CE debugging very slow with HyperThread host

I have a host pc that I am using for my PB development. (5.0)
I find that if I enable HT in the BIOS, my debug process is very slow. If I
disable HT in the BIOS, it seems to be normal speed.

Is this expected? I would prefer to leave the HT on as it helps to enhance
my overall development experiece.

Thanks,
Chuck
.

Relevant Pages

  • Re: School setup - very limited user accounts.
    ... You could configure the BIOS to not allow booting from CD, floppy, USB, or other non-hard drive devices but some kids can Google, too, and find out how to reset the BIOS if you haven't locked the cases. ... The idea is that the host would get reset everyday so in the morning the host was back in the known state. ...
    (microsoft.public.windowsxp.general)
  • Re: Platten per Relais einschalten?
    ... Dieses Setting macht also nur Sinn, ... Wenn die Platte nicht auf "wait on ID" gestellt ist, ... daß dein Host im Silent-Mode läuft. ... Startup-Vorgang des BIOS. ...
    (de.sci.electronics)
  • Re: What Bob Spitz Left Out of His Biography
    ... > he doesn't report this - as no other bios I know of do either. ... and then later in Taylor's book "A Secret History," which was later ... published in paperback as "With the Beatles" which is still in print. ... Prev by Date: ...
    (rec.music.beatles)
  • ACPI routing tables in BIOS and XP
    ... have a new design which we're developing the bios for using a bios ... scratch everything works just fine (XP install loads the Standard PC ... But right now the debug process is very ... reload the ACPI table data and reconfigure itself without doing a full ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: ACPI routing tables in BIOS and XP
    ... have a new design which we're developing the bios for using a bios ... scratch everything works just fine (XP install loads the Standard PC ... But right now the debug process is very ...
    (microsoft.public.windowsxp.help_and_support)