Re: SMC9000.LIB -----> EBOOT

Hi HCL,

so far i understand you, everthing seems to be fine.
EBOOT shows 'Sent BOOTME to 255.255.255.255' and PB displays the target name
in device name box, so what's going wrong??

Best regards,
Oliver Münchow

"hcl" <hclvisi@xxxxxxxxxxx> schrieb im Newsbeitrag
news:%2372sJjOZFHA.2688@xxxxxxxxxxxxxxxxxxxxxxx
>I am developing EBOOT using smc9000.lib in common\driver\ethdbg\smc9000 for
> lan91c96.
> When EBOOT runs, in PB there is target name in device name box. But EBOOT
> sends
> Sent BOOTME to 255.255.255.255
> Sent BOOTME to 255.255.255.255
>
> If smc9000.lib is avaible and anybody successfully applies it?
>
>
>
>


.

Relevant Pages

  • Re: SMC9000.LIB -----> EBOOT
    ... > so far i understand you, everthing seems to be fine. ... > EBOOT shows 'Sent BOOTME to 255.255.255.255' and PB displays the target ... >> When EBOOT runs, in PB there is target name in device name box. ...
    (microsoft.public.windowsce.platbuilder)
  • SMC9000.LIB -----> EBOOT
    ... When EBOOT runs, in PB there is target name in device name box. ... Sent BOOTME to 255.255.255.255 ...
    (microsoft.public.windowsce.platbuilder)
  • ethernet download of image
    ... I'm trying to download my CE image to my target. ... I selected ethernet as download and transport protocol in the target ... Sent BOOTME to 255.255.255.255 ...
    (microsoft.public.windowsce.platbuilder)
  • booting windows CE 6.0 using eboot
    ... I've created boot floppy using setupdisk.144 available in the ... in the target PC. ... there is no target device name. ... It is not responding to BOOTME request from target. ...
    (microsoft.public.windowsce.platbuilder)
  • Need help in completing the CEPC Tutorial
    ... Connected development PC and target PC to a linksys 4-port switch, ... On development PC, platform builder, Target->Attach Device ... Sent BOOTME to 255.255.255.255 ...
    (microsoft.public.windowsce.platbuilder)