How to use the Eboot.bin?
Dear All:
Hollow! I am a learner for WINCE5, I want to develop a new BSP for my
SDB(my development board is based on Intel XSCale PXA255), but when I
modified the MAINSTONEII BSP and built, the PB didn't generate the EBOOT.nb0
but only the EBOOT.bin. I checked the eboot.bib file and there is no error
in it. So I want to ask some questions:
1. Why the WINCE5 can not generate the EBOOT.nb0 file?
2. Can I use other methods to convert the EBOOT.bin to EBOOT.nb0?
3. If I want to use the eboot.bin to boot my SDB and download the NK.bin,
how can I burn it to the FLASH?
Thanks very much!!
.
Relevant Pages
- How to use eboot.bin ?
... SDB(my development board is based on Intel XSCale PXA255), ... modified the MAINSTONEII BSP and built, the PB didn't generate the EBOOT.nb0 ... Why the WINCE5 can not generate the EBOOT.nb0 file? ...
(microsoft.public.windowsce.embedded) - Re: Concept fussing~
... You can think of SDB (Standard Development Board) as the term used to refer ... A BSP is the software that Windows CE provides so you can download a Windows ... You need a particular BSP depending on what development platform you have. ... if you are using an Aspen SDB to develop a Windows CE-based ...
(microsoft.public.windowsce.platbuilder) - Re: Accessing Device Drivers from C#
... > - Development Board based on an IMX processor from Freescale ... > - BSP from Freescale. ... what is the more efficient way to access Drivers and BSP ...
(microsoft.public.windowsce.platbuilder) - Re: How to reconfigure image without BSPs?
... If you don't have the BSP, you can't reasonably hange anything on the ... > All you can do is write applications, or new drivers. ... > or get a new development board. ...
(microsoft.public.windowsce.platbuilder) |
|
