Re: Display problem

Do You really run the OS image from flash? or it is copied first
to RAM and runs from RAM? In first case performance will be
extremally slow since flash itself is very slow device (vs. SDRAM).
There is nothing to do about except of tuning memory controller
setting in order to reach the best performance.


"Sam" <Sam@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:84475B8A-2DF5-44BC-82BE-3D1DF6ED5720@xxxxxxxxxxxxxxxx
> Hai
>
> I am using platform bulder 5.0. I have made an mage for x86
platfoem(Chipset
> is Via CLE266 ).
> If i booth the image from local flash,it takes around 2 minutes to gwt the
> display (After loader infoemation). But if i download from thru ethernet
it
> works fine.
> Can any body suggest me where should i touch for debugging?
>
> Thanks in advance
>


.

Relevant Pages

  • Re: Display problem
    ... ofcourse,it is copied to RAM and runs from there. ... or it is copied first ... > extremally slow since flash itself is very slow device. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Performance and Flash Pipelining on TI 28F12 DSPs
    ... > of "critical code" we could move to RAM. ... > from internal flash? ... Since the external RAM is as big as the internal flash, ... the timers and all other interrupts are shut off, ...
    (comp.dsp)
  • Re: [ANNOUNCE] Ramback: faster than a speeding bullet
    ... The fact is, enterprise scale ramdisks are here now, while ... enterprise scale flash is not. ... does not approach the write performance of RAM, ... My goal is not to replace RAM with flash, but disk with flash. ...
    (Linux-Kernel)
  • XIP vs RAM
    ... Maybe the system can even get away with the next small size RAM ... Does anyone know if/what the premimum of the "K" Strata FLASH is? ... Also what are the steps needed to transition to a XIP OS? ... >>> My bootloader create a BINFS partition and an EXTENDED partition on ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Relocate from nor to ddr CE 5.0
    ... programmed into flash. ... but the image info says it belongs to ram. ... Your bootloader needs to have code that recognizes if the image is ... blt CODEINRAM ...
    (microsoft.public.windowsce.platbuilder)
Loading