ActiveSync over RS232

From: Glenn I. Klausen (glennik_at_idex.no)
Date: 11/26/04 

Date: Fri, 26 Nov 2004 09:04:50 +0100

We are having HW trouble with the USB port on our platform, and I was
wondering if it is possible to run remote tools over ActiveSync and RS232.

If it is, how do we configure the OS image (WinCE 4.2 .net and OMAP 1610
  H2 with surfer board) or AS to use RS232?

Glenn

Relevant Pages

  • Re: Windows CE 6.0 remote tools broken?
    ... I've debugged and used remote tools with CE6 over enet, ... activesync in a while, and I've never done managed applications. ... I can succesfully build an OS in platform builder CE 6.0, ... With my previous activesync debugging experience the process of ...
    (microsoft.public.windowsce.platbuilder)
  • Re: CE 6.0 and PlatMan remote tools
    ... target) with remote tools using ActiveSync 4.5. ... ActiveSync connection and my device are working properly. ... messages in the "CE Tools" event log when I startup the PlatMan remote ... No matching files found for package cemgrc.exe ...
    (microsoft.public.windowsce.platbuilder)
  • CE 6.0 and PlatMan remote tools
    ... target) with remote tools using ActiveSync 4.5. ... ActiveSync connection and my device are working properly. ... messages in the "CE Tools" event log when I startup the PlatMan remote ... No matching files found for package cemgrc.exe ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Remote Tools not connecting
    ... Can you check if platform manager is configured to use CESH + KITL ... > - Enable CE Target Control Support ... > it yields the same result (remote tools not working, ... >>> remote connection as Ethernet for both Download and Kernel Transport, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: How TO configure ActiveSync for working via Ehernet(TCP/IP)
    ... Again, forget about AS, if all you want to do is debug and remote tools. ... > I have succeeded in implementing the Activesync over serial port. ... > want to spare this serial port for normal use, while use the ethernet ...
    (microsoft.public.windowsce.platbuilder)