Anyone have RNDIS over USB working on a MainstoneII?

From: Henrik (slaskhenrik_at_gmail.com)
Date: 02/25/05 

Date: 25 Feb 2005 06:02:25 -0800

I'm having problems getting RNDIS up and running on a MainstoneII
board. As far as I can tell I have the rndis drivers setup properly on
my host PC, since the host pc recognise the CE-device as a local area
connection (and the device presents itself as I specified in the RNDIS
registry settings). However, the device does not manage to obtain a IP
adress through DHCP, printing the debug ouput "GetDhcpLease(RNDISFN1):
failed badly!".

Since I'm a total newbie on RNDIS I don't relly know what the problem
might be. The BSP has been updated with the latest QFE, and I have kitl
ethernet running for download, debugging and for the device's network
access. Any suggestions on how to proceed?

Henrik

Relevant Pages

  • Re: Host RNDIS driver doesnt get the interrupt
    ... RNDIS is a closed protocol. ... My device faces the error condition in sending the interrupt when there ... I am concern about what will the host do when it didn't get the reply. ... NDIS can request reset if a packet is pending with the device for too ...
    (microsoft.public.development.device.drivers)
  • Re: Host RNDIS driver doesnt get the interrupt
    ... Pankaj Garg wrote: ... RNDIS is not a closed protocol. ... My device faces the error condition in sending the interrupt when there ... I am concern about what will the host do when it didn't get the reply. ...
    (microsoft.public.development.device.drivers)
  • Re: RNDIS: no IP address
    ... target USB device correctly and installs the RNDIS driver on the host side. ... How do you set up a static address for the RNDIS? ... RNDISFN:: UFN_DETACH received. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Host RNDIS driver doesnt get the interrupt
    ... RNDIS is not a closed protocol. ... My device faces the error condition in sending the interrupt when there ... I am concern about what will the host do when it didn't get the reply. ... NDIS can request reset if a packet is pending with the device for too ...
    (microsoft.public.development.device.drivers)
  • Re: UDC performance on PXA270
    ... and it's a host pc limitation i think, no matter i run my board at 200 or ... > with PXA USB client controller + windows xp sp2 ... > I'm not able to reach more than 250KB/s on RNDIS. ... > USB function drivers seem to be even slower. ...
    (microsoft.public.windowsce.platbuilder)