Re: DEBUGMSG and FFUART enabled at the same time
- From: "Steve Maillet \(eMVP\)" <nospam1@xxxxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 30 May 2005 11:40:53 -0400
Which serial drivers are loaded is entirely controlled by the registry.
Which port is used for DEBUG is controlled by the OAL implementation.
Loading the driver for the port that is ALSO being used as the debug port
will result in undefined behavior. So figure out what your BSP is using and
don't load that driver unless you are not using it in the OAL.
--
Steve Maillet
EmbeddedFusion
www.EmbeddedFusion.com
smaillet at EmbeddedFusion dot com
.
- References:
- DEBUGMSG and FFUART enabled at the same time
- From: Bolla
- Re: DEBUGMSG and FFUART enabled at the same time
- From: Steve Maillet \(eMVP\)
- Re: DEBUGMSG and FFUART enabled at the same time
- From: Bolla
- DEBUGMSG and FFUART enabled at the same time
- Prev by Date: Re: Audio problem in VOIP application
- Next by Date: Load Fonts From USB Storage Device
- Previous by thread: Re: DEBUGMSG and FFUART enabled at the same time
- Next by thread: Change CPU frequency from WinCE (not bootloader)
- Index(es):
Relevant Pages
|
|
