Re: more details

hi sean,

well, that does help me..thank you..am kind of relieved that it is what
is the case with u as well...Is it the same way in 4.2? 'coz when i tried
out, i remember giving \\box directly without using the remoteadmn to
configure the name/adapter list and getting a login box at the host machine.
Obviously, i cannot login 'coz i don't have the password...and for that i
will have to go through remoteadmn ...

but in 5.0, i don't get any login box unless i go through remoteadmn
and set the passwd & select the Adapter.

and have you observed by any chance anything like what i have mentioned
in my previous mail? (w.r.t connection getting lost and the shared folder
not responding). I have that problem with both 4.2 and 5.0.


--
cheers,

Joseph Garibaldi.
B'lore, India.
"wrx03ppp" <yourdisplayname@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C3AEB254-159F-43ED-89C6-C2342D421FBE@xxxxxxxxxxxxxxxx
> Hi Joseph
>
> Sorry 'bout that, I was responding to your 2nd post and had somehow missed
> your 1st post - that would have explained about your mac1.
>
> And yes, I follow your steps 1, 2 and 3 to enable file sharing on my
system.
> The registry is persisted, so I do this only once. I do not need step 4 as
my
> adapter already seems to be selected.
>
> My registry has the following:
>
> [HKEY_LOCAL_MACHINE\Services\Smbserver]
> "AdapterList"="*"
>
> Maybe this will help?
>
> Sean
>
> Which
> "Joseph Garibaldi" wrote:
>
> > hi sean,
> >
> > mac1 is one of the 2 available Miniport Adapters in the system.
What i
> > meant was i expected one of those two macs (mac1 'coz i selected that
for
> > the SMBServer using [HKEY_LOCAL_MACHINE\Services\Smbserver] (refer to my
> > first post) to be preselected, which isn't happening.
> >
> > let me get this straight. Do you mean to say you also have to follow
the
> > following steps to enable sharing in 5.0?
> >
> > 1. access remoteadmn/deviceconfig.htm.
> > 2. Set password for access.
> > 3. Modify and apply the device name.
> > 4. select the Miniport Adapter to be available for file sharing.
> >
> > Also there seems to be some timeout happening sometime after which
the
> > target device does respond, but it does not let the host machine to
access
> > any shared file. What i have on the host machine side is a FOLDER "Not
> > Responding" kind of a situation. But on the target machine, everything
else
> > is fine, but i cannot even access remoteadmn page through both target
and
> > host. The following is the debug message i am getting during this
> > behaviour. This is happening to me in 4.2 as well. Anybody has any
inputs
> > for that?
> >
> > Now, somewhere in the middle of that debug output, it stops
responding
> > positively...not at the beginning itself.
> > --
> > cheers,
> >
> > Joseph Garibaldi.
> > B'lore, India.
> >
> > ==
> >
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:NegAcquireCredentialsHandle: Get a Negotiate CredHandle:\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > SPNEGO: Added 00056CC0:00000004, NTLM\par
> > SPNEGO:NegAcquireCredentialsHandle: returned 0x0\par
> >
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 56d00, 0 )\par
> > SPNEGO:buf 0E32F0B9\par
> > SPNEGO:bufsize 56\par
> > SPNEGO:Token size (post der) 6\par
> > SPNEGO:buf 0E32F0BC\par
> > SPNEGO:bufsize 53\par
> > SPNEGO:header 1\par
> > SPNEGO:OidLength 8\par
> > SPNEGO:OidPtr 0E32F0BA\par
> > SPNEGO:Incoming Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Comparing to Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Common Package is NTLM\par
> > SPNEGO:Adding mech list for 00059CE0\par
> > SPNEGO:Desired Package match with token!\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 90312\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 56d00, 59ce0 )\par
> > SPNEGO:Failed to decode data: -1011\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 0\par
> > SPNEGO:Freeing mech list for 00059CE0\par
> > SPNEGO:Releasing credentials 00056D00\par
> > SPNEGO:Deleting context 59ce0\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > KER: SMB_OpenX -- cant open because the file is a directory!!
> > \\profiles\\default\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:NegAcquireCredentialsHandle: Get a Negotiate CredHandle:\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > SPNEGO: Added 00056CC0:00000004, NTLM\par
> > SPNEGO:NegAcquireCredentialsHandle: returned 0x0\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 56d00, 0 )\par
> > SPNEGO:buf 0E2FF0B9\par
> > SPNEGO:bufsize 56\par
> > SPNEGO:Token size (post der) 6\par
> > SPNEGO:buf 0E2FF0BC\par
> > SPNEGO:bufsize 53\par
> > SPNEGO:header 1\par
> > SPNEGO:OidLength 8\par
> > SPNEGO:OidPtr 0E2FF0BA\par
> > SPNEGO:Incoming Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Comparing to Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Common Package is NTLM\par
> > SPNEGO:Adding mech list for 00059CE0\par
> > SPNEGO:Desired Package match with token!\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 90312\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 56d00, 59ce0 )\par
> > SPNEGO:Failed to decode data: -1011\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 0\par
> > SPNEGO:Freeing mech list for 00059CE0\par
> > SPNEGO:Releasing credentials 00056D00\par
> > SPNEGO:Deleting context 59ce0\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:NegAcquireCredentialsHandle: Get a Negotiate CredHandle:\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > SPNEGO: Added 00057010:00000004, NTLM\par
> > SPNEGO:NegAcquireCredentialsHandle: returned 0x0\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 57050, 0 )\par
> > SPNEGO:buf 0E31F0B9\par
> > SPNEGO:bufsize 56\par
> > SPNEGO:Token size (post der) 6\par
> > SPNEGO:buf 0E31F0BC\par
> > SPNEGO:bufsize 53\par
> > SPNEGO:header 1\par
> > SPNEGO:OidLength 8\par
> > SPNEGO:OidPtr 0E31F0BA\par
> > SPNEGO:Incoming Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Comparing to Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Common Package is NTLM\par
> > SPNEGO:Adding mech list for 000568D0\par
> > SPNEGO:Desired Package match with token!\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 90312\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 57050, 568d0 )\par
> > SPNEGO:Failed to decode data: -1011\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 0\par
> > SPNEGO:Freeing mech list for 000568D0\par
> > SPNEGO:Releasing credentials 00057050\par
> > SPNEGO:Deleting context 568d0\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:NegAcquireCredentialsHandle: Get a Negotiate CredHandle:\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > SPNEGO: Added 00057010:00000004, NTLM\par
> > SPNEGO:NegAcquireCredentialsHandle: returned 0x0\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 57050, 0 )\par
> > SPNEGO:buf 0E31F0B9\par
> >
> > SPNEGO:bufsize 56\par
> > SPNEGO:Token size (post der) 6\par
> > SPNEGO:buf 0E31F0BC\par
> > SPNEGO:bufsize 53\par
> > SPNEGO:header 1\par
> > SPNEGO:OidLength 8\par
> > SPNEGO:OidPtr 0E31F0BA\par
> > SPNEGO:Incoming Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Comparing to Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Common Package is NTLM\par
> > SPNEGO:Adding mech list for 00059CE0\par
> > SPNEGO:Desired Package match with token!\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 90312\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 57050, 59ce0 )\par
> > SPNEGO:Failed to decode data: -1011\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 0\par
> > SPNEGO:Freeing mech list for 00059CE0\par
> >
> > SPNEGO:Releasing credentials 00057050\par
> > SPNEGO:Deleting context 59ce0\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:NegAcquireCredentialsHandle: Get a Negotiate CredHandle:\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > SPNEGO: Added 00057AD0:00000004, NTLM\par
> > SPNEGO:NegAcquireCredentialsHandle: returned 0x0\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 57b60, 0 )\par
> > SPNEGO:buf 0E2FF0B9\par
> > SPNEGO:bufsize 56\par
> > SPNEGO:Token size (post der) 6\par
> > SPNEGO:buf 0E2FF0BC\par
> > SPNEGO:bufsize 53\par
> > SPNEGO:header 1\par
> > SPNEGO:OidLength 8\par
> > SPNEGO:OidPtr 0E2FF0BA\par
> > SPNEGO:Incoming Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Comparing to Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Common Package is NTLM\par
> > SPNEGO:Adding mech list for 00059CE0\par
> > SPNEGO:Desired Package match with token!\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 90312\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 57b60, 59ce0 )\par
> > SPNEGO:Failed to decode data: -1011\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 0\par
> > SPNEGO:Freeing mech list for 00059CE0\par
> > SPNEGO:Releasing credentials 00057B60\par
> > SPNEGO:Deleting context 59ce0\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > Invalid handle: Set=7 Method=8\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:NegAcquireCredentialsHandle: Get a Negotiate CredHandle:\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > SPNEGO: Added 00051F10:00000004, NTLM\par
> > SPNEGO:NegAcquireCredentialsHandle: returned 0x0\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 51f50, 0 )\par
> > SPNEGO:buf 0E32F0B9\par
> > SPNEGO:bufsize 56\par
> > SPNEGO:Token size (post der) 6\par
> > SPNEGO:buf 0E32F0BC\par
> > SPNEGO:bufsize 53\par
> > SPNEGO:header 1\par
> > SPNEGO:OidLength 8\par
> > SPNEGO:OidPtr 0E32F0BA\par
> > SPNEGO:Incoming Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Comparing to Mechanism: 1.3.6.1.4.1.311.2.2.10.\par
> > SPNEGO:Common Package is NTLM\par
> > SPNEGO:Adding mech list for 00059CE0\par
> > SPNEGO:Desired Package match with token!\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 90312\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:AcceptLsaModeContext( 51f50, 59ce0 )\par
> > SPNEGO:Failed to decode data: -1011\par
> > SPNEGO:WLsaAcceptContext( NTLM ) returned 0\par
> > SPNEGO:Freeing mech list for 00059CE0\par
> > SPNEGO:Releasing credentials 00051F50\par
> > SPNEGO:Deleting context 59ce0\par
> > Toolbar: SetCapture\par
> > ERROR:
> >
c:\\macallan\\private\\winceos\\coreos\\gwe\\msgque\\foregnd\\foregnd.cpp
> > line 1229: \par
> > MQ_SAWI(th:c730ff8a) hwndNewActive is not in this UI context.\par
> > Grow Gdi handle table from 768 to 832\par
> > Unknown: DEBUGCHK failed in file
> > c:\\macallan\\private\\servers\\smbprint\\protocol\\cracker.cpp at line
> > DEBUG_BREAK @0216e2d0 Ignored.\par
> > Unknown: DEBUGCHK failed in file
> > c:\\macallan\\private\\servers\\smbprint\\protocol\\cracker.cpp at line
> > DEBUG_BREAK @0216e328 Ignored.\par
> > SWP:FrameChanged sent to window 0x7C017BB0 which is not visible\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > -- reading SMB TCP failed!! closing connection\par
> > SECUR32: Locating package 'Negotiate' ...\par
> > found (0x0004D3E0).\par
> > SPNEGO:NegAcquireCredentialsHandle: Get a Negotiate CredHandle:\par
> > SECUR32: Locating package 'NTLM' ...\par
> > found (0x0004D3C0).\par
> > SPNEGO: Added 0005AF20:00000004, NTLM\par
> > SPNEGO:NegAcquireCredentialsHandle: returned 0x0\par
> >
> > SPNEGO:AcceptLsaModeContext( 5af60, 0 )\par


.

Loading