Re: Display problem



Jackson~ escreveu:
> Dear Antonio
>
> The problem is I am new to WinCE. That's why I asked how and where
> to fix this problem. To modify Config.bib?? or registry of CLE266?
>
> Best Regards
> Jackson
>
> "Antonio Carlos" wrote:
>
> >
> >
> > Jackson~ escreveu:
> > > Dear Sam
> > > I've encountered the same problem as you. Could you please kindly
> > > let me know how you fix this problem? Thank you a lots
> > >
> > > BR
> > > Jackson
> > >
> > > "Sam" wrote:
> > >
> > > > hai
> > > > ofcourse,it is copied to RAM and runs from there.
> > > > I have solved the problem
> > > > anyway, Thanks for suggestions
> > > >
> > > >
> > > > "voidcoder" wrote:
> > > >
> > > > > Do You really run the OS image from flash? or it is copied first
> > > > > to RAM and runs from RAM? In first case performance will be
> > > > > extremally slow since flash itself is very slow device (vs. SDRAM).
> > > > > There is nothing to do about except of tuning memory controller
> > > > > setting in order to reach the best performance.
> > > > >
> > > > >
> > > > > "Sam" <Sam@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > > > > news:84475B8A-2DF5-44BC-82BE-3D1DF6ED5720@xxxxxxxxxxxxxxxx
> > > > > > Hai
> > > > > >
> > > > > > I am using platform bulder 5.0. I have made an mage for x86
> > > > > platfoem(Chipset
> > > > > > is Via CLE266 ).
> > > > > > If i booth the image from local flash,it takes around 2 minutes to gwt the
> > > > > > display (After loader infoemation). But if i download from thru ethernet
> > > > > it
> > > > > > works fine.
> > > > > > Can any body suggest me where should i touch for debugging?
> > > > > >
> > > > > > Thanks in advance
> > > > > >
> > > > >
> > > > >
> >
> >
> >
> >
> >
> >
> > Try uncheck ALL options in menu -> Platform -> Settings -> Build
> > Options
> > > > >
> >





Dear Jackson

I had the same problem working with a VIA Board. I just unchecked all
options in menu Platform -> Settings -> Build Options tab , did a clean
build and it worked fine. It seems that some of those options (enabled
by default) makes the boot lasts that time


> >

.

Relevant Pages