Re: CE 5 BSP For XScale Board

From: Dave Heil \(eMVP\) (nospam_at_vytek.com)
Date: 12/28/04 

Date: Tue, 28 Dec 2004 10:17:18 -0800

On Tue, 28 Dec 2004 03:53:02 -0800, "David Jones"
<davejones@rmit.edu.au.nospamplease> wrote:

>I have some Intrinsyc XScale (Cerfboard 255) boards for CE 4.2.
>Intrinsyc don't seem to have a CE5 BSP on offer for the board.
>I don't have the BSP source code so porting isn't an option.
>Is there any 3rd party alternatives?

Port the MainstoneII (PXA27x) BSP which come with CE 5.0 to your
board.

Dave Heil
Vytek Inc.

Relevant Pages

  • Re: CEPC Porting Issues...
    ... So you mean to say that i need to Build an OSDesign first with CE 6.0 BSP ... porting steps than this will work fine... ... I think my Build environment for the BSP port is not proper. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: CEPC Porting Issues...
    ... Orca - the CEPC 6.0 BSP should work. ... Can you please tell me how do i port or if possible ... Porting demo as reference. ... I think my Build environment for the BSP port is not proper. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Porting BSP from Vxworks 6.2 to 5.5
    ... Most of the drivers are compatible in VxWorks ... on simple compilation first. ... We have done same kind of porting from 6.2 to 5.5. ... It seems like 440GR BSP is developed only for 6.x. ...
    (comp.os.vxworks)
  • Re: Performance issue between 4.2 and 5.0 on SMDK2410
    ... better reading or an easier adaptation when porting to another board. ... I don't have experiences on SMDK2410 with CE 5.0, ... it's more likely a setting missing in CE 5.0 SMDK BSP, ... > I used the BMQ to test the WinCE 4.2 and 5.0 on the samsung demo board. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: the first splash screen
    ... If your msi just adds a pbworkspace subdir, that means you just have an OS ... design project (no BSP), and this OS Design is using a preinstalled BSP. ... the BSP source code. ...
    (microsoft.public.windowsce.platbuilder)