Failed calling bin2xip.exe .... ??

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Yu (Yu.Mails_at_msa.hinet.net)
Date: 12/13/04 

Date: Mon, 13 Dec 2004 21:29:35 +0800

Hi,

When I build a XIP image of WinCE 4.2, although it is successfull, the
following warning messages are shown.
Why is f4b51000 shown in those messages ?
I do not write "f4b51000" address in my config.bib.
What's that ?
How to fix these warning messages ?

Thanks.

Yu.

Warning Messages:
----------------------------------------------------------------------------
--------------------------------------------
.....
Writing C:\WINCE420\PUBLIC\CoreOS\RelDir\SAMSUN~1\NK.bin
Failed calling bin2xip.exe
C:\WINCE420\PUBLIC\CoreOS\RelDir\SAMSUN~1\chain.bin
C:\WINCE420\PUBLIC\CoreOS\RelDir\SAMSUN~1\privkey.dat
Warning: Record starting at f4b51000 is outside of rom range, skipping...
Warning: Record starting at f4b51040 is outside of rom range, skipping...
Warning: Record starting at f4b52000 is outside of rom range, skipping...
Warning: Record starting at f4bf5e38 is outside of rom range, skipping...
Warning: Record starting at f4c0d000 is outside of rom range, skipping...
Warning: Record starting at f4c1b000 is outside of rom range, skipping...
Warning: Record starting at f4c24000 is outside of rom range, skipping...
Warning: Record starting at f4c2d000 is outside of rom range, skipping...
.....
----------------------------------------------------------------------------
--------------------------------------------

My config.bib is shown in the following:
  --------------------------------------------------------------------------
----------------------------------------------

     #define XIPKernelStart 8c200000
 #define XIPKernelLEN 00150000

 #define RAMSTART 8C351000
 #define RAMLEN 03CAF000

 #define XIPCHAIN_LEN 00001000
 #define XIPLOC_PHYSICAL 8C350000

     #define EDBGSTART 8c010000
     #define EDBGLEN 00038000

 COREKERNEL $(XIPKernelStart ) $(XIPKernelLEN ) RAMIMAGE
 NK 80D51000 01700000
NANDIMAGE
 RESERVE $(XIPLOC_PHYSICAL) $(XIPCHAIN_LEN)
 RAM $(RAMSTART) $(RAMLEN)
RAM
 EDBG $(EDBGSTART) $(EDBGLEN)
RESERVED
 pdwXIPLoc 00000000 $(XIPLOC_PHYSICAL)
FIXUPVAR

#define PAGINGPOOLSIZE 00200000

; Common RAM areas
 AUD_DMA 8c002000 00002000 RESERVED
 DRV_GLB 8c010000 00010000 RESERVED
 DBGSER_DMA 8c022000 00002000 RESERVED
 SER_DMA 8c024000 00002000 RESERVED
 IR_DMA 8c026000 00002000 RESERVED
 SD_DMA 8c028000 00008000 RESERVED
 EDBG 8c030000 00020000 RESERVED
 CPXIPCHAIN 8c050000 00008000 RESERVED
 SLEEP_BUFF 8c058000 00004000 RESERVED
 DISPLAY 8c100000 00100000 RESERVED

CONFIG

   COMPRESSION=ON
   KERNELFIXUPS=ON
   AUTOSIZE=ON
   ROM_AUTOSIZE=OFF
   RAM_AUTOSIZE=OFF
   DLLADDR_AUTOSIZE=ON
   XIPSCHAIN=$(XIPLOC_PHYSICAL)

IF IMGPROFILER
 PROFILE=ON
ENDIF
IF IMGPROFILER !
 PROFILE=OFF
ENDIF

   ROMFLAGS=0

   ROMSTART=$(XIPKernelStart )
   ROMWIDTH=32
  ROMSIZE=01700000

Relevant Pages