Re: Display problem
- From: "Antonio Carlos" <antonio.gutierrez@xxxxxxxxxxxxxxxxxxxx>
- Date: 30 May 2005 06:23:27 -0700
Jackson~ escreveu:
> Dear Sam
> I've encountered the same problem as you. Could you please kindly
> let me know how you fix this problem? Thank you a lots
>
> BR
> Jackson
>
> "Sam" wrote:
>
> > hai
> > ofcourse,it is copied to RAM and runs from there.
> > I have solved the problem
> > anyway, Thanks for suggestions
> >
> >
> > "voidcoder" wrote:
> >
> > > Do You really run the OS image from flash? or it is copied first
> > > to RAM and runs from RAM? In first case performance will be
> > > extremally slow since flash itself is very slow device (vs. SDRAM).
> > > There is nothing to do about except of tuning memory controller
> > > setting in order to reach the best performance.
> > >
> > >
> > > "Sam" <Sam@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > > news:84475B8A-2DF5-44BC-82BE-3D1DF6ED5720@xxxxxxxxxxxxxxxx
> > > > Hai
> > > >
> > > > I am using platform bulder 5.0. I have made an mage for x86
> > > platfoem(Chipset
> > > > is Via CLE266 ).
> > > > If i booth the image from local flash,it takes around 2 minutes to gwt the
> > > > display (After loader infoemation). But if i download from thru ethernet
> > > it
> > > > works fine.
> > > > Can any body suggest me where should i touch for debugging?
> > > >
> > > > Thanks in advance
> > > >
> > >
> > >
Try uncheck ALL options in menu -> Platform -> Settings -> Build
Options
> > >
.
- Follow-Ups:
- Re: Display problem
- From: Jackson~
- Re: Display problem
- References:
- Re: Display problem
- From: Jackson~
- Re: Display problem
- Prev by Date: Re: Migrating Windows CE.NET 4.2 to CE 5.0 on OMAP1510 platform
- Next by Date: Re: Activity timers
- Previous by thread: Re: Display problem
- Next by thread: Re: Display problem
- Index(es):
Relevant Pages
|
|
