wince 5.0 xscale 27x flash image problem
From: mobilevil (mobilevil_at_mobile.com)
Date: 01/24/05
- Next message: milan: "Re: Equivalent of MFC"
- Previous message: gary: "Re: WinCE 5.0 automatic ram question?"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 24 Jan 2005 18:12:41 +0800
guess I'm still sleepy or drunk, i couldn't figure out what's happening
today.
no matter how i change the NK value in config.bib, eboot download still
think it is a RAM image.
I've checked the "write run time image to flash memory" in project setting,
and I changed the config.bib
maybe tomorrow morning after I wakeup, I'll know what's happening....
so do you guys see any problem here?
Src IP 10.150.10.9 Port 0400 Dest IP 10.150.10.4 Port 0AE2
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp
****** OEMVerifyMemory checking virtual range [ 0x80100000 ==>
0x80987993 ]...
****** OEMVerifyMemory checking physical range [ 0xA8100000 ==>
0xA8987993 ]...
****** RAM address ******
NK 9CA80000 03F80000 RAMIMAGE
RSVD 80000000 000FF000 RESERVED
ARGS 800FF000 00001000 RESERVED
RAM 80100000 03EFFC00 RAM
DRV_GBL 83FFFC00 00000400 RESERVED
ALIGN
g_oalAddressTable
DCD 0x80000000, 0xA8000000, 64 ; MAINSTONEII: SDRAM (64MB).
;DCD 0x80000000, 0xA0000000, 64 ; MAINSTONEII: SDRAM
(64MB).
DCD 0x84000000, 0x5C000000, 1 ; BULVERDE: Internal SRAM
(64KB bank 0).
DCD 0x84100000, 0x58000000, 1 ; BULVERDE: Internal memory
PM registers.
DCD 0x84200000, 0x4C000000, 1 ; BULVERDE: USB host
controller.
DCD 0x84300000, 0x48000000, 1 ; BULVERDE: Memory
controller.
DCD 0x84400000, 0x44000000, 1 ; BULVERDE: LCD controller.
DCD 0x84500000, 0x40000000, 32 ; BULVERDE: Memory-mapped
registers (peripherals).
DCD 0x86500000, 0x3C000000, 64 ; BULVERDE: PCMCIA S1 common
memory space.
DCD 0x8A500000, 0x38000000, 64 ; BULVERDE: PCMCIA S1
attribute memory space.
DCD 0x8E500000, 0x30000000, 32 ; BULVERDE: PCMCIA S1 I/O
space.
DCD 0x90500000, 0x2C000000, 64 ; BULVERDE: PCMCIA S0 common
memory space.
DCD 0x94500000, 0x28000000, 64 ; BULVERDE: PCMCIA S0
attribute memory space.
DCD 0x98500000, 0x20000000, 32 ; BULVERDE: PCMCIA S0 I/O
space.
DCD 0x9A500000, 0xE0000000, 1 ; MAINSTONEII: Zero-bank (in
reserved slot - no physical memory required).
DCD 0x9A600000, 0x14000000, 1 ; MAINSTONEII: nCS5:
eXpansion board header.
DCD 0x9A700000, 0x10000000, 1 ; MAINSTONEII: nCS4: SMSC
91C111 Ethernet controller.
DCD 0x9A800000, 0x0A000000, 1 ; MAINSTONEII: nCS2 (upper
half): 2MB SRAM.
DCD 0x9A900000, 0x08000000, 1 ; MAINSTONEII: nCS2 (lower
half): Board registers (FPGA).
DCD 0x9AA00000, 0x04000000, 32 ; MAINSTONEII: nCS1:
Secondary flash (32MB).
DCD 0x9CA00000, 0x00000000, 32 ; MAINSTONEII: nCS0: Boot
Flash (32MB).
DCD 0x9EA00000, 0x50000000, 1 ; BULVERDE: Camera
peripheral interface.
DCD 0x00000000, 0x00000000, 0 ; end of table
- Next message: milan: "Re: Equivalent of MFC"
- Previous message: gary: "Re: WinCE 5.0 automatic ram question?"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
|
