Re: How to get debug messages from one module not all?

One way is to run a retail image, but put the debug version of the file that
you want output from in the _FLATRELEASEDIR before running makeimg or
starting from the release folder.

--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net

Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member


"Daniel Mattsson" <danmat378852@xxxxxxxxxxxx> wrote in message
news:%23ifLMY1SFHA.140@xxxxxxxxxxxxxxxxxxxxxxx
> When I debug the image all the modules debug info is written so it takes a
> long time if i only want to debug one module.
>
> If I want debug messages from the gwexp module and not all the others,
what
> to do?
>
> Thanks, Dani
>
>


.

Relevant Pages

  • Re: How to get debug messages from one module not all?
    ... Cheers, Dani ... > One way is to run a retail image, but put the debug version of the file ... > beitman AT applieddata DOT net ... >> When I debug the image all the modules debug info is written so it takes ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Stream Device Driver How-to
    ... A debug build of the device manager would be handy. ... beitman AT applieddata DOT net ... An ISO 9001:2000 Registered Company ... What do you mean by subproject? ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Stream Device Driver How-to
    ... A debug build of the device manager would be handy. ... beitman AT applieddata DOT net ... Applied Data Systems ... An ISO 9001:2000 Registered Company ...
    (microsoft.public.windowsce.platbuilder)
  • RE: Is there anybody to bulid a retail image to enable to use bt devic
    ... You are running btloader correctly. ... configured correctly on the retail image. ... Remember what I said about this before, it is possible that on a debug ... It will also hard link the driver into btd.dll. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Unable to use Target - Run Programs to execute files
    ... beitman AT applieddata DOT net ... Applied Data Systems ... I would like to use the Target - Run Programs option to test and Debug ...
    (microsoft.public.windowsce.platbuilder)