Re: Hive-based registry setting

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi Luca,

I hope you will there to answer at this question:
Why I have all referement wrote in the help "Using Hive-based registry" in
common.reg and not in platform.reg ? Did you have too or not ?

Please let me know !!

thank you tiziano fabbri

"tiziano fabbri" wrote:

> Hi Luca,
>
> thanks for the reply.
> Yes I did, and following this help "Using hive-based registry" I had some
> satisfactions: I made a RegFlush application to save registry setting. This
> is works. If I reboot my board all changing made on my desk, hide tool bar
> for example or view the hides files, come backs. Problem now that I lost
> Keyboard and possibility to make connection because... I don't know keyboard
> is dead, flashing on leds is visible at the boot but after this non run.
> Second are the connections: I can't make a new one because after chosing
> sequence when apply my modification nothing happen on the desk, all is loose.
> Also if I check in "PcConnection" utility looking on left I haven't the
> default connection 19200 but is write "empty".
> Now I'm going back to my step to understand what is happening.
>
> If you have some idea ??!!??
>
> thanks, tiziano fabbri
>
> "Luca Calligaris" wrote:
>
> > Hi Tiziano, it seems you want to enable the hive registry on
> > your HD: I supposed you have dragged from the catalog the following
> > items:
> > -ATAPI driver
> > -FATFS driver
> > -Hive based registry
> >
> > PB 5.0:
> > you must set the environment variables PRJ_ENABLE_FSREGHIVE and
> > PRJ_BOOTDEVICE_ATAPI. You can even set PRJ_ENABLE_REGFLUSH_THREAD
> > if you want filesys.exe to perform flushing of the registry automatically.
> >
> > PB 4.X:
> > since you're using a Geode platform set the environment variables
> > BSP_ENABLE_FSREGHIVE
> >
> > If "DefaultUser" is not set, a user by the name "default" is loaded
> >
> > "tiziano fabbri" wrote:
> >
> > >
> > >
> > > "Jimbo" wrote:
> > >
> > > > Whatever you do, do not modify common.reg.
> > > >
> > > >
> > > Hi Jimbo, thank you for your reply.
> > >
> > > I moved my modification to platform.reg but didn't change my situation.
> > > If you red my previous message, do you know why the help refer to
> > > platform.reg but I found alls Key referement in coomon.reg ? What I didn't
> > > understand ?
> > >
.

Relevant Pages

  • IRC Packets being generated. Dont know where from...
    ... *Registry value not found* ... Autorun entries from Registry: ... Enumerating ICQ Agent Autostart apps: ... RAS Asynchronous Media Driver: System32\DRIVERS\asyncmac.sys (manual ...
    (microsoft.public.security.virus)
  • hijack this startup - can someone tell me the hack i am experienci
    ... *Registry value not found* ... Enumerating ICQ Agent Autostart apps: ... Intel82801 Audio Driver Install Service: ... Application Management: %SystemRoot%\system32\svchost.exe -k netsvcs (manual ...
    (microsoft.public.windowsxp.security_admin)
  • Re: BSOD Error 0x000000B8
    ... *Registry value not found* ... Enumerating ICQ Agent Autostart apps: ... ADI UAA Function Driver for High Definition Audio Service: ... Application Management: %SystemRoot%\system32\svchost.exe -k netsvcs ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: hijack this startup - can someone tell me the hack i am experienci
    ... | *Registry key not found* ... | *Registry value not found* ... | Autorun entries from Registry: ... | Intel82801 Audio Driver Install Service: ...
    (microsoft.public.windowsxp.security_admin)
  • RE: Windows 2000 RRAS and ipSEC /L2TP VPN
    ... How to Configure a L2TP/IPSec Connection Using Pre-shared Key Authentication ... This article contains information about modifying the registry. ... , Windows 2000 is compliant with IKE RFC ...
    (microsoft.public.win2000.networking)