Secondary IDE slave

From: cmello (cmello_at_discussions.microsoft.com)
Date: 12/29/04 

Date: Wed, 29 Dec 2004 09:05:07 -0800

Hi,

How can I make Windows CE detect a hard disk connected to the second IDE
as Slave? If I connect it as MASTER it is detected. The hardware is an
embedded
PC.

I can successfully access the hard disk with the same configuration using a
DOS disk or FreeBSD.

Thank you a lot for the attention.
Mello

Relevant Pages

  • Re: installing a hard drive as a slave
    ... Remember that when you add an extra drive as a slave it is sometimes ... necessary to change the first drive to "master". ... >>> pins ... >> What you need to do is to take your hard disk and look carefully ...
    (microsoft.public.windowsxp.hardware)
  • Re: two linux hard disks
    ... both configured as master and both was installed with SUSE Linux ... Now I want to move the hard disk 2 to the first machine and let it ... master and new slave disk. ... this will become (ignore the swap for the moment) ...
    (alt.os.linux.suse)
  • Re: DVD Drive disappeared
    ... although not from the BIOS. ... > Master: Hard Disk ... > Slave: New hard disk. ...
    (microsoft.public.windowsxp.hardware)
  • Re: DVD Drive disappeared
    ... although not from the BIOS. ... > Master: Hard Disk ... > Slave: New hard disk. ...
    (microsoft.public.windowsxp.general)
  • Re: DVD Drive disappeared
    ... Windows configured the secondary IDE device to use DMA. ... > I just added a hard disk to my PC and the DVD drive disappeared from ... > Master: Hard Disk ... > Slave: New hard disk. ...
    (microsoft.public.windowsxp.hardware)