Re: How to develop CAN bus driver in CE?

From: voidcoder (voidcoder_at_yahoo.com)
Date: 01/07/05 

Date: Fri, 7 Jan 2005 09:45:09 +0100

Sorry, it should be new thread.

"voidcoder" <voidcoder@yahoo.com> wrote in message
news:O5LBBTJ9EHA.3676@TK2MSFTNGP10.phx.gbl...
> Dear CE gurus,
>
> does anybody know what are the differences between
> Windows CE 5.0 retail and Windows CE evaluation
> edition? Will the BSP developed and tested with retail
> PB 5.0 work for BP 5.0 evaluation edition?
>
> Thanks
>
>
> "hcl" <hclvisi@hotmail.com> wrote in message
> news:eaWXFOJ9EHA.3640@tk2msftngp13.phx.gbl...
> > Thank Yannick!
> > I know CAN bus driver should be a stream interface drivers, but how do
> users
> > set some parameters such baud rate and timeout ? through IOControl or
> other
> > interface that I define?
> >
> >
> >
> >
> > "Yannick Chamming's [eMVP]" <ychammings_nospam@adeset.com> wrote in
> message
> > news:uC0lIbI9EHA.1228@tk2msftngp13.phx.gbl...
> > > You should probably develop a stream interface driver that will allow
> you
> > > communicating on CAN bus using stream interfaces such as Read or
Write.
> > >
> > >
> > > --
> > > ----------------------------------------------------------------
> > > Yannick Chamming's (eMVP)
> > > ADESET
> > > Windows Embedded Manager
> > > ychammings AT adeset DOT com>
> > > http://www.adeset.com
> > > Tél : +33 (0)4.72.18.57.77
> > > Fax : +33 (0)4.72.18.57.78
> > > ----------------------------------------------------------------
> > >
> > > "hcl" <hclvisi@hotmail.com> wrote in message
> > > news:uG6lpzH9EHA.2568@TK2MSFTNGP10.phx.gbl...
> > > > Hi all,
> > > > now I want to develop CAN bus driver, but dont know how to start.
> > > > where may I find can bus driver source codes or who may give some
> glues
> > or
> > > > source codes?
> > > >
> > > > thanks!
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Relevant Pages

  • Re: Slipstreaming XPSP3
    ... attempts to slipsteam SP's, using 2 or 3 different methods ... Although Dell is so close to the retail versions, ... but I guess Windows could have one, and call it by the same name. ... I have used the administrator password for Windows and that worked as ...
    (alt.sys.pc-clone.dell)
  • Re: showing code in vb2005
    ... The reason I say this is because I remember once purchasing a full retail copy of Windows XP Professional from the Micr$oft Shop some time ago, ... It was a full version in its full retail box and packaging with a full licence, exactly the same as would be picked up off the shelf if you bought it from a shop. ... Secondly it tells me that Micro$oft are not in any way prevented from exporting copies of their operating systems from America to the UK, because that's exactly what they did! ...
    (microsoft.public.vb.general.discussion)
  • Re: Repair/upgrade using Retail Vista to fix bad OEM
    ... has the dreaded empty list in "Turn Windows options on ... Is it possible to do a repair/upgrade with a retail copy ... not my Vista Premium Retail. ... you can do an upgrade installation with a retail dvd and yes you can use the product key on the sticker rather than the one in the retail box. ...
    (microsoft.public.windows.vista.installation_setup)
  • Re: Slipstreaming XPSP3
    ... to slipsteam SP's, using 2 or 3 different methods including ... Although Dell is so close to the retail versions, ... but I guess Windows could have one, and call it by the same name. ... I coudl also try a Dell Pro sp1, 2, or 3, if you want me too. ...
    (alt.sys.pc-clone.dell)