parallel port?
  • From: omer
• IDispatchProxy and [out] parameters
  • From: Aaron Lawrence
• Re: Create bootable CF with application
  • From: Nicklas
• Re: XScale sleep mode
  • From: Voidcoder
• Re: Closing a thread that is waiting for Irq
  • From: Voidcoder
• Re: How to determine which ceddk api to use
  • From: K. S. Huang
• Re: How to configure the PPTP VPN server in WinCE 4.2 device?
  • From: vishva29
• Create bootable CF with application
  • From: Nicklas
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: About create a WinCE BSP
  • From: Steve Maillet \(eMVP\)
• Re: Is NdisMStartBufferPhysicalMapping a valid function in WinCE
  • From: vijaya_mit
• Re: Closing a thread that is waiting for Irq
  • From: Voidcoder
• Re: How to determine which ceddk api to use
  • From: sonu
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: How to write special characters in platform.bib ?
  • From: Yu
• About create a WinCE BSP
  • From: kemin
• Re: context questions
  • From: telus
• Re: context questions
  • From: Bruce Eitman \(eMVP\)
• context questions
  • From: telus
• Can I access the specific address in SD card ?
  • From: xuhaoz
• Re: Connect or disconnect from network
  • From: Paul G. Tobey [eMVP]
• RE: Makeimg and registries
  • From: David Jones
• Re: \Storage Card doesn't always reload when ATADISK reloaded
  • From: Steve Maillet \(eMVP\)
• How to build a ARMV4 for Intel PAX25x in WinCE 5.0
  • From: Kimo Jolin
• Re: \Storage Card doesn't always reload when ATADISK reloaded
  • From: Andrew Worsley
• Re: Closing a thread that is waiting for Irq
  • From: Andrew Worsley
• Re: \Storage Card doesn't always reload when ATADISK reloaded
  • From: Andrew Worsley
• Re: \Storage Card doesn't always reload when ATADISK reloaded
  • From: Andrew Worsley
• Re: Closing a thread that is waiting for Irq
  • From: Steve Maillet \(eMVP\)
• Re: Mapping physical memory into Application space
  • From: Steve Maillet \(eMVP\)
• Re: How to eliminate warm booting
  • From: Steve Maillet \(eMVP\)
• How to eliminate warm booting
  • From: Ralph Flaugher
• Re: Partition NTFS
  • From: Steve Maillet \(eMVP\)
• Re: CEC vs. project
  • From: Steve Maillet \(eMVP\)
• Help PostMessage Delay
  • From: wjm0874
• CEC vs. project
  • From: J Garcia
• RE: NDIS hanging during Init
  • From: "Soemin Tjong [MSFT]"
• RE: Is NdisMStartBufferPhysicalMapping a valid function in WinCE
  • From: "Soemin Tjong [MSFT]"
• RE: NDIS DPC/ISR running in same thread in CE 5.0
  • From: "Soemin Tjong [MSFT]"
• Re: Partition NTFS
  • From: Carl
• Re: Connect or disconnect from network
  • From: Carl
• Re: Makeimg and registries
  • From: J Garcia
• NDIS DPC/ISR running in same thread in CE 5.0
  • From: anonymous
• Re: Makeimg and registries
  • From: Bruce Eitman \(eMVP\)
• Re: Makeimg and registries
  • From: J Garcia
• Re: Smartphone Platform?
  • From: Dean Ramsier
• Re: Makeimg and registries
  • From: Bruce Eitman \(eMVP\)
• Re: Create bootable CF with application
  • From: Ten
• Re: Can I directly put files into ResidentFlash in platform.bib ?
  • From: YuMail
• Makeimg and registries
  • From: J Garcia
• Re: include source code in another folder?
  • From: Steve Maillet \(eMVP\)
• Re: Closing a thread that is waiting for Irq
  • From: Igge H
• Re: Mapping physical memory into Application space
  • From: viddec
• Re: \Storage Card doesn't always reload when ATADISK reloaded
  • From: Ten
• Re: Mapping physical memory into Application space
  • From: Steve Maillet \(eMVP\)
• RE: Mapping physical memory into Application space
  • From: viddec
• Re: Create bootable CF with application
  • From: Steve Maillet \(eMVP\)
• Re: How to determine which ceddk api to use
  • From: Steve Maillet \(eMVP\)
• Re: \Storage Card doesn't always reload when ATADISK reloaded
  • From: Steve Maillet \(eMVP\)
• Re: Mapping physical memory into Application space
  • From: Steve Maillet \(eMVP\)
• Re: Closing a thread that is waiting for Irq
  • From: Steve Maillet \(eMVP\)
• Smartphone Platform?
  • From: David Jones
• Scroll bars RDP
  • From: Antonio Carlos
• Re: Wince 5.0 supported USB storage devices
  • From: Bruce Eitman \(eMVP\)
• Re: include source code in another folder?
  • From: Bruce Eitman \(eMVP\)
• Re: How to write special characters in platform.bib ?
  • From: Bruce Eitman \(eMVP\)
• Is NdisMStartBufferPhysicalMapping a valid function in WinCE
  • From: vijaya_mit
• Re: How to write special characters in platform.bib ?
  • From: Yu
• Re: Wince 5.0 supported USB storage devices
  • From: <ctacke/>
• Re: How to write special characters in platform.bib ?
  • From: <ctacke/>
• Re: Create bootable CF with application
  • From: <ctacke/>
• Re: How to write special characters in platform.bib ?
  • From: Yu
• Re: Change local name of bluetooth module
  • From: Markus Moos
• Create bootable CF with application
  • From: Nicklas
• TimeOuts setting in Default power manager in WinCE4.2
  • From: xiang
• Re: Can I directly put files into ResidentFlash in platform.bib ?
  • From: Yu
• Re: XScale sleep mode
  • From: Voidcoder
• Re: How to write special characters in platform.bib ?
  • From: mobilevil
• Re: How to write special characters in platform.bib ?
  • From: Enrico Richter
• string in nb0 file?
  • From: mobilevil
• TimeOuts setting in Default power manager in WinCE4.2
  • From: xiang
• Re: which function should I use if I want to write sth into a file?
  • From: Anthony Pellerin
• How to write special characters in platform.bib ?
  • From: Yu
• Wince 5.0 supported USB storage devices
  • From: krish
• Re: which function should I use if I want to write sth into a file?
  • From: xuhaoz
• Re: Catalog issue
  • From: Voidcoder
• Re: XScale sleep mode
  • From: Voidcoder
• Re: Is there a better method to embed a application into OS image ?
  • From: Valter Minute
• Re: UDC performance on PXA270
  • From: Germano Kern
• Re: Catalog issue
  • From: Voidcoder
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: Closing a thread that is waiting for Irq
  • From: Helge Kruse
• Re: Closing a thread that is waiting for Irq
  • From: Anthony Pellerin
• Re: which function should I use if I want to write sth into a file?
  • From: Anthony Pellerin
• Re: Closing a thread that is waiting for Irq
  • From: Charles Peterson
• Re: Mapping physical memory into Application space
  • From: Anthony Pellerin
• Closing a thread that is waiting for Irq
  • From: Igge H
• How to determine which ceddk api to use
  • From: sonu
• DEBUGCHK failed in file mapfile.c at line 2257
  • From: Mark Moeller
• DEBUGCHK failed in file mapfile.c at line 2257
  • From: Mark Moeller
• Re: include source code in another folder?
  • From: Voidcoder
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: Is there a better method to embed a application into OS image ?
  • From: Yu
• Re: UDC performance on PXA270
  • From: mobilevil
• Re: include source code in another folder?
  • From: mobilevil
• Re: which function should I use if I want to write sth into a file?
  • From: xuhaoz
• Re: which function should I use if I want to write sth into a file?
  • From: xuhaoz
• \Storage Card doesn't always reload when ATADISK reloaded
  • From: Andrew Worsley
• Mapping physical memory into Application space
  • From: viddec
• Re: PB5.0 SDK export problem
  • From: Steve Maillet \(eMVP\)
• Re: PB5.0 SDK export problem
  • From: Thomas Freese
• Re: Display Driver: Testing And Debugging
  • From: vwzip
• Re: dll load address
  • From: "Russ Keldorph [MS]"
• Re: UDC performance on PXA270
  • From: Germano Kern
• Re: Display Driver: Testing And Debugging
  • From: Steve Maillet \(eMVP\)
• network configuration control panel app question in CE.NET 4.2
  • From: Ten
• Re: Exposing KernelIoControl
  • From: Steve Maillet \(eMVP\)
• Re: Is there a better method to embed a application into OS image ?
  • From: Valter Minute
• Re: Is there a better method to embed a application into OS image ?
  • From: Bruce Eitman \(eMVP\)
• Re: Is there a better method to embed a application into OS image ?
  • From: Anthony Pellerin
• Is there a better method to embed a application into OS image ?
  • From: YuMail
• Re: which function should I use if I want to write sth into a file?
  • From: Zhongwei Wang
• S3 Twister Installation Problem
  • From: Enrico Richter
• Re: unable to link lib
  • From: Zhongwei Wang
• Re: which function should I use if I want to write sth into a file?
  • From: Steve Maillet \(eMVP\)
• Re: Exposing KernelIoControl
  • From: Bruce Eitman \(eMVP\)
• Re: How to change the default folder options in PB5.0
  • From: Bruce Eitman \(eMVP\)
• Re: How to change the default folder options in PB5.0
  • From: Bruce Eitman \(eMVP\)
• Re: Problems about desktop!
  • From: Bruce Eitman \(eMVP\)
• Re: XScale sleep mode
  • From: AJM42
• RE: NDIS Optimized Receive Handling in CE 5.0
  • From: anonymous
• Re: XScale sleep mode
  • From: AJM42
• Re: PB5.0 SDK export problem
  • From: Derek Gallaher
• Re: Exposing KernelIoControl
  • From: Dave Findlay
• Re: UDC performance on PXA270
  • From: Voidcoder
• RE: include source code in another folder?
  • From: Ken Christensen
• Re: XScale sleep mode
  • From: AJM42
• Can Uboot Code be used to bring up WINCE 5.0 Kernel
  • From: Satish
• Re: UDC performance on PXA270
  • From: mobilevil
• Re: include source code in another folder?
  • From: mobilevil
• Re: unable to link lib
  • From: Anthony Pellerin
• Re: unable to link lib
  • From: vih
• Re: include source code in another folder?
  • From: mobilevil
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: which function should I use if I want to write sth into a file?
  • From: xuhaoz
• Re: which function should I use if I want to write sth into a file?
  • From: Anthony Pellerin
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: Does AVI supported by Windows Media Player9 ?
  • From: jackzhao
• Re: How to change the default folder options in PB5.0
  • From: jackzhao
• Re: include source code in another folder?
  • From: Yannick Chamming's [eMVP]
• Re: UDC performance on PXA270
  • From: mobilevil
• Re: Multiple Interface USB Class driver loading in CE5.0 for OHCD
  • From: Michael AMSELLEM
• Re: which function should I use if I want to write sth into a file?
  • From: xuhaoz
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: How to change the default folder options in PB5.0
  • From: Anthony Pellerin
• Re: which function should I use if I want to write sth into a file?
  • From: Anthony Pellerin
• Re: Problems about desktop!
  • From: jackzhao
• Re: How to change the default folder options in PB5.0
  • From: jackzhao
• Windows Messenger connect fail!
  • From: jackzhao
• Display Driver: Testing And Debugging
  • From: vwzip
• Re: include source code in another folder?
  • From: mobilevil
• Re: which function should I use if I want to write sth into a file?
  • From: xuhaoz
• Re: How to change the default folder options in PB5.0
  • From: Thomas Freese
• Re: PB5.0 SDK export problem
  • From: Steve Maillet \(eMVP\)
• Re: PB5.0 SDK export problem
  • From: Thomas Freese
• Re: PB5.0 SDK export problem
  • From: Thomas Freese
• Re: PB5.0 SDK export problem
  • From: Thomas Freese
• Re: Catalog issue
  • From: Christopher Le [MS]
• Re: SDK Development problems
  • From: Christopher Le [MS]
• Re: PB5.0 SDK export problem
  • From: Christopher Le [MS]
• Re: PB5.0 SDK export problem
  • From: Christopher Le [MS]
• Re: How to change the default folder options in PB5.0
  • From: Bruce Eitman \(eMVP\)
• Re: Exposing KernelIoControl
  • From: Bruce Eitman \(eMVP\)
• Exposing KernelIoControl
  • From: Dave Findlay
• Re: How to change the default folder options in PB5.0
  • From: Thomas Freese
• Re: PB5.0 SDK export problem
  • From: Thomas Freese
• Re: Build starting point
  • From: Steve Maillet \(eMVP\)
• Re: Build starting point
  • From: J Garcia
• Re: Build starting point
  • From: J Garcia
• Re: SDK Development problems
  • From: Thomas Freese
• Re: Build starting point
  • From: Steve Maillet \(eMVP\)
• Re: interprocess communciation
  • From: John Spaith [MS]
• Re: How to change the default folder options in PB5.0
  • From: Steve Maillet \(eMVP\)
• Re: OEM
  • From: Steve Maillet \(eMVP\)
• Re: Screen rotation in PB5.0
  • From: Steve Maillet \(eMVP\)
• Re: RDP Printers Disable winCE5.0
  • From: mfr
• Re: include source code in another folder?
  • From: Bruce Eitman \(eMVP\)
• Build starting point
  • From: J Garcia
• CE5.0 with multiple network cards - image hangs
  • From: rusakov2
• Re: include source code in another folder?
  • From: mobilevil
• Re: include source code in another folder?
  • From: Anthony Pellerin
• Re: UDC performance on PXA270
  • From: mobilevil
• Re: UDC performance on PXA270
  • From: mobilevil
• RE: Does AVI supported by Windows Media Player9 ?
  • From: junho.yoon
• RE: RDP Printers Disable winCE5.0
  • From: junho.yoon
• Multiple Interface USB Class driver loading in CE5.0 for OHCD
  • From: Ajay
• Re: Screen rotation in PB5.0
  • From: <ctacke/>
• Re: UDC performance on PXA270
  • From: mobilevil
• include source code in another folder?
  • From: mobilevil
• Re: interprocess communciation
  • From: sonu
• Re: interprocess communciation
  • From: Anthony Pellerin
• interprocess communciation
  • From: sonu
• interprocess communciation
  • From: sonu
• Re: Screen rotation in PB5.0
  • From: Anthony Pellerin
• Re: Problems about desktop!
  • From: Hans
• Re: Screen rotation in PB5.0
  • From: jackzhao
• Re: unable to link lib
  • From: Anthony Pellerin
• Re: OEM
  • From: Anthony Pellerin
• Re: Screen rotation in PB5.0
  • From: Anthony Pellerin
• Re: which function should I use if I want to write sth into a file?
  • From: Anthony Pellerin
• How to change the default folder options in PB5.0
  • From: jackzhao
• Does AVI supported by Windows Media Player9 ?
  • From: jackzhao
• Problems about desktop!
  • From: jackzhao
• Connect or disconnect from network
  • From: DidierW
• OEM
  • From: keshav
• RE: usb mass storage client driver
  • From: jt
• which function should I use if I want to write sth into a file?
  • From: xuhaoz
• Screen rotation in PB5.0
  • From: jackzhao
• Debuging application in emulator
  • From: jackzhao
• How to expand memory size in emulator?
  • From: jackzhao
• RE: Problem locating Afxinet.h under some configurations
  • From: Asang Dani
• RE: usb mass storage client driver
  • From: Asang Dani
• RE: usb mass storage client driver
  • From: jt
• Re: gpio0 interrupt problem
  • From: Rona
• Re: PXA-255 reference boot loader source required
  • From: Rona
• Re: unable to link lib
  • From: vih
• NDIS hanging during Init
  • From: Bryan Bassett
• SMSC 91C111 in CE 5.0
  • From: anonymous
• Re: unable to link lib
  • From: Bruce Eitman \(eMVP\)
• Re: OEM ADDRESS TABLE
  • From: Voidcoder
• unable to link lib
  • From: vih
• Problem with USB Bluetooth debug build
  • From: Clyde
• RE: CPU Utilization Changing with Remote Tools
  • From: Kav
• Re: OEM ADDRESS TABLE
  • From: Kav
• Re: OEM ADDRESS TABLE
  • From: Steve Maillet \(eMVP\)
• Re: OEM ADDRESS TABLE
  • From: Kav
• Re: Fonts and Licensing
  • From: Steve Maillet \(eMVP\)
• Re: Fonts and Licensing
  • From: Bruce Eitman \(eMVP\)
• Problem locating Afxinet.h under some configurations
  • From: dice
• Re: Fonts and Licensing
  • From: dice
• Re: Fonts and Licensing
  • From: Steve Maillet \(eMVP\)
• Re: Fonts and Licensing
  • From: dice
• Re: Fonts and Licensing
  • From: Steve Maillet \(eMVP\)
• Fonts and Licensing
  • From: dice
• Re: CETK Tests for NAND Flash
  • From: Steve Maillet \(eMVP\)
• Re: OEM ADDRESS TABLE
  • From: Steve Maillet \(eMVP\)
• Re: Cursor Support
  • From: Steve Maillet \(eMVP\)
• Re: CETK Tests for NAND Flash
  • From: Dean Ramsier
• RE: Cursor Support
  • From: Ken Christensen
• Re: Cursor Support
  • From: Bill T
• Re: TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
  • From: Jacky Ko
• Re: PXA-255 reference boot loader source required
  • From: Arun Prasad Velu
• CETK Tests for NAND Flash
  • From: ms_noida
• Re: May be a IE bug ?
  • From: Voidcoder
• Re: UDC performance on PXA270
  • From: Voidcoder
• Re: UDC performance on PXA270
  • From: Voidcoder
• RE: NDIS Custom Driver Bindings Problem PB 5.0
  • From: JR Malin
• RE: usb mass storage client driver
  • From: Asang Dani
• Re: OEM ADDRESS TABLE
  • From: Voidcoder
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Voidcoder
• Re: PXA-255 reference boot loader source required
  • From: Arun Prasad Velu
• UDC performance on PXA270
  • From: Voidcoder
• Re: UDC performance on PXA270
  • From: K. S. Huang
• Re: Cursor Support
  • From: Steve Maillet \(eMVP\)
• RE: OEM ADDRESS TABLE
  • From: Kav
• Re: Application in PB
  • From: Kav
• RE: Shadowing - FILES section files (CE 5.0)
  • From: Gary Metalle
• Re: How do I include the CETK dlls in an emulator image?
  • From: Tom Moon
• RE: OEM ADDRESS TABLE
  • From: Sujith
• Re: Shadowing - FILES section files (CE 5.0)
  • From: "Susan Loh [MS]"
• RE: CPU Utilization Changing with Remote Tools
  • From: "Susan Loh [MS]"
• Re: Cursor Support
  • From: Paul G. Tobey [eMVP]
• Re: Cursor Support
  • From: Bill T
• Re: Cursor Support
  • From: Paul G. Tobey [eMVP]
• Re: Cursor Support
  • From: Paul G. Tobey [eMVP]
• Cursor Support
  • From: Bill T
• Re: SetSystemMemoryDivision kills my display?
  • From: Chris Tacke, eMVP
• usb mass storage client driver
  • From: jt
• Re: TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
  • From: Paul G. Tobey [eMVP]
• NDIS Optimized Receive Handling in CE 5.0
  • From: anonymous
• Re: Application in PB
  • From: J Garcia
• Re: TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
  • From: David Liao \(MS\)
• CPU Utilization Changing with Remote Tools
  • From: Kav
• RE: SetSystemMemoryDivision kills my display?
  • From: Kav
• Re: SetSystemMemoryDivision kills my display?
  • From: Steve Maillet \(eMVP\)
• RE: Unable to initialize the catalog
  • From: Vinnie
• Re: Application in PB
  • From: Chris Tacke, eMVP
• SetSystemMemoryDivision kills my display?
  • From: Chris Tacke, eMVP
• Application in PB
  • From: J Garcia
• RE: PXA-255 reference boot loader source required
  • From: Ken Christensen
• Re: XScale sleep mode
  • From: Danny
• ANN: BSP Consultant Needed
  • From: HR Mgr
• Re: UDC performance on PXA270
  • From: mobilevil
• Re: Shadowing - FILES section files (CE 5.0)
  • From: Dean Ramsier
• Re: power management issue of WinCE 5.0
  • From: Dean Ramsier
• Re: Can I directly put files into ResidentFlash in platform.bib ?
  • From: Dean Ramsier
• Re: removing the 4K jump in eboot start up code?
  • From: Steve Maillet \(eMVP\)
• Re: PXA27x / IXP4xx CE5.0 BSPs production readiness?
  • From: Steve Maillet \(eMVP\)
• Re: UDC performance on PXA270
  • From: mobilevil
• Re: removing the 4K jump in eboot start up code?
  • From: mobilevil
• Re: UDC performance on PXA270
  • From: mobilevil
• Re: UDC performance on PXA270
  • From: Germano Kern
• Re: SSL
  • From: Michael AMSELLEM
• Re: PXA-255 reference boot loader source required
  • From: Andrew at Plextek
• PXA27x / IXP4xx CE5.0 BSPs production readiness?
  • From: Andrew at Plextek
• Issue: netcard driver with hive-based registry in Gateway Platform
  • From: maiya
• OEM ADDRESS TABLE
  • From: keshav
• PXA-255 reference boot loader source required
  • From: Arun Prasad Velu
• DirectDraw
  • From: James
• Re: Some questions about the PC Card driver on WinCE5.0
  • From: bird
• Re: dll load address
  • From: marcos
• Re: Can I directly put files into ResidentFlash in platform.bib ?
  • From: Yu
• Re: flash write problem
  • From: Anthony Pellerin
• Mass Storage USB Function Driver on PXA27x Working! (Almost)
  • From: Germano Kern
• Re: removing the 4K jump in eboot start up code?
  • From: Wang Yeqing
• power management issue of WinCE 5.0
  • From: Sanjeev
• RE: Cannot download image to target (CE 5.0)
  • From: Simon Pardoe
• Re: Shadowing - FILES section files (CE 5.0)
  • From: Gary Metalle
• flash write problem
  • From: Andy Shi
• Re: removing Unfilled ROM holes
  • From: mobilevil
• Re: TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
  • From: Jacky Ko
• Re: KernelFindMemory and cache write-back
  • From: John Eldridge [MSFT]
• Re: Corrupt mouse cursor
  • From: Bill T
• Re: How do I include the CETK dlls in an emulator image?
  • From: Steve Maillet \(eMVP\)
• How do I include the CETK dlls in an emulator image?
  • From: Tom Moon
• Re: SSL
  • From: Igor Dvorkin [MS]
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Andrew
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Steve Maillet \(eMVP\)
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Andrew
• Re: Bug in the PB 5.00 ARM compiler? Surely not.
  • From: gerrit
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Steve Maillet \(eMVP\)
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Andrew
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Paul G. Tobey [eMVP]
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Andrew
• Re: Screen gets cleared when CE boots
  • From: Bill T
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Martin
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Paul G. Tobey [eMVP]
• What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Andrew
• Re: What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Steve Maillet \(eMVP\)
• What's in an SDK? Do you need one if Platform Builder is on the same machine?
  • From: Andrew
• Sample App Programm to Play Sample DirectShow Ball Filter
  • From: Rui Tang
• Re: dll load address
  • From: "Russ Keldorph [MS]"
• Re: Where is the code to copy file to storage memory ?
  • From: Steve Maillet \(eMVP\)
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Steve Maillet \(eMVP\)
• Re: Bug in the PB 5.00 ARM compiler? Surely not.
  • From: "Russ Keldorph [MS]"
• Re: Problem seeing OutputDebugStrings output from CE 5.0 target
  • From: Steve Maillet \(eMVP\)
• Re: MFC Application in O/S Image
  • From: Jay Daniel
• Re: Bug in the PB 5.00 ARM compiler? Surely not.
  • From: Steve Maillet \(eMVP\)
• Re: TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
  • From: Paul G. Tobey [eMVP]
• Re: removing Unfilled ROM holes
  • From: Steve Maillet \(eMVP\)
• Re: Where is the code to copy file to storage memory ?
  • From: Charles Peterson
• Re: MFC Application in O/S Image
  • From: Bruce Eitman \(eMVP\)
• Re: Bug in the PB 5.00 ARM compiler? Surely not.
  • From:
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Martin
• Re: removing Unfilled ROM holes
  • From: Dean Ramsier
• Re: MFC Application in O/S Image
  • From: Dean Ramsier
• Re: removing the 4K jump in eboot start up code?
  • From: mobilevil
• Re: removing Unfilled ROM holes
  • From: mobilevil
• Problem seeing OutputDebugStrings output from CE 5.0 target
  • From: Avi Shmidman
• Re: Bug in the PB 5.00 ARM compiler? Surely not.
  • From:
• RE: MFC Application in O/S Image
  • From: Jay Daniel
• Re: removing Unfilled ROM holes
  • From: Steve Maillet \(eMVP\)
• Re: Can I directly put files into ResidentFlash in platform.bib ?
  • From: Steve Maillet \(eMVP\)
• Re: removing Unfilled ROM holes
  • From: Ten
• Re: Bug in the PB 5.00 ARM compiler? Surely not.
  • From: Steve Maillet \(eMVP\)
• Re: removing the 4K jump in eboot start up code?
  • From: Steve Maillet \(eMVP\)
• May be a IE bug ?
  • From: Lefthand
• Re: KernelFindMemory and cache write-back
  • From: Dean Ramsier
• Re: how to disable the destop window, as only the application window run.
  • From: Steve Maillet \(eMVP\)
• Re: ROMOFFSET
  • From: Steve Maillet \(eMVP\)
• Re: Corrupt mouse cursor
  • From: Dean Ramsier
• Re: dll load address
  • From: marcos
• Re: removing Unfilled ROM holes
  • From: Dean Ramsier
• Re: dll load address
  • From: Dean Ramsier
• ActiveSync compatibility with CE 5.0
  • From: Alain
• Firewire storage on CEPC
  • From: Marc Peter
• Re: Can I directly put files into ResidentFlash in platform.bib ?
  • From: Bruce Eitman \(eMVP\)
• Can I directly put files into ResidentFlash in platform.bib ?
  • From: Yu
• dll load address
  • From: marcos
• Re: Corrupt mouse cursor
  • From: Bill T
• Re: Bug in the PB 5.00 ARM compiler? Surely not.
  • From:
• Re: Device driver context
  • From: JoeB
• Re: Screen gets cleared when CE boots
  • From: Voidcoder
• Ndis wlan driver porting, ISR and dma issues
  • From: vijaya_mit
• Re: Screen gets cleared when CE boots
  • From: Voidcoder
• Re: removing the 4K jump in eboot start up code?
  • From: andreolkovisky
• TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card
  • From: Jacky Ko
• Re: How to change the default Background Image?
  • From: Anthony Pellerin
• Re: TOC
  • From: Voidcoder
• How to change the default Background Image?
  • From: jackzhao
• removing Unfilled ROM holes
  • From: mobilevil
• removing the 4K jump in eboot start up code?
  • From: mobilevil
• RDP Printers Disable winCE5.0
  • From: junho.yoon
• Re: how to disable the destop window, as only the application window run.
  • From: JoeB
• RDP Printer Disable in Windows CE 5.0
  • From: junho.yoon
• Re: TOC
  • From: Voidcoder
• Re: ROMOFFSET
  • From: Anthony Pellerin
• Re: how to disable the destop window, as only the application window run.
  • From: Anthony Pellerin
• Re: How to build DShow Filter samples
  • From: Rui Tang
• Image download to CEPC leads to blank screen
  • From: Michael Lofgren
• how to disable the destop window, as only the application window run.
  • From: kannel
• ROMOFFSET
  • From: keshav
• Re: no jump in reset vector
  • From: keshav
• Re: Where is the code to copy file to storage memory ?
  • From: Yu
• How to build DShow Filter samples
  • From: Rui Tang
• Re: Where is the code to copy file to storage memory ?
  • From: Steve Maillet \(eMVP\)
• Where is the code to copy file to storage memory ?
  • From: Yu
• Running prelink.bat in eboot build
  • From: Nguyen Nguyen
• Unable to initialize the catalog
  • From: Vinnie
• Aspen PCMCIA bug (4.2) and question
  • From: Andrew Worsley
• Re: Corrupt mouse cursor
  • From: Steve Maillet \(eMVP\)
• Re: USB RNDIS KITL Super Slow
  • From: Chris Edgington
• Re: Screen gets cleared when CE boots
  • From: Bill T
• Corrupt mouse cursor
  • From: Bill T
• hooking the PlaySound function
  • From: Adrian
• Re: *.wmv version 8 files doesn't play in WinCE 5.0
  • From: Charles Peterson
• Re: Bug in the PB 5.00 ARM compiler? Surely not.
  • From: Doug Cook [MSFT]
• Re: Conditionnal includes in sources
  • From: Doug Cook [MSFT]
• Re: boot.bib
  • From: adam karbasi
• RE: config.bib
  • From: adam karbasi
• RE: build err: tchmain.lib
  • From: adam karbasi
• USB Function controller Mass storage command not supported
  • From: Rams
• Re: *.wmv version 8 files doesn't play in WinCE 5.0
  • From: Damon Barry [MSFT]
• Re: how to use a BMP file instead of bitmap [] to display logo in PXA2
  • From: Bruce Eitman \(eMVP\)
• Re: how to use a BMP file instead of bitmap [] to display logo in PXA2
  • From: Steve Maillet \(eMVP\)
• Re: Device driver context
  • From: Steve Maillet \(eMVP\)
• Re: KernelFindMemory and cache write-back
  • From: Steve Maillet \(eMVP\)
• Re: Screen gets cleared when CE boots
  • From: Steve Maillet \(eMVP\)
• Re: Device driver context
  • From: JoeB
• KernelFindMemory and cache write-back
  • From: Jean-Jacques Hiblot
• Re: Screen gets cleared when CE boots
  • From: Bill T
• Re: Screen gets cleared when CE boots
  • From: Bill T
• Re: Screen gets cleared when CE boots
  • From: Steve Maillet \(eMVP\)
• Re: how to use a BMP file instead of bitmap [] to display logo in PXA2
  • From: Bruce Eitman \(eMVP\)
• Re: sysgen error
  • From: Steve Maillet \(eMVP\)
• Re: sysgen error
  • From: Dean Ramsier
• Re: how to use a BMP file instead of bitmap [] to display logo in PXA2
  • From: gerrit
• Re: DBGBRK when calling WaitForMultipleObjects(..)
  • From: Voidcoder
• Screen gets cleared when CE boots
  • From: Bill T
• Re: Device driver context
  • From: Steve Maillet \(eMVP\)
• Re: gpio0 interrupt problem
  • From: Steve Maillet \(eMVP\)
• Re: Change local name of bluetooth module
  • From: Anthony Pellerin
• Re: gpio0 interrupt problem
  • From: Rona
• Re: Device driver context
  • From: JoeB
• USB storage
  • From: krish
• Re: null TOC
  • From: Steve Maillet \(eMVP\)
• Re: TOC
  • From: Steve Maillet \(eMVP\)
• Re: null TOC
  • From: Steve Maillet \(eMVP\)
• nk
  • From: keshav
• null TOC
  • From: keshav
• Re: no jump in reset vector
  • From: Valter Minute
• Re: Cant stop interrupts
  • From: Valter Minute
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Voidcoder
• wavedev driver problem: WAIT oupint failed
  • From: zhangchunzhong
• TOC
  • From: keshav
• USB Mass Storage Function question
  • From: superfluent
• RE: Change local name of bluetooth module
  • From: "Fernando Gonzalez [MS]"
• pTOC
  • From: keshav
• Re: how to use a BMP file instead of bitmap [] to display logo in PXA2
  • From: mobilevil
• how to use a BMP file instead of bitmap [] to display logo in PXA2
  • From: pth
• Re: no jump in reset vector
  • From: keshav
• Re: null TOC
  • From: keshav
• pTOC
  • From: keshav
• build err: tchmain.lib
  • From: Lee Lee
• Re: Can I reserve some memory for system use ?
  • From: Yu
• Re: null TOC
  • From: Wang Yeqing
• How to test USB Host RNDIS for WCE 5.0?
  • From: Thomas Peng
• Bug in the PB 5.00 ARM compiler? Surely not.
  • From: gerrit
• pcl driver for windows ce 5.0
  • From: starlit
• Re: Cant stop interrupts
  • From: Steve Maillet \(eMVP\)
• Re: NDIS Custom Driver Bindings Problem PB 5.0
  • From: JR Malin
• Re: PB5.0 SDK export problem
  • From: Andrew
• Re: PB5.0 SDK export problem
  • From: Derek Gallaher
• Cant stop interrupts
  • From: JoeB
• Re: Some questions about the PC Card driver on WinCE5.0
  • From: David Liao \(MS\)
• Re: PB5.0 SDK export problem
  • From: Paul G. Tobey [eMVP]
• Re: DBGBRK when calling WaitForMultipleObjects(..)
  • From: JoeB
• Re: PB5.0 SDK export problem
  • From: Steve Maillet \(eMVP\)
• Re: no jump in reset vector
  • From: Steve Maillet \(eMVP\)
• Re: DBGBRK when calling WaitForMultipleObjects(..)
  • From: Steve Maillet \(eMVP\)
• Re: boot.bib
  • From: Steve Maillet \(eMVP\)
• Re: boot.bib
  • From: Steve Maillet \(eMVP\)
• SSL
  • From: Michael AMSELLEM
• DBGBRK when calling WaitForMultipleObjects(..)
  • From: JoeB
• Re: PB5.0 SDK export problem
  • From: Derek Gallaher
• no jump in reset vector
  • From: keshav
• Re: boot.bib
  • From: keshav
• Re: sysgen error
  • From: Steve Maillet \(eMVP\)
• null TOC
  • From: keshav
• Re: boot.bib
  • From: Steve Maillet \(eMVP\)
• boot.bib
  • From: keshav
• config.bib
  • From: keshav
• Re: sysgen error
  • From: Dean Ramsier
• Re: NdisIMDeInitializeDeviceInstance Crashing
  • From: madhur . nagar
• Re: " Excluded From Build "
  • From: JoeB
• Change local name of bluetooth module
  • From: Markus Moos
• Problem with CETK 5.0 USB Port testing
  • From: Eno
• Cannot download image to target (CE 5.0)
  • From: Simon Pardoe
• Re: Can I reserve some memory for system use ?
  • From: Steve Maillet \(eMVP\)
• Re: midi in wavedev driver
  • From: zhangchunzhong
• Can I reserve some memory for system use ?
  • From: Yu
• Re: Download terminates immediately. Why?
  • From: Steve Maillet \(eMVP\)
• Howto: USB Function Controller load/unload clients
  • From: rscala
• Re: Download terminates immediately. Why?
  • From: Kevin Sitterell
• Re: Download terminates immediately. Why?
  • From: Steve Maillet \(eMVP\)
• Re: Download terminates immediately. Why?
  • From: Kevin Sitterell
• Re: Download terminates immediately. Why?
  • From: Kevin Sitterell
• Re: Download terminates immediately. Why?
  • From: Steve Maillet \(eMVP\)
• Download terminates immediately. Why?
  • From: Kevin Sitterell
• Re: gpio0 interrupt problem
  • From: Steve Maillet \(eMVP\)
• Re: gpio0 interrupt problem
  • From: Rona
• Re: Some questions about the PC Card driver on WinCE5.0
  • From: bird
• Re: Debug output
  • From: Steve Maillet \(eMVP\)
• RE: A problem about bluetooth AGserver
  • From: "Fernando Gonzalez [MS]"
• Re: Debug output
  • From: ms
• Re: Debug output
  • From: Steve Maillet \(eMVP\)
• Re: Debug output
  • From: ms
• Re: Debug output
  • From: Helge Kruse
• Re: NETCF v2 with platform builder?
  • From: Steve Maillet \(eMVP\)
• NETCF v2 with platform builder?
  • From: Charles Peterson
• Re: CETK
  • From: Steve Maillet \(eMVP\)
• CETK
  • From: zsc
• Re: Can I know how many drivers were loaded by Device Manager?
  • From: Voidcoder
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Voidcoder
• Re: Some questions about the PC Card driver on WinCE5.0
  • From: bird
• Re: Can anybody be kind enough to tell me what this mean?
  • From: Steve Maillet \(eMVP\)
• Re: Can anybody be kind enough to tell me what this mean?
  • From: xuhaoz
• Re: Can anybody be kind enough to tell me what this mean?
  • From: xuhaoz
• Re: Can anybody be kind enough to tell me what this mean?
  • From: Steve Maillet \(eMVP\)
• Re: Can anybody be kind enough to tell me what this mean?
  • From: xuhaoz
• Re: Can anybody be kind enough to tell me what this mean?
  • From: Steve Maillet \(eMVP\)
• Re: Can anybody be kind enough to tell me what this mean?
  • From: xuhaoz
• Re: Can anybody be kind enough to tell me what this mean?
  • From: xuhaoz
• Re: NDIS Custom Driver Bindings Problem PB 5.0
  • From: Steve Maillet \(eMVP\)
• NDIS Custom Driver Bindings Problem PB 5.0
  • From: JR Malin
• Re: how to install a driver on the PDA?
  • From: HKim
• Re: sysgen error
  • From: Samir Sapra [MSFT]
• Re: XP SP2
  • From: RT
• USB to Serial device driver for CE.NET 4.2
  • From: Brian Moore
• Re: Power button in Unattended vs Suspend
  • From: David Liao \(MS\)
• Re: System Hangs with Hive Registry - Only when flash card present at boot
  • From: sean
• Re: pcl driver for windows ce 4.2
  • From: Gary Daniels [MS]
• Re: eboot and MSFlash
  • From: Paolo
• Re: sysgen error
  • From: Keaven Pineau
• Re: " Excluded From Build "
  • From: Keaven Pineau
• RE: midi in wavedev driver
  • From: Andrew Raffman
• RE: 802.11b CF WIRELESS LAN CARD CAN'T BE INSTALLED
  • From: Martin
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Martin
• Re: Conditionnal includes in sources
  • From: Dave Heil \(exMVP\)
• Re: " Excluded From Build "
  • From: ms
• pcl driver for windows ce 4.2
  • From: iqm
• Re: " Excluded From Build "
  • From: Bruce Eitman \(eMVP\)
• Re: " Excluded From Build "
  • From: JoeB
• Conditionnal includes in sources
  • From: Keaven Pineau
• Re: " Excluded From Build "
  • From: ms
• Re: 802.11b CF WIRELESS LAN CARD CAN'T BE INSTALLED
  • From: Paul G. Tobey [eMVP]
• Re: " Excluded From Build "
  • From: JoeB
• Re: Can anybody be kind enough to tell me what this mean?
  • From: Steve Maillet \(eMVP\)
• Re: Debug output
  • From: Steve Maillet \(eMVP\)
• Problems getting com16550 driver to load.
  • From: Mike M.
• Re: Can anybody be kind enough to tell me what this mean?
  • From: xuhaoz
• Re: Can anybody be kind enough to tell me what this mean?
  • From: xuhaoz
• Re: " Excluded From Build "
  • From: ms
• Re: Debug output
  • From: Dean Ramsier
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Steve Maillet \(eMVP\)
• Re: Wireless NIC not found by OS when HD is plugged in
  • From: Ten
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Bruce Eitman \(eMVP\)
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Daniel Deschamps Soares
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Steve Maillet \(eMVP\)
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Steve Maillet \(eMVP\)
• Re: XP SP2
  • From: Steve Maillet \(eMVP\)
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Bruce Eitman \(eMVP\)
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Daniel Deschamps Soares
• Re: How to see the "Release" directory
  • From: Bruce Eitman \(eMVP\)
• Re: why my stream driver function XXX_Open is called right after X
  • From: Steve Maillet \(eMVP\)
• Re: Can anybody be kind enough to tell me what this mean?
  • From: Steve Maillet \(eMVP\)
• Re: Device driver context
  • From: Steve Maillet \(eMVP\)
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Steve Maillet \(eMVP\)
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Steve Maillet \(eMVP\)
• Can not refresh the contents of SD ??
  • From: Yu
• Power button in Unattended vs Suspend
  • From: Aurea
• Re: Device driver context
  • From: JoeB
• " Excluded From Build "
  • From: JoeB
• XP SP2
  • From: RT
• Re: How to make new vbridge.lib after modifying vbridge.c?
  • From: VictorFang
• Can anybody be kind enough to tell me what this mean?
  • From: xuhaoz
• CAB Installer on headless devices
  • From: Melchor Varela
• Re: Debug output
  • From: ms
• Re: Can I know how many drivers were loaded by Device Manager?
  • From: Anthony Pellerin
• Re: How to see the "Release" directory
  • From: Hans
• How to see the "Release" directory
  • From: Veerasivakumar
• midi in wavedev driver
  • From: zhangchunzhong
• Can I know how many drivers were loaded by Device Manager?
  • From: xuhaoz
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Voidcoder
• Re: why my stream driver function XXX_Open is called right after X
  • From: ymir
• 802.11b CF WIRELESS LAN CARD CAN'T BE INSTALLED
  • From: Light King
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Daniel Deschamps Soares
• Re: Getting Interrupt IN pipe data in USB-OHCI host side in WinCE 5.0
  • From: Ajay
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Tom
• Re: BSP for Intel Sitsang/PXA255 development board
  • From: Steve Maillet \(eMVP\)
• Re: Catalog issue
  • From: Christopher Le [MS]
• Re: Catalog issue
  • From: Christopher Le [MS]
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Steve Maillet \(eMVP\)
• Re: How to configure the PPTP VPN server in WinCE 4.2 device?
  • From: Yuanlei Sun
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Tom
• BSP for Intel Sitsang/PXA255 development board
  • From: Daniel Deschamps Soares
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Steve Maillet \(eMVP\)
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Tom
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Steve Maillet \(eMVP\)
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Tom
• Re: How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Steve Maillet \(eMVP\)
• How-to remove errant library reference (COMMCTRL) from my platform configuration ??
  • From: Tom
• Re: Debug output
  • From: Dean Ramsier
• Re: Scanner not working in my WCE 4.2 image
  • From: Paul G. Tobey [eMVP]
• Re: Use of CreateFile with Serial port
  • From: ms
• Re: Use of CreateFile with Serial port
  • From: JR Lyon
• Scanner not working in my WCE 4.2 image
  • From: Veerasivakumar
• Re: Wireless NIC not found by OS when HD is plugged in
  • From: Paul G. Tobey [eMVP]
• Re: Use of CreateFile with Serial port
  • From: Paul G. Tobey [eMVP]
• Slot 2 problem on PCMCIA (Geode)
  • From: Nicklas
• Debug output
  • From: ms
• Re: Use of CreateFile with Serial port
  • From: JR Lyon
• Re: Platform Builder 5 cant see BOOTME requests
  • From: Midge
• Wireless NIC not found by OS when HD is plugged in
  • From: Ten
• Re: System Hangs with Hive Registry - Only when flash card present at boot
  • From: sean
• Re: Getting Interrupt IN pipe data in USB-OHCI host side in WinCE 5.0
  • From: David Liao \(MS\)
• Re: USB Client storage ( David Liao come in)
  • From: David Liao \(MS\)
• Re: Some questions about the PC Card driver on WinCE5.0
  • From: David Liao \(MS\)
• Re: install unloading driver?
  • From: Steve Maillet \(eMVP\)
• Re: why my stream driver function XXX_Open is called right after X
  • From: Steve Maillet \(eMVP\)
• SMDK2410 WinCE5 Boot loader
  • From: bob
• Re: why my stream driver function XXX_Open is called right after X
  • From: ymir
• install unloading driver?
  • From: J Garcia
• Re: PB5 Issue
  • From: valrub
• Re: PB5 Issue
  • From: valrub
• Re: How to make new vbridge.lib after modifying vbridge.c?
  • From: Steve Maillet \(eMVP\)
• Re: Getting Interrupt IN pipe data in USB-OHCI host side in WinCE 5.0
  • From: Steve Maillet \(eMVP\)
• Re: Device driver context
  • From: Steve Maillet \(eMVP\)
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Bruce Eitman \(eMVP\)
• Use of CreateFile with Serial port
  • From: ms
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Voidcoder
• Re: Windows ce 4.2 Hive problem
  • From: Oliver Münchow
• Re: Device driver context
  • From: JoeB
• Re: Device driver context
  • From: Anthony Pellerin
• Re: How to make new vbridge.lib after modifying vbridge.c?
  • From: vijayaraju . k
• Re: Failed test GDI case on Magneto
  • From: y . HuaWang
• Device driver context
  • From: JoeB
• How to make new vbridge.lib after modifying vbridge.c?
  • From: VictorFang
• Re: System Hangs with Hive Registry - Only when flash card present at boot
  • From: Valter Minute
• Re: Partition NTFS
  • From: Valter Minute
• Re: Altering Code for Suspend Button under WinCE 4.2 .NET
  • From: Voidcoder
• Re: CEMON.EXE hangs when closing application
  • From: Voidcoder
• Re: Partition NTFS
  • From: Mr Fixit
• Re: eboot and MSFlash
  • From: Anthony Pellerin
• Re: Microsoft .NET Compact Framework
  • From: Tweeeek
• Re: ROMBOOT GEODE Question
  • From: Macro leon
• Re: Catalog issue
  • From: Voidcoder
• Re: Export Emulator SDK not include headers and libs!
  • From: VictorFang
• Re: gpio0 interrupt problem
  • From: Piet
• Re: CEMON.EXE hangs when closing application
  • From: Voidcoder
• Getting Interrupt IN pipe data in USB-OHCI host side in WinCE 5.0
  • From: Ajay
• Re: Catalog issue
  • From: Voidcoder
• Re: System Hangs with Hive Registry - Only when flash card present at boot
  • From: Wang Yeqing
• Partition NTFS
  • From: stro
• Re: XScale sleep mode
  • From: Voidcoder
• Re: Some questions about the PC Card driver on WinCE5.0
  • From: bird
• Re: how to set register to tell device.exe to load my driver?
  • From: Steve Maillet \(eMVP\)
• Re: how to set register to tell device.exe to load my driver?
  • From: xuhaoz
• BSP wizard in PB 5.0
  • From: skindiver
• can't access the memoy region at 0xc2000000
  • From: ¾Èµ¿¿Á
• Re: USB Client storage ( David Liao come in)
  • From: Steve Maillet \(eMVP\)
• System Hangs with Hive Registry - Only when flash card present at boot
  • From: sean
• RE: USB Client storage ( David Liao come in)
  • From: Charles Wang
• USB Client storage ( David Liao come in)
  • From: Charles Wang
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Bruce Eitman \(eMVP\)
• SMSC 91C111 miniport problem
  • From: Lrz
• Re: Platform Builder 5 cant see BOOTME requests
  • From: A.User
• Re: why my stream driver function XXX_Open is called right after X
  • From: Charles Peterson
• Re: How to freeze the screen so the display driver does not refresh the screen?
  • From: Dave Heil \(exMVP\)
• Re: eboot and MSFlash
  • From: Paolo
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Martin
• Re: Altering Code for Suspend Button under WinCE 4.2 .NET
  • From: Steve Maillet \(eMVP\)
• Re: Altering Code for Suspend Button under WinCE 4.2 .NET
  • From: Paul G. Tobey [eMVP]
• Re: Microsoft .NET Compact Framework
  • From: Paul G. Tobey [eMVP]
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Bruce Eitman \(eMVP\)
• Re: Exporting platform features to an SDK
  • From: Dave Findlay
• Re: how to install a driver on the PDA?
  • From: Steve Maillet \(eMVP\)
• MFC Application in O/S Image
  • From: Jay Daniel
• Re: how to install a driver on the PDA?
  • From: Dave Heil \(exMVP\)
• Re: USB Mass Storage not recognized if already inserted at Startup
  • From: Martin
• Re: How to add a catalog into OS designview through .bat file?
  • From: Steve Maillet \(eMVP\)
• Re: gpio0 interrupt problem
  • From: Steve Maillet \(eMVP\)
• Re: Exporting platform features to an SDK
  • From: Bruce Eitman \(eMVP\)
• gpio0 interrupt problem
  • From: Rona
• Re: How to add a catalog into OS designview through .bat file?
  • From: Charles Wang
• Re: Exporting platform features to an SDK
  • From: Steve Maillet \(eMVP\)
• Re: Exporting platform features to an SDK
  • From: Dave Findlay
• RE: USB Mass Storage not recognized if already inserted at Startup
  • From: Martin
• Re: Exporting platform features to an SDK
  • From: Dave Findlay
• Re: Exporting platform features to an SDK
  • From: Bruce Eitman \(eMVP\)
• Re: why my stream driver function XXX_Open is called right after X
  • From: Dean Ramsier
• Re: Windows ce 4.2 Hive problem
  • From: Raceala Andrei
• Re: Platform Builder 5 cant see BOOTME requests
  • From: Steve Maillet \(eMVP\)
• Exporting platform features to an SDK
  • From: Dave Findlay
• Re: Windows ce 4.2 Hive problem
  • From: Wang Yeqing
• Platform Builder 5 cant see BOOTME requests
  • From: Midge
• Re: Altering Code for Suspend Button under WinCE 4.2 .NET
  • From: Anthony Pellerin
• Re: Flash File System problems/questions
  • From: Anthony Pellerin
• Re: Stream I/O driver XXX_Close race condition?
  • From: Steve Maillet \(eMVP\)
• Re: eboot and MSFlash
  • From: Anthony Pellerin
• Re: Stream I/O driver XXX_Close race condition?
  • From: Steve Maillet \(eMVP\)
• Flash File System problems/questions
  • From: superfluent
• Re: how to set register to tell device.exe to load my driver?
  • From: Steve Maillet \(eMVP\)
• ActiveSync Timeout by USB?
  • From: Yu
• Re: eboot and MSFlash
  • From: Paolo
• Re: Altering Code for Suspend Button under WinCE 4.2 .NET
  • From: CKuner
• Video capturing application
  • From: rimon
• Re: how to set register to tell device.exe to load my driver?
  • From: xuhaoz
• Re: how to set register to tell device.exe to load my driver?
  • From: xuhaoz
• Re: how to set register to tell device.exe to load my driver?
  • From: xuhaoz
• Re: How to configure the PPTP VPN server in WinCE 4.2 device?
  • From: Martin Meuli
• Re: Microsoft .NET Compact Framework
  • From: <ctacke/>
• Re: Catalog issue
  • From: ms
• Windows ce 4.2 Hive problem
  • From: Raceala Andrei
• Re: Microsoft .NET Compact Framework
  • From: Tweeeek
• Re: How to hide "windows" folder in root directory?
  • From: Wang Yeqing
• Windows CE image on Hard Disk
  • From: Stefano Magni
• Re: XScale sleep mode
  • From: AJM42
• Re: Altering Code for Suspend Button under WinCE 4.2 .NET
  • From: Anthony Pellerin
• Re: Altering Code for Suspend Button under WinCE 4.2 .NET
  • From: Anthony Pellerin
• Re: eboot and MSFlash
  • From: Anthony Pellerin
• Re: how to set register to tell device.exe to load my driver?
  • From: Anthony Pellerin
• How to hide "windows" folder in root directory?
  • From: Wang Yeqing
• Re: How to freeze the screen so the display driver does not refresh the screen?
  • From: Daniel Mattsson
• Re: Stream I/O driver XXX_Close race condition?
  • From: Mark Moeller
• Re: how to set register to tell device.exe to load my driver?
  • From: vijayaraju . k
• Re: Perfomance monitoring
  • From: turnsek
• Re: How to hide "windows" folder in root directory?
  • From: Voidcoder
• Re: Stream I/O driver XXX_Close race condition?
  • From: Joseph Garibaldi
• Re: XScale sleep mode
  • From: Voidcoder
• how to set register to tell device.exe to load my driver?
  • From: xuhaoz
• How to configure the PPTP VPN server in WinCE 4.2 device?
  • From: Yuanlei Sun
• Re: why my stream driver function XXX_Open is called right after X
  • From: ymir
• Re: Is DirectShow video rendering relative to DirectDraw ?
  • From: Yu
• Re: How to add a catalog into OS designview through .bat file?
  • From: Wang Yeqing
• Re: how to install a driver on the PDA?
  • From: xuhaoz
• Re: how to install a driver on the PDA?
  • From: xuhaoz
• Re: Recursive reboot during load
  • From: remco
• Re: How to freeze the screen so the display driver does not refresh the screen?
  • From: Daniel Mattsson
• Re: Product Key
  • From: RT
• Re: CE 5.0 and Visual Studio 2005
  • From: Tom
• Re: PB5 Issue
  • From: Doug Cook [MSFT]
• Re: How to add a catalog into OS designview through .bat file?
  • From: adam karbasi
• RE: sysgen error
  • From: adam karbasi
• RE: Catalog issue
  • From: Christopher Le [MS]
• Booting image with VIA chipset
  • From: Dale
• Re: eboot and MSFlash
  • From: Paolo
• Re: Hive-based register in wince420
  • From: "Susan Loh [MS]"
• Re: PB5 Issue
  • From: Steve Maillet \(eMVP\)
• Re: Perfomance monitoring
  • From: "Susan Loh [MS]"
• Re: Perfomance monitoring
  • From: "Susan Loh [MS]"
• Re: FILESYS exception with hive registry in 4.2
  • From: Susan Loh [MS]
• Re: CE 5.0 and Visual Studio 2005
  • From: Chris Tacke, eMVP
• Re: FILESYS exception with hive registry in 4.2
  • From: Joseph Garibaldi
• Re: PB5 Issue
  • From: Steve-o
• CE 5.0 and Visual Studio 2005
  • From: Dave Findlay
• Re: why my stream driver function XXX_Open is called right after X
  • From: Charles Peterson
• Re: why my stream driver function XXX_Open is called right after X
  • From: Charles Peterson
• Re: Product Key
  • From: Chris Tacke, eMVP
• Re: How to freeze the screen so the display driver does not refresh the screen?
  • From: Dave Heil \(exMVP\)
• Re: how to install a driver on the PDA?
  • From: Dave Heil \(exMVP\)
• Re: FILESYS exception with hive registry in 4.2
  • From: Susan Loh [MS]
• Re: Product Key
  • From: Dave Heil \(exMVP\)
• Re: Stream I/O driver XXX_Close race condition?
  • From: Charles Peterson
• Re: HKLM\Init and MFC Application (further clarification)
  • From: Jay Daniel
• Re: HKLM\Init and MFC Application (further clarification)
  • From: Jay Daniel
• Re: Choosing a MAC+PHY Ethernet controller
  • From: MichelB
• Re: PB5 Issue
  • From: Steve Maillet \(eMVP\)
• Re: why OS don't load LMemDebug.DLL
  • From: Susan Loh [MS]
• Re: Hive registry flushes automatically
  • From: Susan Loh [MS]
• Re: HKLM\Init and MFC Application (further clarification)
  • From: Susan Loh [MS]
• Urgent:Gateway Hive not working
  • From: Hans
• Re: XScale sleep mode
  • From: Steve Maillet \(eMVP\)
• Re: PB5 Issue
  • From: valrub
• Re: Recursive reboot during load
  • From: Dale
• Re: XScale sleep mode
  • From: AJM42
• Re: Choosing a MAC+PHY Ethernet controller
  • From: Chris Tacke, eMVP
• Re: Microsoft .NET Compact Framework
  • From: Tweeeek
• Choosing a MAC+PHY Ethernet controller
  • From: MichelB
• Re: Stream I/O driver XXX_Close race condition?
  • From: Steve Maillet \(eMVP\)
• Re: Steam interface that supports multiple instances of device
  • From: Steve Maillet \(eMVP\)
• Re: Steam interface that supports multiple instances of device
  • From: Dean Ramsier
• Re: XScale sleep mode
  • From: AJM42
• Steam interface that supports multiple instances of device
  • From: Vidya Udupa
• Re: eboot and MSFlash
  • From: ken
• Re: why my stream driver function XXX_Open is called right after X
  • From: ymir
• Re: Hive registry flushes automatically
  • From: Dean Ramsier
• Re: Is DirectShow video rendering relative to DirectDraw ?
  • From: Dean Ramsier
• Re: Stream I/O driver XXX_Close race condition?
  • From: Dean Ramsier
• Re: COM Ports detection Problems in WinCE.NET 4.2
  • From: Dean Ramsier
• Re: why my stream driver function XXX_Open is called right after XXX_I
  • From: Jean-Jacques Hiblot
• Re: why my stream driver function XXX_Open is called right after XXX_I
  • From: Dean Ramsier
• Re: XScale sleep mode
  • From: AJM42
• why my stream driver function XXX_Open is called right after XXX_I
  • From: ymir
• Re: Stream I/O driver XXX_Close race condition?
  • From: Bruce Eitman \(eMVP\)
• Re: XScale sleep mode
  • From: Voidcoder
• XScale sleep mode
  • From: AJM42
• Re: XScale sleep mode
  • From: Voidcoder
• Re: XScale sleep mode
  • From: Voidcoder
• COM Ports detection Problems in WinCE.NET 4.2
  • From: Veerasivakumar
• USB Mass Storage not recognized if already inserted at Startup
  • From: Martin
• Product Key
  • From: RT
• Re: Is DirectShow video rendering relative to DirectDraw ?
  • From: Yu
• sysgen error
  • From: Ozb
• Re: WinCE5.0 PCCARD Driver Suspend/Resume Problems
  • From: Martin Malik
• Re: XScale sleep mode
  • From: Voidcoder
• Stream I/O driver XXX_Close race condition?
  • From: Mark Moeller
• how to install a driver on the PDA?
  • From: xuhaoz
• Catalog issue
  • From: Voidcoder
• Re: Debugging through UART0
  • From: Voidcoder
• Re: Recursive reboot during load
  • From: remco
• RE: Export Emulator SDK not include headers and libs!
  • From: Christopher Le [MS]
• WLAN Adaptors and Drivers
  • From: C.A.
• WLAN Adaptors and Drivers
  • From: C.A.
• Re: PB5 Issue
  • From: Steve Maillet \(eMVP\)
• Re: Failed test GDI case on Magneto
  • From: Leslie Trowbridge [MS]
• RE: PB5 Issue
  • From: adam karbasi
• Re: PB5.0 SDK export problem
  • From: Christopher Le [MS]