need help physical memory eboot

From: Peter (arockiarajeshpeter_at_harita_dot_com)
Date: 12/29/04 

Date: Wed, 29 Dec 2004 01:05:02 -0800

Hi,

I am using PXA255, Lubbock BSP, WinCE 4.2.

I'm able to download the OS image using my Physical memory Eboot.
But, eboot is not jumping to the kernel start. The same code is working fine
for Jumping to OS kernel using Virtaul memory.

I just modified the respective address from virtual to physical memory.
Then, I tested i could reach the Launch () function and from there i am not
able to jump to the KernelStart().

Is any other thing i need to take care while convertig a Virtual Eboot o
Physical Eboot?

Please help me out.

Thanks & Regards,
Peter

Relevant Pages

  • Problem in bringing up (WinCE5.0) kernel on SMDK2440A board
    ... eboot binary images) directly into RAM using Trace32. ... Desktop losing ACK, block number = 22429, Ack again ... Old or invalid version stamp in kernel structures - starting clean! ... But when I press "Go" for number of times on Trace32 following message is ...
    (microsoft.public.windowsce.platbuilder)
  • Re: setting baud rate
    ... I am using eboot as my loader, and I changed the baud rate in eboot by ... so if this also gets built into the kernel, I guess I have not "rebuilt" ... baud rate issue on my com1 port, When the bios boots my card it ...
    (microsoft.public.windowsce.platbuilder)
  • Re: KITL ethernet driver in windows CE 6.0 fails
    ... Generally the addressing for EBOOT is setup as Physical is Virtual, ... and once the kernel boots everything becomes Virtual addressing. ... KITL routines are hardcoded to use Physical addresses. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Multiple target libraries from a single sources file
    ... You should rather do it the same way as the kernel build ... of each BSP: you have one directory for code and different directories for ... the same code a lib linked with eboot for flash access from eboot and a dll ... which is the flash applicative driver. ...
    (microsoft.public.windowsce.platbuilder)