Re: How to convert linux ethernet driver to wince driver
From: Yannick Chamming's [eMVP] (ychammings_nospam_at_adeset.com)
Date: 01/21/05
- Next message: Yannick Chamming's [eMVP]: "Re: Accessing Memory from OAL"
- Previous message: Yannick Chamming's [eMVP]: "Re: I can't Remote Desktop into CE device!"
- In reply to: Wang Yeqing: "Re: How to convert linux ethernet driver to wince driver"
- Next in thread: Wang Yeqing: "Re: How to convert linux ethernet driver to wince driver"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 21 Jan 2005 08:36:55 +0100
I think only guys from D-Link could help you, or S/O who developped a driver
for the same card. For the last case, the only thing to do is to perform a
web search.
Good luck...
Yannick
-- ---------------------------------------------------------------- Yannick Chamming's (eMVP) ADESET Windows Embedded Manager ychammings AT adeset DOT com> http://www.adeset.com T閘 : +33 (0)4.72.18.57.77 Fax : +33 (0)4.72.18.57.78 ---------------------------------------------------------------- "Wang Yeqing" <wangyq@amoi.com.cn> wrote in message news:OcIbN2s$EHA.608@TK2MSFTNGP15.phx.gbl... > I am reading the linux source code now.But I have no knowledge of this card. > I don't know how to send command,receive data,and know little about how to > configure the registers. > > I think if I have the data *** of this card,the work will be a little > easier. > > But how can I get the data ***.I have access to www.d-link.com. > But I found only information about how to use this card.There is no > information about how to write driver for this card. > I think if I did not work for this convertion I will care little about how > to write driver for ethernet card,because manufacturer has done everything > for you. > > Unfortunately,I need to know how to write driver for this card.So I think I > must have the data *** of this card,Or I think I can not do this work > well. > > > Could some one give some help? > > Thanks in advance. > > > -- > Best wishes > Wang Yeqing > *********************************************************** > Intelligent Grouping Research and Development Institute > Amoi Electronics Co., Ltd > > Tel: 86-592-6516777-6516 > *********************************************************** > > "Yannick Chamming's [eMVP]" <ychammings_nospam@adeset.com> 写入消息新闻:uhOWjOs$EHA.2880@TK2MSFTNGP14.phx.gbl... > > WinCE Ethernet driver are NDIS driver, which is not the case of Linux > > ones, > > so it won't be easy to just "convert it" > > > > You should probably redevelop the driver from a WinCE sample, and > > potentially reinject low level portions of code from Linux driver for > > hardware accesses. > > Check your licensing, because I'm not sure you are allowed to include code > > from Linux into CE (especially with GPL licence). In this case, you'll > > have > > to perform reverse engineering on the Linux driver to recode it into CE. > > -- > > ---------------------------------------------------------------- > > Yannick Chamming's (eMVP) > > ADESET > > Windows Embedded Manager > > ychammings AT adeset DOT com> > > http://www.adeset.com > > T閘 : +33 (0)4.72.18.57.77 > > Fax : +33 (0)4.72.18.57.78 > > ---------------------------------------------------------------- > > > > "Wang Yeqing" <wangyq@amoi.com.cn> wrote in message > > news:uCNZ7Dq$EHA.2552@TK2MSFTNGP09.phx.gbl... > >> PS: I have only linux source code. > >> > >> -- > >> Best wishes > >> Wang Yeqing > >> *********************************************************** > >> Intelligent Grouping Research and Development Institute > >> Amoi Electronics Co., Ltd > >> > >> Tel: 86-592-6516777-6516 > >> *********************************************************** > >> > >> "Wang Yeqing" <wangyq@amoi.com.cn> > > 写入消息新闻:uN0IQ2p$EHA.2568@TK2MSFTNGP11.phx.gbl... > >> > > >> > Hi, > >> > I am trying to do this work on converting linux ethernet driver to > >> > wince > >> > driver.Because we have a lot of this ethernet card. > >> > It is D-link DFE-670TXD.It is a PCMCIA 10/100Mbps NWay fast ethernet PC > >> > card. > >> > and it is compatible with NE2000. > >> > > >> > I have source code of this driver. > >> > > >> > Unfortunately,I have no data *** about this ethernet card.So I can > >> > not > >> > understand > >> > the source code. > >> > > >> > Could some one give suggestions about how to do this work Or how Can I > > get > >> > data *** of this card? > >> > Is data *** of this card a business secret and I can NOT get it? > >> > > >> > -- > >> > Best wishes > >> > Wang Yeqing > >> > *********************************************************** > >> > Intelligent Grouping Research and Development Institute > >> > Amoi Electronics Co., Ltd > >> > > >> > Tel: 86-592-6516777-6516 > >> > *********************************************************** > >> > > >> > > >> > >> > > > > > >
- Next message: Yannick Chamming's [eMVP]: "Re: Accessing Memory from OAL"
- Previous message: Yannick Chamming's [eMVP]: "Re: I can't Remote Desktop into CE device!"
- In reply to: Wang Yeqing: "Re: How to convert linux ethernet driver to wince driver"
- Next in thread: Wang Yeqing: "Re: How to convert linux ethernet driver to wince driver"
- Messages sorted by: [ date ] [ thread ]