Re: CE5.0 VIA VT6212 Driver Problem

From: Yannick Chamming's [eMVP] (ychammings_nospam_at_adeset.com)
Date: 11/29/04

Next message: Yannick Chamming's [eMVP]: "Re: WinCE 4.2 .net and USB"
Previous message: K. S. Huang: "Re: Intel Pro 100 (82559) on x86"
In reply to: MKossiek: "Re: CE5.0 VIA VT6212 Driver Problem"
Next in thread: MKossiek: "Re: CE5.0 VIA VT6212 Driver Problem"
Reply: MKossiek: "Re: CE5.0 VIA VT6212 Driver Problem"
Messages sorted by: [ date ] [ thread ]

Date: Mon, 29 Nov 2004 07:43:15 +0100

It looks like the driver is not acknowledging IRQ correctly.

--
----------------------------------------------------------------
Yannick Chamming's (eMVP)
ADESET
Windows Embedded Manager
ychammings AT adeset DOT com>
http://www.adeset.com
Tél  : +33 (0)4.72.18.57.77
Fax : +33 (0)4.72.18.57.78
----------------------------------------------------------------
"MKossiek" <matthias.kossiek@inosoft.com> wrote in message
news:#q4r#a80EHA.2620@TK2MSFTNGP10.phx.gbl...
> Every keystroke comes 12 times.
>
>
> "MKossiek" <matthias.kossiek@inosoft.com> wrote in message
> news:e01GJ770EHA.1196@TK2MSFTNGP15.phx.gbl...
> > Hi,
> > has anybody experience with the VIA VT6212 USB Chip?
> > We are developing a CE5.0 Image with this USB Chip. I included the ehci
> and
> > uhci USB host drivers and keyboard / mouse HID. EHCI and UHCI dlls are
> > loaded at boot. Connecting a USB mouse or keyboard seems to be ok ( from
> > Debug output ) but the mouse pointer is jumping uncontrollable around.
> > Inputs from Keyboard make funny effects: For example pressing the
"windows
> > key" once opens "taskbar->start" and then closes it.. opens it, closes
> > it....
> >
> > I tried the original VIA EHCI driver for CE4.2 but it throws exceptions.
I
> > think its not compatible with Ce5.0.
> >
> > Any ideas?
> >
> > Debug output from Mouse:
> >
> >  956649 PID:c3f91092 TID:3d37fbe 0x83d37c04: CHub(Root tier
> > 0)::HubStatusChangeThread - port 4, change = 0x0001, status = 0x0500
> >  956915 PID:c3f91092 TID:3d6aaa6 0x83db262c: !!!Warning!!! Setting
> > resume/suspend/reset bits of USBCMD
> >  957509 PID:c3f91092 TID:3d6aaa6 0x83db262c: CHub(Root tier 0)::
> > ResumeNotification(0) !
> >  957510 PID:c3f91092 TID:3d6aaa6 0x83db262c: CHub(Root tier 0)::
> > ResumeNotification(0) !
> >  957612 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::HubStatusChangeThread - port 2, change = 0x0001, status = 0x0301
> >  957714 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::HubStatusChangeThread - device attached on port 2
> >  957715 PID:c3f91092 TID:3d539ae 0x83d53800: +CHub(Root tier
> > 0)::AttachDevice - port = 2, fIsLowSpeed = 1
> >  957716 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE,
> > failures = 0
> >  957717 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0,
failures
> =
> > 0
> >  957718 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT,
> > failures = 0
> >  957781 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures = 0
> >  957794 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS,
> > failures = 0
> >  958818 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0,
failures
> =
> > 0
> >  958830 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures
=
> 0
> >  959842 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR, failures = 0
> >  960867 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SETUP_CONFIGURATION_DESCRIPTOR_ARRAY, failures = 0
> >  960868 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_CONFIG_DESCRIPTOR, failures
=
> 0
> >  961891 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_CONFIG_DESCRIPTOR, failures = 0
> >  962915 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE,
> > failures = 0
> >  962916 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - Select Configuration 0 on
> > DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE step
> >  962918 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_CONFIG,
> > failures = 0
> >  963939 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_CREATE_NEW_FUNCTION,
> > failures = 0
> >  963941 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY,
> > failures = 0
> >  963942 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures
=
> 0
> >  963950 PID:c3f91092 TID:3d539ae 0x83d53800: >>> Loading module
> hidparse.dll
> > at address 0x03790000-0x0379F000 (RW data at 0x01F74000-0x01F74474)
> > Loaded symbols for
> >
>
'C:\WINCE500\PBWORKSPACES\MICROBOX50\RELDIR\INO_CEPC_X86_DEBUG\HIDPARSE.DLL'
> >  963966 PID:c3f91092 TID:3d539ae 0x83d53800: >>> Loading module
usbhid.dll
> > at address 0x03800000-0x03812000 (RW data at 0x01F80000-0x01F80540)
> > Loaded symbols for
> >
'C:\WINCE500\PBWORKSPACES\MICROBOX50\RELDIR\INO_CEPC_X86_DEBUG\USBHID.DLL'
> >  964080 PID:c3f91092 TID:3d539ae 0x83d53800:
> DEVICE!RegReadActivationValues
> > RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Instance\Prefix) returned
2
> >  964082 PID:c3f91092 TID:3d539ae 0x83d53800:
> DEVICE!RegReadActivationValues
> > RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Instance\BusPrefix)
returned
> 2
> >  964083 PID:c3f91092 TID:3d539ae 0x83d53800:
> DEVICE!RegReadActivationValues
> > RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Hid_Class\BusPrefix)
> returned
> > 2
> >  964086 PID:c3f91092 TID:3d539ae 0x83d53800: +USBD:OpenPipe, EP: 0x81,
> > MaxPkt: 4, Type: Interrupt
> >  964087 PID:c3f91092 TID:3d539ae 0x83d53800: CInterruptPipe::OpenPipe -
> > setting the poll interval to 8 ms instead of 10 ms
> >  964088 PID:c3f91092 TID:3d539ae 0x83d53800: -USBD:OpenPipe success,
hPipe
> =
> > 369080
> >  964091 PID:83c57f86 TID:e3f84e1e 0x83f91e34: [NOTIFY] HandleSystemEvent
7
> > /ADD HID1:
> >  965760 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Preparing to
> > Allocate memory
> >  965761 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Top Level
> Collection
> > 1 found
> >  965762 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Enter Link
> > Collection
> >  965763 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Exit Link
> Collection
> >  965764 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Collection 1
exit
> >  965765 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Starting Parsing
> > Pass
> >  965766 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Parse Collection
1
> >  965767 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Main Offset:8
> >  965768 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Main Offset:b
> >  965769 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Main Offset:10
> >  965770 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'X Parse
Collection
> 1
> >  967810 PID:c3f91092 TID:3d539ae 0x83d53800: >>> Loading module
mouhid.dll
> > at address 0x03760000-0x03765000 (RW data at 0x01F6E000-0x01F6E4A8)
> > Loaded symbols for
> >
'C:\WINCE500\PBWORKSPACES\MICROBOX50\RELDIR\INO_CEPC_X86_DEBUG\MOUHID.DLL'
> >  975900 PID:c3f91092 TID:3d539ae 0x83d53800: -CHub(Root tier
> > 0)::AttachDevice - port = 2, fIsLowSpeed = 1, address = 1
> >
> >
> > Debug output from Keyboard:
> >
> > 1026431 PID:c3f91092 TID:3d6aaa6 0x83db262c: !!!Warning!!! Setting
> > resume/suspend/reset bits of USBCMD
> > 1027025 PID:c3f91092 TID:3d6aaa6 0x83db262c: CHub(Root tier 0)::
> > ResumeNotification(0) !
> > 1027026 PID:c3f91092 TID:3d6aaa6 0x83db262c: CHub(Root tier 0)::
> > ResumeNotification(0) !
> > 1027128 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::HubStatusChangeThread - port 2, change = 0x0001, status = 0x0301
> > 1027230 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::HubStatusChangeThread - device attached on port 2
> > 1027231 PID:c3f91092 TID:3d539ae 0x83d53800: +CHub(Root tier
> > 0)::AttachDevice - port = 2, fIsLowSpeed = 1
> > 1027232 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE,
> > failures = 0
> > 1027233 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0,
failures
> =
> > 0
> > 1027234 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT,
> > failures = 0
> > 1027297 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR_TEST, failures = 0
> > 1027866 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS,
> > failures = 0
> > 1028890 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_LEAVE_ADDRESS0,
failures
> =
> > 0
> > 1028902 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_DEVICE_DESCRIPTOR, failures
=
> 0
> > 1029914 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_DEVICE_DESCRIPTOR, failures = 0
> > 1030938 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SETUP_CONFIGURATION_DESCRIPTOR_ARRAY, failures = 0
> > 1030940 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_INITIAL_CONFIG_DESCRIPTOR, failures
=
> 0
> > 1031963 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SCHEDULING_GET_CONFIG_DESCRIPTOR, failures = 0
> > 1032987 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE,
> > failures = 0
> > 1032988 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - Select Configuration 0 on
> > DEVICE_CONFIG_STATUS_DETERMINE_CONFIG_TO_CHOOSE step
> > 1032989 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_CONFIG,
> > failures = 0
> > 1034010 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_CREATE_NEW_FUNCTION,
> > failures = 0
> > 1034011 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_INSERT_NEW_DEVICE_INTO_UPSTREAM_HUB_PORT_ARRAY,
> > failures = 0
> > 1034013 PID:c3f91092 TID:3d539ae 0x83d53800: CHub(Root tier
> > 0)::AttachDevice - status =
> > DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures
=
> 0
> > 1034021 PID:c3f91092 TID:3d539ae 0x83d53800: >>> Loading module
> hidparse.dll
> > at address 0x03790000-0x0379F000 (RW data at 0x01F74000-0x01F74474)
> > Loaded symbols for
> >
>
'C:\WINCE500\PBWORKSPACES\MICROBOX50\RELDIR\INO_CEPC_X86_DEBUG\HIDPARSE.DLL'
> > 1034035 PID:c3f91092 TID:3d539ae 0x83d53800: >>> Loading module
usbhid.dll
> > at address 0x03800000-0x03812000 (RW data at 0x01F80000-0x01F80540)
> > Loaded symbols for
> >
'C:\WINCE500\PBWORKSPACES\MICROBOX50\RELDIR\INO_CEPC_X86_DEBUG\USBHID.DLL'
> > 1034154 PID:c3f91092 TID:3d539ae 0x83d53800:
> DEVICE!RegReadActivationValues
> > RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Instance\Prefix) returned
2
> > 1034155 PID:c3f91092 TID:3d539ae 0x83d53800:
> DEVICE!RegReadActivationValues
> > RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Instance\BusPrefix)
returned
> 2
> > 1034157 PID:c3f91092 TID:3d539ae 0x83d53800:
> DEVICE!RegReadActivationValues
> > RegQueryValueEx(Drivers\USB\ClientDrivers\Hid\Hid_Class\BusPrefix)
> returned
> > 2
> > 1034159 PID:c3f91092 TID:3d539ae 0x83d53800: +USBD:OpenPipe, EP: 0x81,
> > MaxPkt: 8, Type: Interrupt
> > 1034160 PID:c3f91092 TID:3d539ae 0x83d53800: CInterruptPipe::OpenPipe -
> > setting the poll interval to 8 ms instead of 12 ms
> > 1034161 PID:c3f91092 TID:3d539ae 0x83d53800: -USBD:OpenPipe success,
hPipe
> =
> > 36E9B0
> > 1034169 PID:83c57f86 TID:e3f84e1e 0x83f91e34: [NOTIFY] HandleSystemEvent
7
> > /ADD HID1:
> > 1035864 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Preparing to
> > Allocate memory
> > 1035865 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Top Level
> Collection
> > 1 found
> > 1035866 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Collection 1
exit
> > 1035867 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Starting Parsing
> > Pass
> > 1035868 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Parse Collection
1
> > 1035869 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Main Offset:8
> > 1035870 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Main Offset:10
> > 1035871 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Out offset:8
> > 1035872 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Out offset:b
> > 1035873 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'Main Offset:18
> > 1035874 PID:c3f91092 TID:3d539ae 0x83d53800: HidParse: 'X Parse
Collection
> 1
> > 1036890 PID:c3f91092 TID:3d539ae 0x83d53800: >>> Loading module
kbdhid.dll
> > at address 0x03780000-0x03788000 (RW data at 0x01F72000-0x01F724DC)
> > Loaded symbols for
> >
'C:\WINCE500\PBWORKSPACES\MICROBOX50\RELDIR\INO_CEPC_X86_DEBUG\KBDHID.DLL'
> > 1038838 PID:c3f91092 TID:3d539ae 0x83d53800:
> DEVICE!RegReadActivationValues
> > RegQueryValueEx(Drivers\HID\ClientDrivers\Keyboard\BusPrefix) returned 2
> > 1038841 PID:c3f91092 TID:3d539ae 0x83d53800: -CHub(Root tier
> > 0)::AttachDevice - port = 2, fIsLowSpeed = 1, address = 1
> > 1038843 PID:83c57f86 TID:e3f84e1e 0x83f91e34: [NOTIFY] HandleSystemEvent
7
> > /ADD KBD1:
> >
> >
>
>

Next message: Yannick Chamming's [eMVP]: "Re: WinCE 4.2 .net and USB"
Previous message: K. S. Huang: "Re: Intel Pro 100 (82559) on x86"
In reply to: MKossiek: "Re: CE5.0 VIA VT6212 Driver Problem"
Next in thread: MKossiek: "Re: CE5.0 VIA VT6212 Driver Problem"
Reply: MKossiek: "Re: CE5.0 VIA VT6212 Driver Problem"
Messages sorted by: [ date ] [ thread ]

Relevant Pages

Re: Making flash the root file system
... If the block driver is reformatting every bootup, ... file system formats every time you reboot. ... AutoMount - Automatically Mounts each detected partition (if FSD ...
(microsoft.public.windowsce.platbuilder)
USB 2.0 ports not working
... For the USB 2.0 ports we are using a USB Host Controller, ... USB storage device to a USB 1.1 port and the case ...
(microsoft.public.windowsce.platbuilder)
rtl8139 problem
... 1.Does the driver for rtl8139 support RTL8139D chipset? ... 4294768543 PID:e7f768ca TID:e7f7647a NdisMRegisterMiniport: MiniBlock ...
(microsoft.public.windowsce.platbuilder)
Re: Direct3D InvalidDeviceException
... I've removed the null driver by right clicking the driver in the OS ... Formatted Error Code: ... where it fails. ...
(microsoft.public.windowsce.platbuilder)
Re: Configuring WinCE 5.0 for the TME PC104-P3 embedded computer
... FLAT display driver. ... First remove the hive registry component (make ... > Note that you can probably just use the flat display driver, ...
(microsoft.public.windowsce.platbuilder)